Convenience Outlet accommodates high current.
Electrical Connectors

Convenience Outlet accommodates high current.

20A Convenience Outlet is designed for panel-mount applications and has quick snap-in configuration that offers insulation displacement connections. It will accept 20A and 15A plugs and is suitable for use in surge protectors, power outlets, and computer peripheral applications. Current capacity is up to 20A with 12 AWG solid wire at 125 Vac, 60 Hz. With 14 AWG solid wire, current capacity is up...

Read More »
Encoders are available with connectors.
Encoders

Encoders are available with connectors.

Accu-Coder(TM) Cube Series and model 702, 725, 758, and 225 encoders are available with Eurofast connector. Connector allows user to reduce stocking requirements for cord sets and similar components since cords can be used for encoder connections and other components of motion control systems (such as proximity sensors and photoelectric switches).

Read More »
Programming Port provides access in hazardous areas.
Electrical Connectors

Programming Port provides access in hazardous areas.

Graceport M7 Series Div 1 hazardous location interface eliminates need to remove all bolts from NEMA 7-9 enclosure to gain programming access to devices inside. Instead, interface is installed with conduit connection to nearby NEMA 7-9 enclosure containing programmable device. Personnel obtain hot work permit and perform sniff test before programming.

Read More »
RF Edgeboard Connector accepts RG59 or RG6 cables.
Connectors

RF Edgeboard Connector accepts RG59 or RG6 cables.

F Type V-Bite(TM) RF edgeboard connector offers up to -40.3 dB return loss at 2.3 GHz. 75 ohm connector is engineered for signal integrity in RF applications, and snaps and locks into place for secure PCB retention during hand or re-flow soldering. It is supported both above and below board to minimize stress on solder area. Manufactured of machined brass, and employing straight-through contact...

Read More »
PCB Interfaces provides up to 300 I/Os per connector.
Electronic Sockets

PCB Interfaces provides up to 300 I/Os per connector.

FleXYZ interfaces provide flexibility in X, Y, and Z axes by specifying number of rows, pins per row, and desired board spacing with standard interconnects. YTT Series headers and YTW Series board stackers mate with YTQ and YTS Series sockets to provide board spacings from 0.329 to 1.165 in. By using YTE Series elevated socket, board spacing can be increased to 1.705 in. Interconnects have 4-6...

Read More »
M12 Field-Wired Connector allows tool-less installation.
Electrical Connectors

M12 Field-Wired Connector allows tool-less installation.

Insulation Avoidance Connector (IAC) has pin-shaped contact that is forced into end of conductor. Pin makes contact with stranded wires of conductor, without removing insulation. Connections are rated for 4 Amps of current. Elastic material of insert ensures proper connection and provides gas-tight and vibration-resistant connector. 4- and 5-pin versions are available, for use with 20 to 26 AWG...

Read More »
PCB Connectors suit GPS applications.
Electrical Connectors

PCB Connectors suit GPS applications.

RTI-8300-04 right angle, MCX, female, surface mount PCB connector is suitable for 50 ohm applications with frequencies up to 6 Ghz. Snap-on mating provides rapid connects and disconnects. RMX-8300-04 offers gold plated machined brass body, gold plated contact, and Teflon® insulation. Suitable for space and weight-limited design criteria, MCX connectors are 30% smaller than SMB connectors,...

Read More »
Power Interface fits 1U power supplies.
Electrical Connectors

Power Interface fits 1U power supplies.

Miniature, compact PCIC Series power connector has ac/dc input, signal, and output contacts in package measuring approximately 0.5 by 1.8 in. Input contacts carry 18 A at 30 deg C temperature rise. Contact terminations include right angle solder, straight solder and straight compliant press-fit. Options include ac pass-through version.

Read More »
Soft Shell Connectors are available in 2 to 12 positions.
Connectors

Soft Shell Connectors are available in 2 to 12 positions.

Micro MATE-N-LOK 3mm-pitch connectors have dual-beam contacts for improved mating area, and high temperature housings for IR processing. Single row contacts on 3mm centerlines accommodate installations where thin, tight connectors capable of handling up to 5 A are required. Units can provide power and signal I/O and power interface interconnections.

Read More »
Do You Have Unique Lifting Needs?
Sponsored

Do You Have Unique Lifting Needs?

EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers