Hammers

Pavement Breaker is designed for minimal vibration.

Electric concrete breaker, D25980K, employs metal, automotive-style seals on ram and piston to prevent dust and debris from entering unit and extend product life. Hammer mechanism delivers 61 lb-ft of impact energy, and SHOCKS - Active Vibration Control combines shock-mounted, rubber-coated handles with counter balance mechanism located in tool's barrel to reduce vibration to 6.6 m/secÂ-²....

Read More »
Rotary Hammers include anti-vibration system.
Electric Hammers

Rotary Hammers include anti-vibration system.

Delivering 2.0 lb-ft of impact energy and up to 5,980 blows/min, 1 in. Compact SDS Rotary Hammer features 7.0 A motor, rotating brush plate to provide equal power in forward and reverse, and all-metal magnesium gear case. Equipped with 7.5 A motor, 1 in. D-Handle Rotary Hammer delivers 2.4 lb-ft of impact energy at 5,900 blows/min. It has 1 in. solid bit drilling capacity in concrete and optimal...

Read More »
Miscellaneous Processors

WIN Enterprises Announces SOM ETX Module with AMD Geode LX800 Processor

Companion ETX Evaluation Base Board Enables Rapid Development NORTH ANDOVER, MA, November 15, 2006: WIN Enterprises, Inc., a leading designer and manufacturer of embedded controllers and platforms for OEMs, announces the MB-07302, an ETX system on module (SOM) featuring the AMD® Geode(TM) LX800 processor. The SOM-ETX module (95 mm x 144 mm) attaches to a larger standardized carrier board to...

Read More »
Lightweight Impact Hammer delivers up to 2,200 bpm.
Electric Hammers

Lightweight Impact Hammer delivers up to 2,200 bpm.

Weighing 6.2 lb, IQv(TM) Series Model W360 Â-½ in. square drive cordless Impactool(TM) features variable speed trigger and electrical brake for optimal control of fastening and loosening. Unit delivers 360 lb-ft reverse torque. Along with all-metal hammer case, product features metal-supported, composite housing that withstands exposure to fluids and chemicals in harsh environments. Tool...

Read More »
Cordless Impactool incorporates quick-change hex.
Electric Hammers

Cordless Impactool incorporates quick-change hex.

Weighing 2.7 lb, IQv(TM) Series Model W040 Â-¼ in. quick-change Impactool(TM) features variable speed trigger and electrical brake for optimal torque control. It delivers 40 lb-ft max torque, preventing users from stripping bolts and damaging nuts. Along with all-metal hammer case, product features metal-supported, composite housing that withstands exposure to fluids and chemicals in harsh...

Read More »
Berner's In-Ceiling Mount Air Curtain Now with Trim Kit
Air Curtains

Berner's In-Ceiling Mount Air Curtain Now with Trim Kit

New Castle, PA - November 1, 2006 - The In-Ceiling Mount air curtain provides environmental separation and insect control, with a look that is aesthetically pleasing and all internal components hidden in the ceiling. Berner International is the only U.S. manufacturer of this unique design, (patent pending). In addition, the In-Ceiling Mount now comes with a custom trim kit to match the white...

Read More »
Valve Components

Solenoid Valve Connectors are available with metric threads.

Offered in 3 types/sizes, A and B solenoid valve connectors include M16 x 1.5 threads, while M12 x 1.5 threads are used on type C connectors. Available with 2 or 3 contacts plus ground, connectors support cable having 4-10 mm outer dia. Field attachable solenoid connectors are sealed to IP65, and come in black or white high/low profile housings.

Read More »
Master Lift Co. Introduces Grab Master
Tongs

Master Lift Co. Introduces Grab Master

Master Lift Co. introduces a larger capacity lifting device to compliment their current line of light duty "Grab Master" lifting tongs. The new model 1-X and 2-X tong will lift twice as much as other "Grab Master" tongs in production. With safe lifting capacity now at 6000 pounds and easily adjustable from 20 inches up to 48 inches wide. This tool is designed for use with an overhead crane. As...

Read More »
Blind Threaded Inserts suit high-load attachment jobs.
Inserts

Blind Threaded Inserts suit high-load attachment jobs.

Heavy-duty Atlas® MaxTite® inserts provide permanent metal threads in blind attachment applications where only one side of workpiece is accessible for fastener installation and final component assembly. During fastener installation, several thin sheets of dissimilar materials can be assembled and then final components can be attached. Available types include flathead and countersunk,...

Read More »
Electric Hammers

Cordless Rotary Hammers allow access in tight areas.

Models DC212KA, DC223KA, and DC233KL are 18, 24, and 36 V rotary hammers, respectively, built with SHOCKS(TM) - Active Vibration Control System to promote comfortable drilling experience. While DC212KA offers dual mode (hammerdrill/drill) operation, other models add chipping function. All models have anti-slip grip and 10Â-½ in. long, L-Shaped design. They deliver 4,100-4,400 bpm, offer...

Read More »

All Topics