Lightweight Twin Connector provides 100% tie-off for PFLs.
Fall Protectors

Lightweight Twin Connector provides 100% tie-off for PFLs.

Attached to harness webbing below back D-ring, Miller Twin Turbo™ G2 Connector provides continuous, 100% tie-off for Miller TurboLite™ and Miller Turbo T-BAK™ Personal Fall Limiters (PFLs). Webbing Retainer Clip has slot sized to accommodate thicker harness webbing designs, and design makes D-ring free for rescue or for connection to overhead self-retracting lifeline. Also, Webbing Retainer...

Read More »
Mounts

KB Racking's EkonoRack Receives ETL Certification from Intertek

LOS ANGELES -- KB Racking, a leading North American solar mounting systems company, just completed the certification process of its EkonoRack flat roof mounting system according to the UL-2703 industry standard, as tested and certified by Intertek. Intertek performed extensive system testing on all of the EkonoRack's components in order to classify it according to the UL industry standard. The...

Read More »
Hose

The Gates Corporation Releases New Aftermarket Parts

Gates expands its aftermarket coverage with SKU additions across its product line, adding 128 parts for maximum coverage on late model vehicles as well as the all-new PolarSeal® II Clamp Assortment and PolarSeal II Male Flareless Assemblies for A/C repair. DENVER, Colo. – The Gates Corporation, a global, diversified manufacturer of industrial, automotive and heavy-duty aftermarket...

Read More »
Coping

Concrete Wall and Pier Caps feature lightweight design.

Made from steel-reinforced cellular concrete with minimal use of sand and cement, wall and pier caps are designed to facilitate handling, reduce freight expense, as well as facilitate cutting and shaping. Pier caps typically top columns and pillars, while wall caps (wall coping) complete walls of brick, block, and cast concrete. Pier caps come in 7 ¾–40 ¼ in.² sizes and 55+...

Read More »
Miscellaneous Connectors

Clarkdietrich(TM) Building Systems Receives ICC Evaluation Services Certification for Its C-Sections and Tracks

West Chester, OhioÂ- – ClarkDietrich™ Building Systems has updated their code report for structural C-sections and tracks, ESR-1166P, to meet the IBC 2012 and IRC 2012 Building codes. In addition, the report contains supplements for the 2010 California Building Code and Florida Building Code. The report confirms that C-sections and tracks from ClarkDietrich Building Systems are code...

Read More »
Intelligent Machine Control Dozer has automatic blade control.
Bulldozers

Intelligent Machine Control Dozer has automatic blade control.

Able to perform finish grading as well as rough dozing, D61EXi/PXi-23 integrates KOMTRAX® (Komatsu Machine Tracking System) and TOPCON's construction management system. Operating weights range from 39,441–41,381 lb with 168Â- hp at 2,200 rpm. Longer track-on ground standard (EX) and low ground pressure (PX) models are available to offer flotation and weight distribution...

Read More »
Support Systems

Solar Foundation System features one-piece design.

Featuring patented finned foundation at one end of steel pipe and top plate at other end, MastFoundation™Ã‚- & Rapid Installation System eliminates connection between foundation and mast, minimizing installation time and amount of materials needed to fabricate system. Installation requires no concrete, excavation, dewatering, or waiting, making pre-engineered solution suitable for...

Read More »
Excavators

Excavator features 5 ft tail swing radius for maneuverability.

Model iT4 DX140LCR-3, 16-ton excavator has 5 ft tail swing radius resulting in tail swing overhang of 9 in. Suitable for congested jobsites, unit has 12 ft 4 in. overall track length allowing stability for digging and lifting operations. Electronic power optimizing system provides 4 work modes, auto-idle, and diagnostics, while Roll-Over Protective Structure cabin has adjustable air suspension...

Read More »
Safety Chain Lanyard helps operators align heavy tools.
Tool and Tool Board Hangers

Safety Chain Lanyard helps operators align heavy tools.

MILLHOG® ET-800 Dual Spring Hanger features 48 in. long safety chain, secured into milled slots on two 8 in. wide x 3/8 in. top and bottom steel plates. Chain is retained by welded covers and rated for 4,500 lb, while each of unit's drawbar springs is rated at 610 lb. Product is designed to limit travel of springs to 3.5 in. and prevent bottoming out, breakage, and personal injury while...

Read More »
Souriau: 20% of Cadmium Production Already Switched to RoHS Zinc Nickel Plating Line
Nickel

Souriau: 20% of Cadmium Production Already Switched to RoHS Zinc Nickel Plating Line

Last year, Souriau manufactured more than 50% of its 38999 connectors with a RoHS plating, further reinforcing the company's position as industry green leader in the connector market. The company has more than a decade of experience with RoHS Zinc Nickel plating, which is now considered a superior RoHS-compliant alternative to cadmium by the MilAero industry. Souriau has now industrialized this...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers