Skid Steer Hammer Attachments offer more power with less weight.

Skid Steer Hammer Attachments offer more power with less weight.

Breakers range in weight from 430-1,100 lb. Smallest model has tool energy rating of 70.11 lb-ft/blow, while largest breaker has rating of 468.63 lb-ft/blow. Valve system uses less oil flow to do same job as higher flow breakers. Air check valve system allows units to be submerged in water while working. Shorter size increases operator visibility in small tight areas.

Read More »
Suction Diffusers increase flow-straightening capabilities.

Suction Diffusers increase flow-straightening capabilities.

Available with 1, 3, or 5 pipe diameters of flow straightening, products reduce turbulence and protect against particles. Units incorporate strainer, elbow, and pipe-reducer functionality along with quick-release cover and 1/8 in., stainless steel, perforated screen with 20-mesh liner. Diffusers are offered in cast iron, configured to replace 90° elbow, as well as in fabricated carbon steel or...

Read More »
Crawler Dozers feature hydrostatic steering system.

Crawler Dozers feature hydrostatic steering system.

Models D65EX/PXIWX-15 and D85EXIPX-15 are mid-sized crawler dozers equipped with Tier II compliant SA6125E-3 engine. D65 operates with 190 hp at 1,950 rpm, while D85 pushes with 240 hp at 9,000 rpm. Blade capacities range from 4.8-7.34 yd3 for D65 and 6.8-9.2 yd3 for D85. Powered by independent hydraulic pump with engine power transmitted to both tracks, outside track is allowed to move faster...

Read More »
Repair Component evaluates/repairs ASME pressure vessels.

Repair Component evaluates/repairs ASME pressure vessels.

PMCap provides code-compliant, non-intrusive, permanent repair of pressure boundaries. Metal Loss Evaluation Assessment (MLEA) charts, generated by Fitness for Service software program, provides for immediate field assessment of vessel to determine ASME Code compliance. Supplied as Code material or certified PART for vessel alteration, customized repair component is welded to outside surface...

Read More »
Earthmovers offer max capacity of 18 cubic yards.

Earthmovers offer max capacity of 18 cubic yards.

Series 18D provides 2-valve sequence operation and CAT cutting bits. Four 20.5 x 25 tires offer maximum flotation. Heavy duty cylinders have 3 in. rams and -¾ in., 4000 psi pressure hoses. Design provides rapid, clean swingfloor ejection system. MD yoke quickhitch is standard; HD 360° swivel quickhitch is optional. Transport width is under 12 ft.

Read More »
Spring Belts provide reliable tension in hostile environments.

Spring Belts provide reliable tension in hostile environments.

Jacketed Spring Belts(TM) offer variety of flexible jacketing options including Cyclothane-A urethane, Viton, PVC, Hypalon®, and nitrile. Jackets made with Cyclothane-E urethane operate from -25 to 250°F, while silicone jackets work from -70 to 450°F. Steel spring round belts range in size from 1/8 to 3/4 in. and can be used on pulley diameters as small as 3/4 in. Connectable Quick-Fix form...

Read More »

Nailers address regional demands.

Model FC350A uses 30-34° paper collated, clipped head framing nails to meet needs of Midwest framers, while Model FM350A uses 28° wire collated, clipped head framing nails with Northeast framers in mind. Model FR350A addresses demands of Southeast, Gulf Coast, and Western framers with 22° plastic collated, round head framing nails. All use 2-3 -½ in. long nails and feature rounded body style...

Read More »

Pneumatic Nailer utilizes high pressure technology.

High Pressure Framing Nailer Kit, Model CLFCP350, includes nailer, 175 psi side stack compressor with console, 50 ft air hose, 3/8 in. fittings, and pipe joint tape. Nailer uses 32° 2-3-½ in. paper collated, clipped head framing nails. Tool-free magazine release allows easy clearing of jams, while selective trigger allows user to switch between restrictive or contact mode. Nailer also includes...

Read More »
Inserts/Grades provide multi-directional turning.

Inserts/Grades provide multi-directional turning.

MDT(TM) Threading Inserts, available in CP500 grade, feature 55° whitworth threads, and partial profiles of 60° for UN and ISO threads. They can produce right- and left-handed threads both toward and away from chuck. Grooving inserts include CP500 grade, and in 13 mm style, are suited for small bore and face machining. Grade TK150 works with cast irons and hardened steel. MDT system uses single...

Read More »
Acoustical Panels serve double function.

Acoustical Panels serve double function.

Panels function simultaneously as self-supporting roof deck and acoustical ceiling. Crimp-curving method can custom curve perforated steel B deck or N deck panels in 22 to 18 ga and depths of 1-½-3 in. without fracturing panel surface or altering acoustical performance. Process creates subtle crimp that is aesthetically pleasing with perforations that cannot be seen from below. Nestable B deck...

Read More »
Neagle Choice, LLC Announces New Available Services
Sponsored

Neagle Choice, LLC Announces New Available Services

Neagle Choice has long been known as a quality source for commercial sewing, printing, die cutting, and the manufacturing of a wide range of custom products. Enhancing our service capabilities has been the key to our success, and has driven our growth into many new and exciting markets. Continuing on this trajectory, we now offer precision laser cutting and etching, adding to our long line of manufacturing services. See our video to learn all about it.

Read More »

All Topics