Poles

Telescoping Light Mast features 360° rotating capabilities.

Featuring removable mast head and fold over assembly for transportation purposes, Model LM-16 enables users to deploy lights, security cameras, and other equipment to elevations of 16 ft. Mast is elevated from folding position with 1,000 lb hand winchÂ- fitted with 3/16 in. cable and extended from 10–16 ft using second 1,000 lb winch. By loosening T-handle, operators can rotate mast...

Read More »
Laser Alignment Accessory features interchangeable collars.
Aligners

Laser Alignment Accessory features interchangeable collars.

Used for precisely measuring straightness ofÂ- tube or bore, Microgage Bore Receiver comes with interchangeable collars that can be manufactured in different shapes, configurations, and materials depending on contour or condition of bore tube. Product detects laser reference beam while moving through bore into which it was inserted, and Display unit clearly shows readings in each...

Read More »
Corded, 1 in. Rotary Hammers are suited for overhead drilling.
Electric Hammers

Corded, 1 in. Rotary Hammers are suited for overhead drilling.

To increase accuracy, model HR2611F, and model HR2621 feature Anti-Vibration Technology (AVT®) internal counterbalance system. Both models deliver 2.1 lb-ft impact energy and offer 3 selectable modes ofÂ- operation: rotation only, hammering with rotation, or chipping only. Other features include sequential impact timing, variable speed trigger, and 40 bit angle settings. While HR2621...

Read More »
OEM Piezo Driver integrates high voltage power supply.
Power Supplies

OEM Piezo Driver integrates high voltage power supply.

Designed for dynamic operation of low-voltage multilayer piezo actuators and piezo positioning systems, Model E-836.03 can source and sink peak currents to 100 mA and provides output voltage range of -30 to 130 V. Running on 24 V, module also integrates high-voltage supply for piezo driver as well as other required supply voltages. PCB-mountable unit is short-circuit-proof and equipped with full...

Read More »
Improving Productivity Through Metrology
Inspection Services

Improving Productivity Through Metrology

Recently, BC Engineering and Design performed a detailed alignment of a custom induction Heat Treat Machine (IHTM). The manufacturing facility was experiencing inconsistent surface heat treat results with their precision machined parts. Initial measurements showed that the machine was not level or parallel. The frame of the machine was out of alignment by greater than 1/2 . The desired...

Read More »
Hannover Messe 2014: ContiTech Material Highlights on Show
Rubber

Hannover Messe 2014: ContiTech Material Highlights on Show

With its technologies, products, and systems, the ContiTech Group makes a lasting contribution to technological progress, supplying solutions to meet the needs of its customers and indeed the wider world. Spotlight on material and process expertise Comprehensive customer care with numerous service products Excellent customer relationships in Messe partner country the Netherlands High-performance...

Read More »
Hemostasis Valve features sideport tubing and stopcock.
Valves

Hemostasis Valve features sideport tubing and stopcock.

Hemostasis valves with sideport tubing connection toÂ- stopcock feature closed seal, which eliminates need for manual rotation, for 0–0.118 in. dia items. While Part #11485 has 3-way stopcock with white handle and 2 female luer lock connections, part #11486 features 1-way stopcock with blue handle and one female luer lock. Both...

Read More »
Crawler Dozers offer fully automatic blade control.
Bulldozers

Crawler Dozers offer fully automatic blade control.

Meeting EPA Tier 4 Interim regulations using smart engine technology, Models D37EXi/PXi-23 and D39EXi/PXi-23 can perform finish grading as well as rough dozing.Â- At 2,200 rpm, dozers push with net 89 hp and 105 hp, respectively. Machines include factory-installed cab top GNSS antenna, optimized inertial measuring unit, and stroke sensing hydraulic cylinders. Komatsu Diesel Oxidation...

Read More »
Lights

Mini LED Light Pole features pneumatic operation.

With Model PLM-13.5-NAC-2XLEDP3W-3-1227, dual light heads can be elevated to max height of 13.5 ft. Aluminum mounting plate on top of pneumatic mast holds two LEDP3W-3 lights that produce total of 1,368 lm while drawing 18 W. Each light bar contains 3 CREE XLamp XR-E 3 W LEDs that produce 228 lm. They are paired with high-purity optics to produce tightly focused 10° spot beam approximately...

Read More »
Flange Alignment Tools combine safety, speed, efficiency.
Aligners

Flange Alignment Tools combine safety, speed, efficiency.

ATM-Series helps reduce set-up time and installation expense where rotational misalignments and twists in pipeline are common problems. Designed for single-operator use, ATM-2/-4/-9 Series do not require external power source, chains, slings, or lifting gear. Design allows use in any position and accommodates ANSI, API, BS, and DIN flanges. Max lifting force is 10 and 40 kN, respectively, for...

Read More »
Gorbel Introduces New Mobile Fall Protection Unit
Sponsored

Gorbel Introduces New Mobile Fall Protection Unit

Providing adequate fall protection is always a critical consideration and one that in many cases can be difficult to ensure. The new Mobile Fall Protection Unit is designed to facilitate positive fall protection in applications that would typically be difficult or impossible to provide with standard methods. To learn all about the advantages and convenience, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers