Data Storage Processor provides 5 high-speed SATA-II ports.
Offering scalable direct attached storage for A/V editing, SOHO, and SMB markets, SteelVine(TM) SiI 4726 supports auto rebuild, auto fail over, hot swap, and hot spare without use of host resources. At 100 GB/hr, processor quickly re-establishes mirrored drive set after failed drive has been replaced. It provides up to 2.5 TB of storage, delivers over 230 MBps of I/O throughput, and supports RAID...
Read More »Multimedia Processors meet Windows CE 5.0 requirements.
Nomadik mobile multimedia processors and associated board support package are suited for smart phones and other mobile devices that play music, take pictures, record video, and host 2-way video communications. Model STn8811 builds on Model STn8800 with video and audio performance, power management, and security framework to protect sensitive data. Models STn8811 and STn8812 offer 256 and 512...
Read More »Intelligent Storage Processor uses ARC(TM) processor cores.
Based on 11 configurable ARC processors, FabricStream(TM) operates at 40 Gbps. It utilizes ARC-Based technology for data path and on-chip control functions as well as wire-speed packet-based processing performance. Targeted at embedded designs, it enables intelligent SAN services such as routing, volume management, data migration, and replication to be integrated into fabric switches, routers,...
Read More »I/O System supports use of open-source technologies.
Linux-based SNAP-ARL-ASDS programmable I/O processor mounts on standard SNAP B-series mounting racks and interfaces with mix of analog, digital, and serial SNAP I/O modules. Featuring RS-232 serial port and 10 Mbps Ethernet connection, system supports multiple file transfer protocols, including FTP and Samba. Programmers can use Linux-based tools to develop custom applications for SNAP-ARL-ASDS...
Read More »Pressure Vessels & Their Components
This white paper provides an in-depth look into custom fabricated pressure vessels and their components.
Read More »Processor provides IC-based motion control.
Available in 1-4 axis configurations, Magellan Motion Processor family control DC brush, brushless DC, microstepping, and pulse and direction motors. They provide profile generation, servo loop closure, PLC-style signal manipulation, and motor signal generation. Driven by host microprocessor, unit offers multi-axis synchronization and 4 selectable profile modes: S-curve, trapezoidal, velocity...
Read More »Processor Blade supports AdvancedTCA platforms.
Suited for carrier-grade solutions, ATC-4130 is based on IntelÃ-® E7501 Chipset with 400 MHz front-side bus, utilizes 2.0 GHz LV Intel XeonÃ-® Processor, and is compliant with PICMGÃ-® 3.0/3.1 specifications for AdvancedTCA platforms. System memory of up to 4 GB is supported via 2 ECC-protected DDR SDRAM modules. Unit uses Pigeon Point's management architecture, and offers 10/100...
Read More »Processor is based on Intel networks.
cPCI-6240, 6U CompactPCI board, supports Processor PMC site for additional control plane processing, PCI Telecom Mezzanine/Carrier Card site for quad OC-3 or OC-12 interfaces, and 4 additional gigabit Ethernet channels. Unit includes 600 MHz XScale(TM) core and eight 600 MHz microengine processors for programming at up to OC-12 line speeds. Processor supports 512 Mbytes DDR DRAM and 4 Mbytes QDR...
Read More »Processors provide data acquisition/control/communication.
TECLA(TM) programmable, PC-based data processors feature 300 MHz x 86 processor and use MicrosoftÃ-® WindowsÃ-® CE.NET operating system. They accept Allen-BradleyÃ-® I/O and include USB, Ethernet, PS/2, serial, and SVGA video ports, which enable connections to plant floor and front office communication and peripheral devices. Disk-on-chip storage device eliminates shock, vibration,...
Read More »Data Acquisition System provides instrument control.
OpenLAB(TM) iCON XP(TM) performs intelligent control and data acquisition of analytical instrumentation. It reduces number of dedicated computers and enables full instrument Ethernet connectivity. System can be configured to collect data from serial, USB, IEEE, SCSI, or analog devices via SS420X A/D converter. Built around embedded Microsoft Windows XPÃ-®, system has expandable 512 MB memory...
Read More »Post Processor works with multiple CAD/CAM data.
VEGAPost 3/5 axes NC Post Processor generates NC code and is fully configured to output correct data for selected machine tool. VEGAPost does not require users to manually edit M/G codes, feeds, and speeds. It allows for multiple files to be selected for posting, displays which files are done, and flags data errors in file. Unit with 5 axes includes head unwinding/rewind, tool length...
Read More »Solve Any Large-scale Water Control Problem with the Aqua Dam Flood Barrier
Aqua Dam is the ultimate solution for large-scale water control projects. It combines lightweight, large size, and portability all in one innovative product. To learn more about the uses, and applications of Aqua Dam, or to see it in action, check out our new video to get all the details.
Read More »