Digital Microgage simplifies factory alignment.

Laser Microgage 2000 checks mechanical straightness, slide and stage runout, surface flatness, machine parallelism, and mechanical squareness. It works with laser transmitter, which projects collimated laser reference beam that is captured by receiver connected to digital display. MG-2000 operates over range of a few inches to 80 ft and provides readings accurate to 0.0001 in. It can connect to...

Read More »

Lifting Column provides height adjustability to 16 in.

Powered by one 24 Vdc electric linear actuator drive, Boston Lifting Column offers safe low voltage up/down controls and can lift up to 1,000 lb. Product lifts instrumentation, machinery, and small work surfaces up to 16 in. off of surface with speeds to 0.78 ips. Unit is available as stand-alone column or assembled with base plate and feet. Optional work surfaces are available.

Read More »
Heavy Duty Lifters are powered by 63 mm ISO/VDMA cylinder.

Heavy Duty Lifters are powered by 63 mm ISO/VDMA cylinder.

Series PHL Heavy Lifters are offered in stroke lengths of 50, 80, 100, 125, 160, and 200 mm. Cylinder has adjustable cushions, which reduce shock to unit, and magnetic piston for switches to provide end of stroke signal to controllers. Built-in rod compliance eliminates side load on cylinder piston. Composite bearings are internally lubricated. Able to handle off-center loads, lifters are suited...

Read More »
Connector streamlines steam-in-place processes.

Connector streamlines steam-in-place processes.

Designed for biopharmaceutical applications, Steam-Thru(TM) Connection (STC) serves dual function of valve and connection. Product enables biopharmaceutical companies to sterilize flow path and initiate connections between bioreactor and media bag without adding plumbing connections. Unit utilizes steam trap to rid connection of steam during sterilization process and reduces validation concerns...

Read More »
Wheeled Dozer offers compaction and maneuverability.

Wheeled Dozer offers compaction and maneuverability.

Rubber-tired Model WD600-3 pushes with 485 flywheel hp at 2,000 rpm and offers maximum rim-pull up to 94,300 lb. It features Tier 2 compliant SAA6D170E-3 engine and fully automatic shift transmission. Fully hydraulic, wet-disc braking system is completely sealed to lock out contaminants. A 10 cu yd straight blade is standard. Dozer is suited for mining, coal stockpile, woodchip, and general...

Read More »
Crawler Dozers feature hydrostatic steering system.

Crawler Dozers feature hydrostatic steering system.

Models D65EX/PXIWX-15 and D85EXIPX-15 are mid-sized crawler dozers equipped with Tier II compliant SA6125E-3 engine. D65 operates with 190 hp at 1,950 rpm, while D85 pushes with 240 hp at 9,000 rpm. Blade capacities range from 4.8-7.34 yd-³ for D65 and 6.8-9.2 yd-³ for D85. Powered by independent hydraulic pump with engine power transmitted to both tracks, outside track is allowed to move...

Read More »

Laser Alignment System improves manufacturing efficiency.

Dual-Axis Microgage 2D can measure horizontally and vertically at same time. It provides straightness, flatness, parallelism, and squareness measurements to 0.001 in. over distances of 50 ft. System will monitor mechanical misalignment and runout, align rails and slides, position machinery sub-assemblies, and align bores and drive shaft mechanisms. It can be attached to PC or laptop for...

Read More »
Tap Aligning Center simplifies hand tapping.

Tap Aligning Center simplifies hand tapping.

Equipped with No. 2 Morse taper, Tap Aligning Center has spring center used to align taps when hand tapping in lathes or drilling machines. Suited for awkward tapping operations, product does not require user to constantly adjust center. Physical characteristics include hardened 5/16 in. dia center, 1 in. plunger travel, and overall length of approximately 5-½ in.

Read More »
Snow Plow Control Holder offers simple installation.

Snow Plow Control Holder offers simple installation.

Control Holder provides means of adding controls to vehicles without drilling directly into truck console. It installs by fitting directly over seats of vehicle, and installation or removal of device takes approximately 30 seconds. Control holder will fit virtually all trucks with typical seats, although some truck models may require removal of cup holder.

Read More »
Ceiling Panels suit interior open plan spaces.

Ceiling Panels suit interior open plan spaces.

Combining monolithic appearance with sound absorption (nrc 0.70) and light reflectance (87%), fire-resistant EuroFoam(TM) panels are made from melamine. Recyclable, mold- and mildew-resistant, inorganic product is free of off-gassing and does not shed fibers into air. Panels are compatible with 9/16 and 15/16 in. grids and are available in standard 24 x 24 in. and 24 x 48 in. module sizes and...

Read More »

All Topics