Light-to-Frequency Converter offers output enable option.

Light-to-Frequency Converter offers output enable option.

Housed in 8-pin, SOIC surface mount package, Model TSL238 measures range of light levels from bright sunlight to dim moonlight. Output enable pin provides option of feeding output of multiple devices into single microprocessor input port by enabling one TSL238 device at a time. RoHS-compliant converter has wide dynamic range of over 90 dB at room temperature, is temperature compensated for...

Read More »
Frequency Converter has modular design.

Frequency Converter has modular design.

Featuring motor shaft power to housing volume ratio of 3.6 kW/dmÂ-³, size 7 b maXX can be extended in accordance with application requirements. Construction incorporates short conductor rails, water cooling system, and continuous platform. User can add new functionality to controller via plug-in modules, and all controllers in b maXX range are parameterized via WinBASS II. Product enables...

Read More »
Analog-to-Digital Converters suit software defined radios.

Analog-to-Digital Converters suit software defined radios.

Featuring sampling rate of 105 MS/sec, 14-bit, dual ADC Model LTC2284 delivers flat SNR response of 72.2 dB up to 70 MHz as well as SFDR of 88 dB at baseband. Models LTC2280 and LTC2282 are 10-bit and 12-bit dual ADCs also with 105 MS/sec bandwidth sampling rate. Housed in 9 x 9 mm QFN package, all devices consume 270 mW per channel, with crosstalk between channels of -110 dB. They are optimized...

Read More »
Analog-to-Digital Converter offers output rates to 8 kHz.

Analog-to-Digital Converter offers output rates to 8 kHz.

Able to achieve 1 ppm linearity with integrated amp configured as unity gain buffer, LTC2442 multiplexed, 24-bit ADC features Delta Sigma(TM) architecture that ensures stable dc accuracy through continuous transparent offset and full-scale calibration. Architecture rejects channel-to-channel crosstalk and is immune to lockup due to large input disturbances. With noise as low as 220 nVrms, 10 no...

Read More »
Data Converter delivers 14-bit, 190 MS/sec performance.

Data Converter delivers 14-bit, 190 MS/sec performance.

Manufactured in 48-pin, 7 x 7 mm QFN package, ADS5546 operates from 3.3 V supply and provides programmable power scaling as well as user-selectable output timing and level controls. Featuring 1.1 W total power dissipation, 14-bit ADC offers 73.2 dBFS SNR and 84 dBc SFDR at max sample rate of 190 MS/sec, with input frequency of 70 MHz. Along with user-selectable CMOS or DDR LVDS outputs, unit has...

Read More »

Protocol Converter connects automation devices to Profinet.

Designed for DIN rail mounting, Anybus Communicator allows devices without built-in Profinet interface to be connected to Profinet networks. Serial interface between Communicator and field device supports RS-232, RS-485, and RS-422 signal levels at baud rates of up to 57 kbit/s. Using RS-485 interfacing, up to 31 automation devices can be connected via one Communicator to Profinet. Device also...

Read More »

Expansion Modules perform DVI/TTL and TTL/DVI conversion.

Featuring Mini-PCI form factor, PER-V01B module performs DVI to TTL signal conversion and supports up to 1,600 x 1,200 pixel resolution. For AAEON boards with dual view functions, module provides support for 2 LCD panels and can be bundled with PCM-3538T to convert DVI to LVDS signals. Module PER-V02B, which performs TTL to DVI signal conversion, also has Mini-PCI form factor and can supply power...

Read More »

Triple ADCs suit digital video applications.

Comprised of 8- and 10-bit triple ADCs, TVP700x series provides up to 150 and 165 MS/sec for high-definition video and PC graphics. Each offers integrated PLL, output formatter, and support for 3 digitizing channels. Featured on DDP2000 DLP reference design, TVP7000 supports 1080p video inputs, while TVP7001 is available with DDP3020 DLP reference design and increases PC graphics output to 1,600...

Read More »

VME Card offers synchro/resolver measurement/simulation.

High-density, DSP-based 64CS3 includes 8 separate S/D and 6 separate D/S converter channels with 16-bit resolution, digital velocity outputs and programmable single- and 2-speed operating modes. Along with isolated I/O, product features wrap-around self-test and optional 5 VA Programmable Reference Supply. Accuracy for measurement channels is 1 arc-min, and accuracy for simulation channels is 30...

Read More »

Low-Latency, 16-Channel ADC provides fully settled data.

Manufactured in 7 x 7 mm QFN-48 package, ADS1258 is fabricated on precision mixed-signal CMOS technology and optimized for multi-channel applications. This 24-bit ADC offers fixed-channel (125 kS/sec data rate) or automatic channel scan (23.7 kS/sec data rate) modes with 20 bits of effective resolution. Along with low latency (42 Â-µs), product features externally accessible output,...

Read More »

All Topics