New Controls and Controllers Products

Microcontroller targets battery-operated devices.

Eight-pin Model EM6580 combines 4-bit ADC or 12-level voltage level detector and on-chip Flash memory in SO-8 package. It consumes 3.3 Ã-µA in standby mode, 5.8 Ã-µA in active mode, and requires no external components. Supported by Windows-based simulator and emulator tools, unit features 4 k x 16-bit flash memory, 5 or 6 I/Os with 2 high drive outputs of 20 mA, power-on-reset with...

DC/DC Controller eliminates need for transformers.

Using 2 inductors, step-up, 2-phase Model LT3782 can regulate 50 V output at 4 A load current with 96% efficiency from input source of 10-36 V. Unit includes adjustable slope compensation, time delay, and undervoltage lockout, as well as synchronous operation and clock synchronization. Operating from input range of 6-40 V, Model LT3782 uses constant frequency 150-500 kHz current mode...

Limit Controllers utilize optional output cards.

Plus Series 1/16, 1/8, and Ã-¼ DIN Controllers shut down process if parameters exceed preset limits. To prevent safety hazards and equipment damage in oven/furnace, plastics, and packaging industries, they have latching relay that cannot be reset until process is in safe condition. Units offer auto-detection of hardware modules, front panel HMI with dual display, and PC configuration...

Integrated Stepper Module controls up to 5 stepper motors.

Five Axis Integrated Stepper Module runs on distributed block I/O network, and consumes 3 of 77 available block I/O slots in control system. It includes stepper translator so output is connected directly to stepper motor eliminating need for stepper drive. Five channels of SSI encoder feedback are available for position verification of each stepper motor being controlled. Stepper motion profiles...

There's More to Plating than You Zinc!

To find out more about the seven demands you should make of your zinc plater, download now.

Motion ICs directly support CANbus interface.

Available in 1- to 4-axis configurations, Magellan programmable motion processors control dc brush, brushless dc, microstepping, and pulse and direction motors. They provide profile generation, servo loop closure, PLC-style signal manipulation, and motor signal generation. Featuring programmable PID filter with velocity and acceleration feedforward, ICs also offer 32-bit position error, dual...

Motion Control Toolkit works in IEC61131-3 environment.

Motion Control Solution incorporates normative functionalities based on published PLCopen recommendations. Complete set of motion control function blocks supplied by PLCopen is integrated into ISaGRAF toolset ready-to-use. It offers standardization of programming languages and interface toward different motion control solutions allowimg hardware independence and reusability of software...

Transmitter/Controller accepts up to 3 chlorine probes.

MicroChem(TM)2, available with reagentless, free, and total chlorine probes, features multiple measurement capability and single or dual PID control outputs. Enabling continuous online measurement and control of chlorine dosage, CL4000 probes are designed for bufferless operation and have no moving parts. Multi-parameter, multi-channel system is capable of receiving inputs from up to 3 sensors...

Processor PMC Module is based on PowerPC 440GX processor.

Model PMC721TX operating at up to 800 MHz and features up to 512 Mbytes DDR SDRAM, 8 MB on-board flash memory, and 133 MHz PCI-X bus interface. Processor PCI Mezzanine Card utilizes modular approach to add processing capabilities and can be run as system controller or dedicated I/O processor. Suited for communications and networking applications, product offers front panel support for two...

DC/DC Controller has margining and PLL capabilities.

Able to supply outputs as low as 0.6 V, synchronous, step-down LTC3770 integrates tracking and sequencing functions as well as output margining capability. Constant on-time, valley current mode architecture, combined with minimum on-time of 50 nsec, allows control loop to respond instantly to load steps. Converter uses current mode control and can operate without sense resistor. It features...

Microcontrollers offer nanoWatt power management.

Available in 64- and 80-pin packages, 40 MHz Series PIC18F8722 offers 96 and 128 Kbytes of self-reprogrammable Flash memory with up to 10 MIPS performance over operating voltage range of 2.0-5.5 V. Eight bit units include 4 serial ports, 2 analog comparators, capture/compare/PWM modules with support for MOSFET motor drives, and 16-channel, 10-bit ADC with auto-acquisition timing. Circuits are...

Industry Leading OEM with over 65 Years of Experience

Blonder Tongue Laboratories provides ISO 9001:2015 certified electronic contract manufacturing services at our on-site lab. We specialize in video distribution, fiber optics, and communications but have a variety of services available to bring your products to market. See our video to learn more.