New Controls and Controllers Products

Flow Monitor/Batch Controllers work with flow meters.

Model HPD-FEM provides flow rate, total, or ratios. Outputs can be programmed to perform limit, warning, or alarm functions. Model HPD-FEMA has 4-20 mA output to track data remotely, while Model HPD FEM A2 has 2 channels to monitor dual flows. Model HPD-BAC features 9 programmable batch amounts, batch counter and totalizer, and batch error compensator. Two relays for solenoid VA control are...

Graphics Controller Card supports multiple displays.

PC-MIP mezzanine card P17 drives 2 independent digital displays with identical or different screen content. It features 235 MHz, 24 bit random access memory digital-to-analog converter and is capable of driving 2 separate panels or one UXGA panel. Product utilizes SM731 display and 16 MB of graphics RAM and offers screen resolutions to 1600 x 1200 pixels. It features Digital Video...

Odor Control Systems suit various applications.

MICROCAT-®-XBS Hydrocarbon Degrader uses thiophilic microorganisms to eliminate rotten egg smell from disturbed oil-filled ponds. MICROCAT-DNT drain and trap cleaner uses same bacteria to oxidize sulfur compounds in plumbing systems. MICROCAT-ECL is a non-microbial, food-grade cleaner/deoderizer. MICROCAT-ANL controls sulfide odors in wastewater treatment plants and sludge processing facilities....

PCI Mezzanine Card suits telecom applications.

Optimized for distributed multiprocessing, PmPPC2750 Processor PMC card enables telecom OEMs to add processing power to systems equipped with PMC expansion sites. It features two 800 MHz IBM PowerPC PPC750FX processors, each with 512 kbytes of L2 cache; Marvell Discovery GT-64260B PCI bridge with 133 MHz Processor Bus; and up to 512 MBytes of shared SDRAM. Unit also provides two 10/100 BaseT...

Managing the New FGD Wastewater Regulations

A guide for managing Flue Gas Desulfurization wastewater using leading technologies.

Temperature Controllers offer optional operator interface.

Microprocessor-based Series CV provides basic on/off control. Operator interface allows user to view or adjust application's desired set point temperature value while controller is operating in normal steady state. Operators depress Push-to-Set key while rotating Set Point Selection knob to desired set point value. Controllers come in square 1/8 DIN panel mount, DIN-rail mount, or open board...

Controller has integrated development environment.

PACSystems(TM) RX3i features single control engine and universal programming environment that provides application portability across multiple hardware platforms. It utilizes PCI-based backplane and Pentium-® 300 mHz CPU and provides I/O with diagnostics and interrupts. Communications capabilities include integrated Ethernet and Profibus(TM) modules as well as support for DeviceNet(TM) and...

A/V Component is equipped with RS-232 interface.

Panamax MAX-® 5410 Pro custom, installer-centered component distributes clean power to systems in automated homes and features RS-232 interface for home automation system compatibility. It has 12 V-in and -out triggers that control start-up, shut down, and automation functions; surge protection; and component-specific power conditioning. Additional features include 6 LED diagnostic lights;...

System-On-Chip communicates through Active X software.

FlexController(TM) FCIC010 enables control, automation, and data acquisition in power, motion, lighting, and flow applications. It features 16 total I/O, 5 analog inputs, 1 interval timer, 1 event counter, 1 running clock, 3 power driver outputs, and EEPROM calibration. Embedded operating system performs digital filtering, error detection, and synchronization of hardware events.

Ethernet Controller works with SNAP Ethernet-based I/O units.

Stand-alone SNAP-LCE is programmed with included ioControl(TM) flowchart-based control programming software. Built-in 10/100 Mbps Fast Ethernet port attaches controller to Ethernet networks, computers on network running industrial automation software, and Ethernet-based I/O systems. SNAP-LCE can process analog, digital, and serial signals, making it suited for process control and discrete...

Viscosity Control System monitors up to 10 stations.

VISC6000 in-line control system is suited for monitoring and controlling viscosity of printing inks; lacquers; adhesives; mirror, wire, can, and needle coatings; and chemicals. Able to be used with any Norcross viscosity sensor, it handles up to 10 process/printing stations via touch screen operator interface, which supports multiple languages in menus and for messages.

Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard

Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.