Rotary Hammer offers efficient dust collection capability.
Suited for continuous operation, 1 in. HR2432 has built-in dust collection system that consists of bag, fan, and in-line dust collection hose with elbow-shaped nozzle. Unit weighs 6.6 lb, is rated 6.7 A, and provides 1.6 ft-lb impact energy. With no-load speed of 0-1,000 rpm, hammer delivers 0-4,500 bpm and features 3-mode operation switch. Optimum chisel positioning is accomplished with 360-Read More »
Rotary Hammer provides 3 modes of operation.
Equipped with 7.0 A motor, 15/16 in. SDS Plus Rotary Hammer, Model DH24PF3 produces 2.5 lb-ft impact energy, no-load speed of 0?1,150 rpm, and impact rate of 0?4,600 ipm. Three modes of operation include drilling only, hammering only, and hammer drilling, controlled by mode selector dial located under body. When using cold chisel or spade bit, variable lock mechanism, available in hammer mode...Read More »
Rotary Hammer performs hammer drilling and chiseling.
Equipped with 9.6 A motor, Spline Drive KHE 54 offers no-load speed of 135-275 rpm and 1,300-2,600 bpm. Vario-Tacho-Constamatic electronic speed control enables tool to maintain constant speed between load and no-load. Overload clutch limits maximum amount of torque applied if tool blocks during operation. Hammer offers rotational torque of 531 lb-in. and drilling range of -½-1-½ in. with max...Read More »
Tamper-Evident Container offers watertight reclosure.
Featuring gasketless, tamper-evident tear tab lid, 1DC dual-closure Smart Seal-® container is available in 1 gal, rigid plastic package with ergonomic handle. Tapered configuration allows nesting of empty containers for efficient shipping, and container can be opened and closed without tools. Containers, lids, and handles are available in 12 standard colors, as well as custom colors, and options...Read More »
How to Reduce Costs for Plastic Caps, Closures and Other Packaging Products
Check out this white paper to read about the six questions to consider before selecting an injection molder for your packaging application.Read More »
Rotary Hammer delivers 2.2 lb-ft at 0-5,800 bpm.
Offered in D-handle and Pistol-Grip versions, 1 in. SDS-plus-® Bulldog Xtreme(TM) Models 11255VSR and 11253VSR operate from 0-1,300 rpm using 7.2 A motor. Drilling range in concrete is 3/16-5/8 in. with solid bit capacity of 1 in. and thin wall core capacity of 2 5/8 in. Piston, striker, and impact bolt and guide tube are dialed in with tight tolerances to remain concentric. Rotating brush plate...Read More »
Press Feed System suits heavy-duty applications.
Space-Saver(TM) Electronic Servo Press Feed System incorporates piloting design into integral pull-thru straightener. Suited for lines that may be used to straighten or feed materials of 0.035 in. thickness or greater, Toggle Link Motion Straightener configuration ensures all upper rolls of mechanism are raised to equal height. This releases tension between upper and lower rollers of straightener...Read More »
Modular Hoist can be configured to customer requirements.
Offering fully modular vertical transport solution, Scando 650 is available in single- or twin-car configurations, with 2-motor DOL, 2-motor FC, or 3-motor FC. Units offer payloads of 1,500-3,200 kg/car, speeds up to 65 m/min, and maximum lifting height of 400 m. Various types of doors and gates are available.Read More »
Rotary Hammer features vibration absorbing grip.
Featuring 5.9 A motor with 620 W input power, 7/8 in. Model DH22PB cuts concrete, mortar, and tile. It offers drilling only or hammer drilling modes, lock-on speed button for continuous operation, and electronic variable speed control of 0-1,150 (0-640 reverse) rpm and 0-4,400 ipm impact rate. DH22PB weighs 5.1 lb, is 13.81 in. long, and features mode selector dial, lock-on speed button, and 360-Read More »
Timing Belts and Pulleys minimize noise and vibration.
Constructed of abrasion-resistant polyurethane and steel or stainless steel tension members, ARC-POWER PLUS belts are available as open-ended, spliced and welded endless, and truly endless. They provide 100% tracking in both running directions without flanges. Based on overlapping tooth arrangement, smooth interaction with idler and tensioners running on toothed side of timing belt eliminates...Read More »
Waste Handler Crawler suits tough landfill work.
Featuring hydrostatic drive train, Series 850J is powered by 185 hp PowerTech(TM) 6081 engine and comes with 2 blade configurations. Model 850J WT features outside-mount, 15 yd-³ semi-U blade with trash rack, while Model 850J WLT offers inside-mount, 5.57 yd-³ Power Angle Tilt blade. All have front and rear track guides and sprocket guard along with Dura-Trax(TM) undercarriage with...Read More »
Tekna Manufacturing LLC Announces NFPA 99 Compliant Model 7200 Multiplace Chamber
Tekna is a leader in Monoplace and Multiplace Hyperbaric Chambers for Hyperbaric Oxygen Therapy (HBOT), offering products that set the standard for quality and innovation. Our new 7200 series of multiplace chambers is a state-of-the-art system that integrates advanced engineering with a plethora of features and options making it the industry's premier HBOT system. To learn more, see our video.Read More »