Contacts

See ECT's New HyperCore Base Material at the Silicone Valley Test Workshop
Electronic Pins

See ECT's New HyperCore Base Material at the Silicone Valley Test Workshop

Pomona, Calif. - Everett Charles Technologies' (ECT) announces that it will highlight the new HyperCore Base Material in Booth #20 at the upcoming Silicon Valley Test Workshop, scheduled to take place Wednesday, August 29, 2012 at the Biltmore Hotel in Santa Clara, CA. HyperCore is a proprietary base material developed for the highly scalable, fine-pitch ZIP® probe series. HyperCore Base...

Read More »
RF BMA Coaxial Contacts offer dual-level EMI protection.
Contacts

RF BMA Coaxial Contacts offer dual-level EMI protection.

Intended for military telecom and radar fields, D38999 contacts accommodate 0-18 GHz frequencies and can be integrated in each of 16 SOURIAU 38999 layouts featuring 8-gauge sockets. Design work and control of mechanical tolerances ensure RF transmission quality, even in harsh conditions set out in MIL standard. Each contact has its own shielding ring as complement to D38999 shielding ring, and...

Read More »
D38999 with RF BMA Coaxial Contacts
Contacts

D38999 with RF BMA Coaxial Contacts

SOURIAU recently extended its range of D38999 contacts by proposing solutions in the military telecommunications and radar fields. These RF BMA coaxial contacts have been developed for frequencies ranging from 0 GHz to 18 GHz. This means that they are compatible with the main telecom frequencies (Wi-Fi, GSM, WIMAX, Ku band, etc.) and with those used for many types of radar equipment. Specific...

Read More »
Beryllium-Free UCZ Series Connector Saves Valuable Board Space in Handheld Devices...
Contacts

Beryllium-Free UCZ Series Connector Saves Valuable Board Space in Handheld Devices...

ITT's Dry Circuit Pressure Contact Z Series Delivers Green Solution for Smart Phones, Hand-held Devices SANTA ANA, CA - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects and cable assemblies, has developed a new Universal Contact Z (UCZ) for the growing hand-held device market, including smart phones, GPS systems, and medical monitoring devices....

Read More »
Motor Lead Disconnects provide snap-together connection.
Electrical Disconnects

Motor Lead Disconnects provide snap-together connection.

Designed to save time when changing electric motors, Blackburn KUBE® Motor Lead Disconnects are installed by crimping male and female disconnects onto cable, plugging them together, sliding on insulating boot, and securing it in place with cable ties. Units have silver-plated copper contacts and body and stainless steel spring. Coded using Color-Keyed® system, disconnects come in wire sizes...

Read More »
Beryllium Nickel Contacts serve high-temperature applications.
Contacts

Beryllium Nickel Contacts serve high-temperature applications.

Suited for receptacle applications where operating temperature exceeds 150°C, 9 contacts - No. 19, 24, 25, 26, 27, 33, 38, 56, 58 - are made from Beryllium Nickel Alloy 360 (UNS N03360). BeNi is suitable for continuous use up to 250°C and periodic use up to 350°C, without significant loss of its spring properties. Products are available assembled in range of standard...

Read More »
Quadrax Contacts support Ethernet in harsh environments.
Contacts

Quadrax Contacts support Ethernet in harsh environments.

Available to EN3645, EN3646, ARINC 600, and EN2997 standards, No. 8 Quadrax Contacts are suitable for majority of aeronautics connectors. Quadrax connectors can use either 100BaseT protocol over 1 quadrax cable, reaching throughputs of 100 Mbps, or Ethernet 1000BaseTX, which allows transmission up to 1 Gbps over 2 quadrax cables. Contacts offer secure data transmission over 500 mating operations...

Read More »
Universal Ground Contacts optimize internal connections.
Contacts

Universal Ground Contacts optimize internal connections.

Suited for use in elctronic devices, scalable spring fingers (shield fingers) are available in heights from 1.8-3.4 mm and are swappable upon demand. Preload function optimizes working area and contact force, while dimple on contact enhances reliability. Backward-bended tip prevents product from hooking by removing sharp edge, and pick-and-place area on back supports auto assembly processes....

Read More »
Contacts

Socket Contacts mate with ARINC 600 plug connectors.

NSX Series Size 22 Socket Contacts combine stamped and rolled clip inside screw machined body, which uses 3 points of electrical contact. Clip members are plated with 50 Â-µin. of gold, with flash gold on contact body to eliminate tin-lead and achieve RoHS compatibility. Completely intermateable with existing ARINC 600 plug connectors, PC tail contacts are compatible with existing PCB...

Read More »
Spring Pin Connectors are offered in crimp and solder designs.
Electrical Connectors

Spring Pin Connectors are offered in crimp and solder designs.

Mill-Max 0962 spring pins feature compression spring connection on one end, wire termination on the other, .042 in. dia plunger, and are rated to one million cycles. Crimp-barrel tail accommodates stranded or solid copper wires up to 22 ga. Machined components are plated with 20 Â-µin. of gold over nickel and beryllium copper is plated with 10 µin. Mill-Max 0933, for soldering...

Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Sponsored

Vector® Sports Training Ball Offers Visible Point of Contact

Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.

Read More »

All Topics