Electrical Conduit is fatigue and impact resistant.

Electrical Conduit is fatigue and impact resistant.

Offered in sizes from 13-54 mm, Flexicon FPI Corrugated Nylon Electrical Conduit protects current-carrying wires and cord sets from moisture, debris, insects, and animals as well as oils, solvents, abrasives, and UV light. It remains flexible and crush-resistant, and withstands wear and tear associated with repetitive motion in robotics and automation. Conduit is temperature rated from -58 to...

Read More »
Fume Control Duct is suited for welding environments.

Fume Control Duct is suited for welding environments.

Used to solve fume control issues in hazardous environments where high heat, sparks, and slag are commonplace, Flame Retardant Fume Control Duct (SF-TPR-FR) features TPR construction for flexibility and use in cramped, limited spaces with tight corners. Product, made with UL 94VO-approved material, has operating temperature range of -40 to +300-

Read More »
Conduit/Tubing is flame-retardant and IP-66/68 rated.

Conduit/Tubing is flame-retardant and IP-66/68 rated.

Available in sizes from -¼-2 in. diameter, FPAS Corrugated Nylon Conduit and Tubing offers flexible wire protection. Smooth interior ensures free movement of all wires completely through. Damage-resistant, corrugated exterior allows tubing to withstand abrasions and lubricating fluids while it fits around tight bends and corners without deformation or fatigue. Suited for all environments,...

Read More »
PTFE Conduit protects wiring and transports fluids.

PTFE Conduit protects wiring and transports fluids.

Extruded PTFE Tubing is suited for use in harsh environments and where chemically inert and non-flammable material is required. Plain, corrugated, and convoluted styles are available extruded from TFE, FEP, and PFA for various degrees of flexibility and kink-resistance. UL-listed product operates over -450 to +450-

Read More »
Plastic Duct System reduces leakage rates.

Plastic Duct System reduces leakage rates.

Model GR8 Duct System is wrapped in blanket of R8 fiberglass insulation and meets R8 codes. Because air stream is over polyethylene plastic, there is no potential to exhaust fiberglass from within ductwork into living space. System includes fitted elbows and T-joints as well as insulated jackets with adhesive tabs. Snap-in-place lockdown clamp eliminates need for male/female unions and tape, and...

Read More »

Cord Management System offers alternative to adhesives.

VersaTech(TM) CordKeeper helps prevent tripping hazards and secures dangling cords. User places it over cords and presses to neatly secure cords to looped carpet. Unit will stay put until lifted off without causing surface damage. At 5 in. wide x 30 ft long, CordKeeper can be cut-to-size for exact fit. It is suitable for tradeshow booths, offices, conference rooms, doorways, and classrooms.

Read More »
Wire Duct eliminates unsightly wire bundles.

Wire Duct eliminates unsightly wire bundles.

Wire Duct consists of 2-piece conduit that routes and encloses wires, eliminating safety issues of exposed wiring. Base section, with concave bottom, mounts via adhesive to 028 mm pipe sections of structures, and top cover snaps into place and locks over base. Plastic resin Wire Duct is offered in 2 m long sections and can be cut to length. Conduit heights include 11, 16, and 21 mm, providing...

Read More »
Wiring Duct comes in rigid and flexible models.

Wiring Duct comes in rigid and flexible models.

PVC Wiring Duct, with non-slip flush cover, mounts directly onto mounting rail or internal mounting plate. Two predetermined break lines allow breaking off and removal of sidewall finger segments and base segments. Rigid duct is available in .5 x .625 to 6 x 4 in. gray or white models. Suited for extreme operating conditions up to 176-

Read More »

Replaceable Duct Filter supplements primary filter systems.

Designed for new or retrofit buildings with air dispersion, cone-shaped Final Filter is zippered within minutes into fabric duct system at inlet. It is available in NAFA-rated, MERV-8 or MERV-12, non-woven, 3M filter media with 50% and 90% efficiencies, respectively. Multi-layer filter media withstands pressure loading while allowing depth loading. Depending on inlet velocity, media, and sizing,...

Read More »
Fittings and Conduit withstand extreme temperatures.

Fittings and Conduit withstand extreme temperatures.

High/Low Temperature Insulated Liquidtight System is rated from -60 to +150?C. HT Fittings feature double beveled sealing ring with 5 sealing mechanisms for true liquid-tight seal. Infinitely adjustable Revolver? Grounding Fitting makes tightening easy in any situation. ATX Flexible Metal Conduit features standard core, thermoplastic rubber jacket, and flammability rating of UL 94-HB. Fittings...

Read More »

All Topics