Control Valves

General Service Control Valve has fully modular design.
Control Valves

General Service Control Valve has fully modular design.

Available in ANSI and EN versions, Spira-Trol(TM) two-port valve incorporates self-aligning and clamp-in-place internals for ease of maintenance. Hard trim materials and design diffuses discharge from plug and seat, as well as reduces internal flow velocities to minimize internal erosion. Features include cast iron, SG iron, carbon steel, SS, or NACE construction, linear or fast-opening flow, and...

Read More »
Valve features self-aligning, clamp-in-place internals.
Control Valves

Valve features self-aligning, clamp-in-place internals.

Spira-Trol(TM) general service control valve suits range of applications including food and beverage, pharmaceutical, and electronics manufacturing. Hard trim materials and modular design diffuses discharge from plug and seat while also reducing internal flow velocities. Offered with cast iron, SG iron, carbon steel, stainless steel, or NACE construction, valves come in Â-½ to 4 in. sizes...

Read More »
Mini Spool Valve is designed for low-high viscosity fluids.
Control Valves

Mini Spool Valve is designed for low-high viscosity fluids.

Model VMS400 dispenses RTV/Silicones, Solder Pastes and Masks, Sealants, and UV Adhesive with up to 700 lb fluid pressure. Suck-back helps adjust fluid cut-off at end of cycle, while UHMW-PE seals separate wetted materials from pneumatic movement. With minimum shot size of 0.1 cc, valve can cycle up to 400/min using 4-way controller. Device suits applications requiring precision and repeatability...

Read More »
Mini Spool Valve dispenses low- to high-viscosity fuids.
Control Valves

Mini Spool Valve dispenses low- to high-viscosity fuids.

Able to handle up to 700 lb of fluid pressure, Model VMS400 has adjustable Suck-Back so that fluid cutoff at end of cycle can be finely adjusted. Unit features minimum shot size of 0.1 cc and can cycle up to 400/min using 4-way valve controller. Wetted materials are separated from pneumatic movement by UHMW-PE seals. Valve is suitable for use with RTV/silicones, solder pastes and masks, sealants,...

Read More »
Valve controls pressures from full vacuum to 500 psig.
Control Valves

Valve controls pressures from full vacuum to 500 psig.

With slightly enlarged air piloted regulator section, Model QB3H features Nor-Kote(TM) surface finish for high corrosion resistance. Aluminum bodied valve is suitable for most inert gases in high pressure applications, while brass valve is designed and cleaned to specifications for use with oxygen service. NEMA4/IP65 rated units feature stainless steel pressure transducers.

Read More »
Regulating Valves feature field adjustable pressure.
Control Valves

Regulating Valves feature field adjustable pressure.

Direct-acting Model PRV Series C150E regulates high upstream inlet pressure to lower constant downstream outlet pressure within range regardless of water flow. Adjustable, spring-loaded balancing valves are factory set to automatically regulate downstream pressure to 50 psi. Featuring unleaded bronze bodies in sizes Â-½, ¾, and 1 in., units are supplied with pressure range of 15-75...

Read More »
Humphrey GEN2 System Offers Independent Intelligent Control of Multiple Sequential Operations
Control Valves

Humphrey GEN2 System Offers Independent Intelligent Control of Multiple Sequential Operations

The GEN2 (TM) System from Humphrey Products takes the concept of distributed computing to the next logical step: Independent Intelligent Control(TM) of multiple sequential control operations. Instead of a central computer, each GEN2 valve module contains its own on-board programmed logic. This enables each module to communicate directly with other modules, both upstream and downstream, and make...

Read More »
Sensing Valves provide poppet position and state feedback.
Control Valves

Sensing Valves provide poppet position and state feedback.

Featuring dirt tolerant characteristics of poppet technology, Series SV27 is available in 2/2 and 3/2 normally closed functions with single solenoid pilot or remote air pilot actuation. Electrical feedback is provided via positively driven, safety-rated DPDT switch with NO and NC contacts. Switch is actuated whenever valve is not in normal home position. Valves are suited for Category-2 safety...

Read More »
Height Control Valve optimizes air suspension performance.
Control Valves

Height Control Valve optimizes air suspension performance.

Available in dump and non-dump configurations, Height Control Valve features minimal deadband for optimal performance in lightweight, modular package. It has all push-to-connect fittings and universal mounting to work with all applications. Quick operation ensures rapid return to ride height. Valve is suited for trucks, trailers, buses, and recreational vehicles.

Read More »
Leonard Valve Company Offers New Line of Full Port Forged Brass Ball Valves in Sweat and Threaded Models
Control Valves

Leonard Valve Company Offers New Line of Full Port Forged Brass Ball Valves in Sweat and Threaded Models

CRANSTON, RI - A new line of Full Port Forged Brass Ball Valves in Sweat (copper), Threaded and Threaded CP models is now available from Leonard Valve Company, the quality leader in the manufacture of thermostatic water mixing valves. Leonard offers a full line of Full Port Ball Valves, Â-½ through 3" with Sweat or IPS connections. The Threaded-end Ball Valves are available with rough brass...

Read More »

All Topics