Heat-Shrinkable Shapes support smaller connectors.

Miniature heat-shrinkable molded shapes fit circular connectors and provide effective protection and strain relief. Available in choice of materials, with optional adhesive lining for environmental sealing, molded parts have operating temperature range from -55 to 200 deg C and are installed by heat-shrinking over leads and connectors to apply strain relief to wires down to 2.1 mm dia....

Read More »
Connector System suits wire harness assemblies.
Connectors

Connector System suits wire harness assemblies.

Model 4.2 Power Economy (PE) series connector system is suited for wire to wire applications that require 4.2 x 4.2 mm centerline spacing. Plastic connector mates and unmates while maintaining positive-latch design. Unit is available in 2 to 24 positions and accommodates receptacle housing with either panel mount or free hanging plug housing. Connector mates with AMP-DUAC connectors and other...

Read More »
IC Pin Straightener causes no static.
Straighteners

IC Pin Straightener causes no static.

DIP-R-SIZER(R) provides static protection while straightening pins on 0.300 or 0.600 in. center DIP ICs. Tool eliminates need for anti-static devices or complex pin straightening equipment. In use, device to be straightened is placed inside tool and squeeze brings leads into tolerance of 0.320 or 0.620 in.

Read More »
Lead Assemblies handle high voltages.
Connectors

Lead Assemblies handle high voltages.

Hi/Mate 12 gauge contact lead assemblies for MIL-C-38999 Series I, III, and IV connectors withstand up to 13.5 kVdc, commonly found in densely packaged, high-voltage power supplies, CRTs, and TWTs. Assemblies are terminated with Hi Voltage FEP cables. Insertion and removal procedures use same tools as standard 38999 connector. Lead assemblies are electrically isolated from connector shell and can...

Read More »
Industrial Ethernet Connectors meet IP67 watertight rating.
Interfaces

Industrial Ethernet Connectors meet IP67 watertight rating.

Variosub RJ-45 connectors are suitable for fast Ethernet transmissions at 100 Mbps in accordance with Class D or Category 5 of EN 50173. Protects against dirt and moisture, withstands adverse conditions associated with use on machinery and industrial installations, and protects RJ-45 contact insert. Connector is protected against forces pulling mounting and hood sides apart, pulling cables out of...

Read More »
Power Straighteners suit metal stamping applications.
Straighteners

Power Straighteners suit metal stamping applications.

Series 250 provides speed, torque, and straightening capacity needed for light gauge coil metal-stamping. Machines are typically matched with ServoMaster Series 1 and 2 servo roll feeds and 2,500 to 20,000 lb capacity coil reels. They feature oversize Crodon coated pinch rolls, 7 independent straightening rolls, cluster-gear drive drivetrain, and AC-variable speed-drive technology.

Read More »
Pin and Sleeve Connectors carry CE mark.
Connectors

Pin and Sleeve Connectors carry CE mark.

EPIC(R) Pin and Sleeve Connectors conform to IEC 309-2, and are available in North American and International configurations. North American devices are available in 20, 30, 60, and 100 A, while international devices are available in 16, 32, 63, and 125 A. Both versions are available in splash proof (IP44) and watertight (IP67) models. All North American products are UL (UL1682 and UL1686) and...

Read More »
Interface connects to any PLC.
Signals

Interface connects to any PLC.

QuickBloc Universal PLC interface has 8 or 16 channels, connects to any manufacturer's PLC, and has choice of screw or tension clamp technology. It comes with terminals, pre-wired cable with flying leads ready to attach to any PLC's front panel adapter, and pre-printed marking tags. Options are available for fusing, analog signals, and PCB versions that use pluggable cable system.

Read More »
Cutters and Inserts provide less than 0.0004 in. axial runout.
Other Milling Cutters

Cutters and Inserts provide less than 0.0004 in. axial runout.

Fix-Perfect finishing cutters and inserts are for cast iron milling. Radial negative, axial positive rake angle makes chipload of 0.020 in./tooth possible. Inserts have 4 cutting edges and are offered in 2 grades. K110M is uncoated K10 class grade designed for machining speeds of 500 to 1000 sfm. KC520M is K15 class TiAIN coated grade designed for machining speeds from 600 to 1250 sfm. Cutters...

Read More »
Tote Bags come in camouflage colors.
Tool Boxes, Chests and Cabinets

Tote Bags come in camouflage colors.

Camouflage Totes are constructed of rugged, tear-resistant nylon polyester imprinted with leafy camouflage pattern. Totes have zipper closures to prevent tool loss, reinforced bottoms for durability, and removable shoulder straps. Nylon-stitched and rivet reinforced for durability, totes are available in all popular sizes and shapes. BucketBag(TM) Tool Carrier, which fit over rim of standard...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics