Control Valves

Valve-Control Modules replace analog electronics.
Control Valves

Valve-Control Modules replace analog electronics.

Snapped onto DIN rail, Digital Modules for electrohydraulic proportional valves can be configured to function in same way as various individual analog cards. While 3 modules include drivers for directional (PWD00A-400), throttle (PCD00A-400), and pressure control valves (PWDXXA-400), fourth module replaces accessory cards (PZD00A-400). Each unit, configured over RS232 null-modem cable via Parker...

Read More »
Motorized Control Valves have integrated linear actuators.
Control Valves

Motorized Control Valves have integrated linear actuators.

Available in bronze or stainless steel, 2-way 830 and 3-way 835 Series are manufactured with Â-½-2 in. thread connections and feature self-calibration capabilities. Vibration-resistant products are available for on-off and modulating requirements. Suitable for aggressive and high-corrosive fluids as well as inert gases, hot water, oils, and steam, valves operate with temperatures from -22 to...

Read More »
Control Valves

Emerson Announces ATEX Approval for Fisher® DVC2000 Digital Valve Controller

Newest member of the FIELDVUE® family is approved for use in potentially explosive atmospheres MARSHALLTOWN, IOWA (April 11, 2006) -- Emerson Process Management announces that the Fisher® DVC2000 series digital valve controller now has ATEX Certification to EEx ia 11C T4/T5, making it suitable for use in potentially explosive atmospheres. The Fisher DVC2000 is an intelligent valve...

Read More »
Mix-Dispense Valve delivers miniature material beads.
Control Valves

Mix-Dispense Valve delivers miniature material beads.

Two-component Model 2200-545-037 uses No-Drip® technology for dispensing solvent-based, moisture-curing, and stringy materials such as epoxies, silicones, and polyurethanes. Pneumatically actuated valve opens and closes carbide resin- and catalyst-material passages at mixer entrance to precisely start and stop material flow. It has stainless steel wetted components, dual carbide...

Read More »
Mixing Valve features lockable temperature adjustment knob.
Control Valves

Mixing Valve features lockable temperature adjustment knob.

Suited for commercial and institutional applications, single-fixture Model 108 Thermostatic Water Mixing Valve incorporates 3/8 in. connections and wax element to control temperature. It allows for close approach temperature, so that mix temperature can be within 5°F of hot supply temperature. Valve features bronze body, copper encapsulated thermostat assembly with brass shuttle, stainless...

Read More »
Control Valves

Modular Valve controls compact equipment.

Rated 10.6 gpm and 4,350 psi, VO40 Open-Center Directional Control Valve can be stacked to 10 sections. Optional lock-valve section can be used in applications where no leakage or function drift is allowed. Metering notches on spool lands let operator actuate functions simultaneously, while slotted design of valve sections allows users to add or change sections and functionality. Enclosed handle...

Read More »
Control Valves

Valve Systems suit high water demand applications.

Navigator TMV models S59-3260 and S59-3400 include 2 High-Low thermostatic mixing valves pre-assembled with piping assembly and inlet/outlet shut-off valves to handle water capacity requirements up to 260 and 394 gpm, respectively. Valves blend hot and cold water to regulate water temperature to within 3°. These high-capacity manifold systems are designed to meet needs of casinos,...

Read More »
Control Valves

Mix-Dispense Valve handles dual-component materials.

Model 2200-545-037 uses No-Drip® technology for dispensing miniature beads and small volumes of solvent-based, moisture-curing, and stringy materials such as epoxies, silicones, and polyurethanes. Pneumatically actuated, it is constructed with stainless-steel wetted components, dual carbide ball-and-seat shut-off, safety-closure spring, flow-control adjustment, and balancer eye-hook....

Read More »
Control Valves

Three-Way Control Valves range from 1/2-4 in.

Accepting 3-15 lb air signal, pneumatically actuated Kombat K3 features 36 or 60 sq-in. actuator with spring-loaded packing assembly to minimize deadband. Kombat K7 features rapid-stroke, electric actuator that accepts 0-10 Vdc, 4-20 mA, or 0-135 Ohm signals. Both 3-way control valves have bronze ANSI 250 globe bodies with galvanized union ends and all stainless steel trim. Valves are suited for...

Read More »
Control Valves

Lexair's Self Reciprocating, Magnetically Detented Magna-Cycle Valve Requires No Electrical Interface

LEXINGTON, KY (November 21, 2005) - The Magna-Cycle magnetically detented 4-way control valve from Lexair is a spool type, air pilot actuated valve. An adjustable permanent magnet in each actuating chamber holds the spool in position until the pilot pressure exceeds the holding power of the magnet. This magnetic detent action in the actuating chamber enables automatic control actions to be...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics