RISC Microcontroller includes 2 MB NANO FLASH(TM) memory.

Operating at 54 MHz, 32-bit single-chip MIPS-based Model TMP19A64F20AXBG integrates Model TX19A core with 64 KB RAM. In backup mode, power consumption is 5 Â-µA at 2.7 V. Other built-in functions include 24-channel by 10-bit ADC with conversion speed of 8.44 Â-µs and 8-channel high-speed serial interface. Intended for battery-operated digital consumer applications, device includes...

Read More »

Microcontroller includes high-capacity SuperFlash-® memory.

Designed for medium- to high-end applications, 16-bit Model TMP91FY42FG combines flash memory of 256 Kbytes with 10-bit, 8-channel ADC; 8-channel, 8-bit timer; 2-channel, 16-bit timer; and watchdog timer. Based on Model TLCS-900/L1 processor core, device operates from 2.7-3.6 V. I/O functions include 2-channel SIO/UART, I2C interface, support for IrDA version 1.0 at 115.2 kbps, and 81 I/O ports....

Read More »

CISC Microcontroller targets mobile devices.

Equipped with 288 KB RAM, Model TMP92CZ26AXBG runs at 80 MHz internally to achieve 40 MIPS computing performance with power consumption of 80 mW. Based on 0.18 micron process technology, device integrates 32-bit TLCS-900/H1 CPU core that supports multiple real-time tasks simultaneously. It includes color-ready LCD controller that supports STN and TFT LCDs, full-speed USB device controller, and...

Read More »

Server monitors and manages entire IT infrastructure.

Offering terminal-based, Windows-based, or web-based access and control, Model CM4000 provides remote management of up to 50 computers, servers, routers, switches, or power units from single console and up to 200 devices in clustered arrangement. Secure Desktop Tunneling features provide authentication and encryption with protection against man-in-the-middle attacks. SDTConnector for Windows sets...

Read More »

RISC Processor IC suits real-time display applications.

Integrating 240 MHz, 64-bit, MIPS-based(TM) TX49/H3 RISC CPU with display controller and hardware graphics accelerators in single system-on-chip, Model TX4961XBG-240 is suited for driver information systems, car infotainment systems, and car navigation systems. It includes on-board DDR SDRAM controller, unified memory architecture, and multiple on-chip buses. Housed in 456-pin PBGA, IC also...

Read More »

Robot Controller is ISO/ANSI/CE compliant.

Saving work-cell space, RC7M measures 440 x 425 x 157.5 mm and weighs less than 50 lb. It features 100 Base-T Ethernet, USB, RS-232C, and Mini Parallel I/O, while DeviceNet, Profibus, and Parallel I/O ports are optional. With 3.25 MB memory, RC7M holds up to 10,000 programming steps and 30,000 teach points. Optional accessories include teaching pendant, minipendant, and WINCAPS II 3-D simulation...

Read More »

System on Chip suits embedded control applications.

Based on AVRÂ-®32 core, AP7000 series 32-bit digital signal controllers integrate, on one chip, functionality required for multimedia systems. Features include vectored multiplier co-processor, 32 KB on-chip SRAM, memory management unit, peripheral DMA controller, and support for dynamic frequency scaling of 4 clock domains. Along with 16-bit stereo audio DAC, peripherals include TFT/STN LCD...

Read More »

Controller/Software simplifies complex lighting control.

Allowing for more than 100 available stations, InFusion Controller includes processor, memory, built-in Ethernet jack, and USB port. Infusion Design Center software accompanying controller provides 3rd party device libraries with drag-and-drop menus, facilitating integration of audio video solutions. Program also features savable and reusable customized programming.

Read More »
Input Module adds extra functionality to motion controller.

Input Module adds extra functionality to motion controller.

Exp70-Q1 quadrature encoder input module for 1- and 2-axis RMC70 Series Motion Controllers includes A and B quadrature inputs plus one 12-24 Vdc high speed registration input. Single channel, Â-½ axis, position or velocity reference input enhances RMC70 for geared applications. Up to 32 units can be daisy-chained for gearing up to 64 axes. Module has bi-color status LED to indicate proper...

Read More »

Press Control Package is designed for smaller printers.

PrintLogix Quality Edition (QE) offers core functionality required to help printing companies minimize production waste through common user interface at press and supervisory control levels. While production planning tool helps create impositions and jobs via step-by-step process, integrated ink preset function gathers plate image density information to minimize startup waste. Package also helps...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics