Fail Safe Components use Profibus and Profinet.
Simatic CPU 317F-2 PN/DP fail-safe controller features Profibus and Profinet interfaces, while modular ET 200pro I/O system with IP65/67 protection includes fail-safe Profinet I/Os. Automation solutions for standard and safety-relevant tasks can be generated via Profinet and Profibus using Simatic S7 distributed safety engineering software. Solutions comply with IEC 61508, EN 954, and NFPA 79...
Read More »Weight Controller works with Omron Sysmac CJ1 series PLC.
Suited for weight based process control applications, F159 Plug-In Weigh Module provides direct connectivity to Omron CJ1 series PLC. Connectivity helps simplify setup of operation, reduce wiring and interfacing cables, and reduce system configuration and programming time. Offering data processing speed of 500 times/sec, unit can handle up to four 350 ohm load cells while providing up to 1/40,000...
Read More »
Boiler Cut-Out Device offers upgrade kit.
Series EA-100 Levalarm with upgrade kit replaces original float mechanism and micro switch with conductivity probe and detection relay, eliminating all moving parts. Relay provides 2 independent dry Form C switch contacts. Kit requires no welding, re-work of piping, or adjustments, and takes minutes to install.
Read More »Hot Swap Controller protects load voltages fro 0-6 V.
Low voltage Model LTC4216 allows safe insertion and removal of boards from live backplane. Together with analog current limit amplifier, electronic circuit breaker with adjustable response time provides dual level overcurrent protection. Adjustable soft-start circuitry limits rate of change of inrush at start-up. Offered in 10-lead MSOP and 12-lead DNF packages, Model LTC4216 meets demands of...
Read More »
All About Cable Drag Chains
This ebook provides an in-depth overview into cable drag chains.
Read More »Microcontroller features embedded programmable logic.
Fabricated using 130 nm CMOS technology, GreenFIELD STW21000 combines ARM926EJ-S MIPS RISC processor core, 16-Mbit on-chip eDRAM memory, eFPGA block, and range of analog and digital peripherals. Unit is available with on-chip multiple HDLC controllers, 10/100 Ethernet MACs, multi-channel serial port, and Power-On-Reset function. It is suited for feedforward and digital pre-distortion ratio...
Read More »
Online Controller handles multiple processes.
Suited for water and wastewater treatment industry, WebMaster One connects with USB, Ethernet, modem, or cell modem using digital technologies such as CDMA, GPRS, and GSM. Users can monitor conductivity, pH, and ORP as well as any 4-20 mA and digital inputs such as liquid level, corrosion, inhibitor concentration, temperature, and pressure. Utilizing Internet and ShoulderTap...
Read More »
Process Controller has Amp meter and text displays.
Equipped with Instant AccuracyÃ-® system, 1/4 DIN controller model 3204 provides 5 on-board process recipes, with 48 parameters per recipe, and optional Amp-meter display. Text display helps users use and configure controller. If user scrolls to parameter and waits, text display begins scrolling in marquee fashion. Controller then displays description of that parameter in plain English;...
Read More »
Process Controller carries UL-Listed certification.
Featuring NEMA 4X front and aluminum housing, 3820 series 1/8 DIN controller offers selectable alternating function for pump-up or pump-down applications. Unit incorporates ON-Delay for second pump after power failure condition and can retransmit analog signals to establish direct connection to multiple devices. Controller offers 30-point linearization for non-linear signals, programmable front...
Read More »
High Low Manifold Systems control water temperature.
Models TM-420, TM-520, TM-820, TM-920, TM-1520A, and TM-2020A adjust to varying flow requirements for tempered water in industrial facilities. They feature DURA-trolÃ-® solid bimetal elements, integral supply checkstops, wall supports, cast lever handles, and locked temperature regulators. Products are offered from Ã-¾ in. inlet with 1 in. outlet and flow rates from 1.0-35 gpm to 2 in....
Read More »
Motion Control Card features Ethernet communications.
Motion Control Card uses Ethernet bus to communicate data and to supply power at same time. Ethernet communication allows implementation of protocols already embedded in operating system. Embedded RISC processor is programmed with 4-quadrant, 32-bit PID regulator that refreshes regulation up to 4 KHz. Using card, dc motors with brushes can be controlled in position or speed, as well as position...
Read More »
Oilfield Improvements® Wheeled Rod Guide® Couplings Celebrate 35th Anniversary
For over 35 years our Wheeled Rod Guide Couplings, have been at work in oil fields across the globe. Our products are engineered to extend the service life of sucker rods and tubing, delivering cutting-edge innovation that enhances oilfield operation, maximizes output, and enhancing overall operations. To learn about the advantages of using Wheeled Rod Guide Couplings in your wells, see our video.
Read More »
