New Controls and Controllers Products

Network Protector eliminates network misuse.

OptimIP(TM) Network Protector enables businesses and IT groups to enforce tight control over internal network usage. It restricts misuse of personal applications, controls network bandwidth abuse, and ensures that mission-critical applications, such as VoIP, Citrix, database, and ERP systems execute consistently. Non-intrusive appliance also enables business to implement selective surveillance of...

Flow Control Module is Internet-ready.

Universal Module allows users to monitor up to 4 flowmeters or flow controllers from anywhere with Internet-connected PC. Controllers are connected using 0-5 Vdc output. Batch control program allows for execution of up to 16 steps in batch process, while flow control program directs flow control through user-defined series of up to 96 steps. All features can be programmed through integrated...

Arc-Resistant Controller suits medium-voltage environments.

CENTERLINE ArcShield controller provides Type 2 arc-resistant protection for safety of personnel working in environments that require voltages from 2,300-7,200 V. Products are available in 18 in. incoming units and 400 A, one-high full-voltage non-reversing (FVNR) controllers. Safety features include arc vents on roof, sealed low-voltage panel, cabinet with 12-gauge steel sheets, and isolated...

Module interfaces between joystick and machine controls.

CL-407 module, configurable as slave module in CAN system, has 4 A available on outputs and 60 mA 5 Vdc regulated supply for providing power to external input devices. Features include 2 switch-to-battery or 8-bit analog inputs, three 0-5 Vdc 12-bit analog inputs, and 7 PWM or digital 4 A sourcing outputs. Module is housed in aluminum extrusion NEMA 4 case with Deutsch DT connectors.

Guide to Fatigue Testing

Learn what fatigue testing is and how fatigue testing service providers can determine the longevity of a part or product.

Temperature Controllers utilize microprocessor for accuracy.

Model 2696-C is designed for cold on/off temperature control while model 2697-C provides cold control with added functionality of defrost cycle control. Controllers provide high accuracy on/off control for temperatures between -40Ã-

Intrusion Detector delivers open-source network security.

Using proprietary Meta Traffic Processor, MTP-1G wire-speed Gigabit Ethernet Network Intrusion Detection and Prevention System supports open-source network security and monitoring applications. Cards pass Gigabit Ethernet traffic between system's 2 ports with 400 ns latency while performing wire-speed, stateful, packet inspection. When determining whether to capture or block packets, cards can...

Directional Control Valve incorporates on-board electronics.

Model 4DP03-3B is rated at 100, 200, or 300 l/min flow rates with 5 bar-per-spool-edge pressure drop, or 500 l/min in double path configuration. It conforms to ISO 4401-07-06-0, CETOP 7, and NFPA 7 standards. Standard M12 connector socket with O-ring seal is supplied for interface connection, providing ramps adjustable up to 10 sec, and 10 V reference voltage for external potentiometer. Optional...

PWM Controllers offer PFC shut-down feature.

Current Mode Controllers Series NCP1230 and NCP1231 allow power supply designers to shut-down power factor correction stage in light or no-load conditions. Units offer cycle skipping at light loads, internal ramp compensation, and frequency dithering. Both series are available in 65, 100, and 133 kHz frequency options. Series NCP1230 integrates 2.5 ms soft-start, while Series NCP1231 offers...

Embedded Controllers suit industrial automation applications.

Power PC Model EPPC-405 incorporates IBM PPC405GP, 32-bit processor with 200 or 266 MHz, enabling performance up to 375 MIPS. It supports IEC61131-3 programming as well as LINUX, RTLinux, QNX, vxWorks, and RTOS operating systems. Unit features Ethernet interface, 1 or 2 electrically isolated CAN interfaces and controllers, and one or two RS-232 serial interfaces. Model EPPC-405-UC offers 2 USB...

Touchscreen Control automates stretch wrappers.

Touchscreen control includes 5 pre-programmed wrap patterns that can be changed by user and switched on the fly. Control also accommodates custom wrap patterns with separate settings for film overlap. Unit includes ANSI-compliant signal light and horn for alarms, alarm history, animated help screens keyed to faults, and combination starters. For in-depth edits, PLC programming software is also...

ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services

J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!