New Connectors Products

Adapter Kit bridges type N devices to 7-16 DIN interfaces.

Suited for use on test-bench and in field, RFA-4013 contains 6 adapters made of machined brass with TeflonÃ-® insulation and silver-plated contacts and bodies for minimal intermodulation generation. Connectors include 7-16 DIN Male to 7-16 DIN Female R/A; 7-16 DIN Female to 7-16 DIN Female barrel; 7-16 DIN Male to N Male; 7-16 DIN Male to N Female; 7-16 DIN Female to N Male; and 7-16 DIN...

Integrated Circuit provides USB connectivity.

Measuring 2 x 1.6 in., USBwiz IC provides connection to SD media cards, USB thumb drives, or USB hard drives. It allows devices to talk to other USB devices such as printers, mice, keyboards, and joysticks. File-system chip includes FAT file system handling and, through commands over UART, SPI, or I2C, allows users to read/write files from thumb drive or SD/MMC card. UART runs as high as 921.6...

Power Connectors withstand extreme environmental conditions.

Made of high copper content alloys, Mechanical Grounding/Power Connectors are suited for direct burial applications in earth or embedment in concrete. Units feature nut and bolt design to provide means for connecting copper cable to various applications.

EMT Connectors suit fire alarm applications.

Steel-Red Color EMT Connectors and Couplings eliminate need to paint or otherwise color fittings. Units match EMT raceways for clean looking installations. Color does not affect grounding capability as required by NEC and UL.

Epoxy Crusher Backing Solutions for Construction Aggregate & Ore Mining Applications

This white paper provides a guide to epoxy crusher backing solutions for construction aggregates and ore mining applications.

Mezzanine Connectors feature dual beam receptacle contact.

Available in stack heights from 12.5-30 mm, AirMax VSÃ-® Connectors accommodate clearance requirements of most board-mounted components. Connections are accomplished using press-fit vertical headers with system's vertical receptacles. Connectors use edge-coupling technology and air dielectric between adjacent conductors for high signal density with low crosstalk. They can be scaled by varying...

Connectors provide high current in small molded body.

Available in 5, 6, 7, and 8-pin models, M16 x 0.75 versafast cordsets and receptacles are offered with PVC flexlifeÃ-® cable to withstand rigorous industrial applications. All connectors provide IEC IP67 protection, and are rated for 125 Vac/Vdc with 8 A for 5-pin and 7 A for 6- through 8-pin units. Products are suited for food and beverage, pharmaceutical, and material handling industries,...

Power Connector is rated for 300 A continuous service.

Designed as interconnection between 2 perpendicular power bus bars, Power Clip is suited for N+1 rectifier, power supply, and switching power supply applications. Because clip accepts solid .125 in. thick nickel or gold-plated rectangular bus bar tab, there is no need for mating connector. Product is UL approved for true hot plug current interruption of 100 A at 48 V and 200 A at 42 V using gold...

SC Module provides fiber optic capability.

Compatible with HanÃ-® 3A hoods and housings, SC-Module brings fiber optic capability to small form factor connectors. Module can be fitted with up to 4 SC fiber optic contacts and allows use of multi-mode or single-mode fibers. Using SC contacts in HanÃ-® 3A hoods and housings provides solution when fibers are to be connected in harsh industrial environment.

M8 Connectors target automation applications.

Offered in 3- and 4-pin female and 4-pin male versions, M8 Connectors can be used to build flexible I/O connection on circuit boards. When connectors are plugged in, protection rating meets IP67 in accordance with IEC 61076-2-101 standard. Insulator is high-temperature-resistant plastic and suitable for soldering with all SMT soldering procedures. Users can choose SMT, press-fit, or through-hole...

Adapters allow SOIC interchange.

Correct-A-Chip(TM) Adapters permit use of SOIC D package, 150 mil body chips to be used on boards designed for SOIC DW package, 300 mil body chips and vice-versa. Constructed of .062 in. FR-4 board manufactured to IPC-600E Class 2 standards, units are available in pin counts from 8-24 pins. Glass-filled FR-4 material is UL94V-0 rated with 1 oz of copper traces. Male pins are brass with 200...

Clear Clogged Drains Faster with General Pipe Cleaners' Kinetic Water Ram

The Kinetic Water Ram by General Pipe Cleaners clears out clogged pipes quickly using kinetic energy. The Ram is so simple to operate, anyone can use it. Check out the video to learn more.