Wire Bonding Islands offer alternative to long wire bonding.
Connectors

Wire Bonding Islands offer alternative to long wire bonding.

Gold-plated, Wire Bonding Islands can be mounted between 2 components being wired together using shorter wire leads, reducing overall parasitics in circuit. Units feature option of using tab for connection to circuit with standard thickness of 0.015 in. Made from alumina substrate, devices feature wire-bondable gold conductor, silver ground plane, and gold-plated, beryllium copper tab contact.

Read More »
Crawler Dozers feature hydrostatic steering system.
Bulldozers

Crawler Dozers feature hydrostatic steering system.

Mid-Size Models D61 EX-15 and D61 PX-15 are standard- and low ground-pressure dozers, respectively, outfitted with Tier II compliant SA6D1 14E-2 engine. They push with 155 hp at 1,850 rpm and range in operating weight from 35,080-41,010 lb. Hydrostatic Steering System eliminates steering clutch and offers agile movement when dozing. Power angle tilt blade offers capacity of 4.4 ydÂ-³ for D61...

Read More »
Nitrogen Gas Lifter suits progressive stamping dies.
Lifters

Nitrogen Gas Lifter suits progressive stamping dies.

Compact Model SLN.090 Micro Nitrogen Gas Lifter has double-keyed guide rod, preventing rotation and eliminating need for additional guidance components. Micro 90(TM) gas spring, housed inside guide rod, provides reliable lifting force and facilitates repair. Forces on contact range from 40-200 lb and may be adjusted to meet individual requirements. Stroke lengths vary from 25-125 mm.

Read More »
Wall and Ceiling Panels

Shaft Liner features gold-colored mat surface.

DensGlass® Ultra Shaftliner(TM) consists of moisture-resistant, noncombustible 1 in. gypsum core with coated glass mat face and back. It resists growth of mold that can occur from exposure to wet weather during construction. Suited for vertical and horizontal shaft wall assemblies, as well as stairwell and area separation wall applications, product achieves 2 hr fire endurance rating in...

Read More »
Rotary Hammer produces 0-4,600 blows per minute.
Electric Hammers

Rotary Hammer produces 0-4,600 blows per minute.

D-handle Rotary Hammer, Model BHE-D24 incorporates Variospeed electronic speed control, reverse feature for drilling, and die cast aluminum gearbox that allows rapid heat dissipation. Winding protection grid deflects airborne debris away from armature winding. Large knob lets operator change from percussion with rotation drilling to rotation only. With 5.6 A motor, drilling capacity is up to 1...

Read More »
Custom Polyethylene Bags feature Velcro® brand closures.
Bags

Custom Polyethylene Bags feature Velcro® brand closures.

Using Velcro® brand closures, Janstrip(TM) Polybags open and close without exact alignment, attach in wet or frozen conditions, do not trap air or moisture, and lay flat. Bags are made from 2-4 mil thick polyethylene in sizes from 4-15 in.Â-². They can be hole punched, supplied with doorknob hangers or handles, gusseted, and wicketed. Available with up to 6-color custom printing,...

Read More »
Oil Skimming Belt has textured surface to facilitate clean-up.
Controls and Controllers

Oil Skimming Belt has textured surface to facilitate clean-up.

Incorporating embedded metal filaments in belt to protect against static electricity build-up, Light Fuel Oil (LFO) Polymer Fuzzy Belt withstands exposure to harsh chemicals and solvents. Surface design, with thousands of fibers per square inch protruding from belt, increases effective surface area for gasoline and non-viscous oil removal. This results in removal rates for fuel oil in gallons per...

Read More »
Compactors process ferrous and non-ferrous metals.
Compactors

Compactors process ferrous and non-ferrous metals.

Chipmunk Model 6000 is a 20 hp system with output of 500 lb/hr aluminum and 1,400 lb/hr steel and ductile iron. Ten hp, Model 2000 outputs 260 lb/hr aluminum and up to 600 lb/hr steel and ductile iron. Utilizing mechanical kinetic energy driven design, both deliver 8:1 compaction ratio, transforming metalworking chips into dense and dry briquettes. Machines include discharge chute and straight...

Read More »
Metal Grid anchors cement or refractory linings.
Grates and Gratings

Metal Grid anchors cement or refractory linings.

Metal Hex Grid provides surface framework to anchor and reinforce cement or refractory linings in reactor vessels, furnaces, ducts cyclones, and flue gas lines. Hexagonal grating rolls to accommodate vessel contours and simplify lining application. Serving as reinforcement during and after lining material application, product is made of 304 SS, with other materials available upon request.

Read More »
Medical Puller helps hospital workers position beds.
Positioners

Medical Puller helps hospital workers position beds.

Measuring only 13 in. high, battery-driven ERGOtug MÂ-² slides under one end of bed, while automatic hitch slightly lifts 2 of bed's wheels off ground. Operator can reposition bed using controls on handle to turn, stop, back up, or go forward. ERGOtug M² can remain attached to bed frames during transport in elevators. It offers load capacity up to 1,800 lb and maximum speed of 4.5...

Read More »

All Topics