New Modules Products

Multifunctional I/O Module is USB-based.

Plug-and-play data acquisition module, Model USB-4711, features 100 kS/s 12-bit A/D converter with on-board 1 kS FIFO buffer. It provides up to 16 single-ended A/D input channels, two 12-bit D/A output channels, 8 digital inputs, 8 digital outputs, and 1 event counter. Module is equipped with on-board screw terminals for wiring, Windows driver, and ActiveX and LabVIEW driver support. It obtains...

Interface Module offers 2 safety-rated, solid-state inputs.

Safety at Work SB-INT-01 AS-Interface Module enables operation of sensor-driven personal protection equipment across AS-Interface bus. IP67-rated unit includes 5 status indicators, as well as status display for bus, auxiliary supply, and inputs. When used with AS-I safety monitor and STI type 4 light curtain or laser scanner, module satisfies safety requirements as defined by category 4 per EN...

POL Power Modules feature 1.5% output voltage regulation.

Non-isolated, plug-in T2 Series supports step-down dc/dc conversion from 4.5-14 V input with adjustable output voltages down to 0.7 V at output currents up to 50 A, making them suited for IBA applications. TurboTrans(TM) technology enables power supply designer to dynamically tune modules using single external resistor to meet specific transient load requirement, and SmartSync function allows...

PC/104-Plus Video Module targets embedded applications.

Offering add-on video output for embedded applications using ATi Rage Mobility M1 graphics controller, Model EPM-VID-3 supports range of display types, including desktop/CRT displays, LVDS flat panels, and NTSC video monitors. It features 8 MB video RAM, up to 3 simultaneous display outputs, hardware-based MPEG-2 decoding, and customizable video BIOS. Module supports applications with resolutions...

A Definitive Guide to Air Gaps in Magnetic Separation Equipment

This guide discusses how air gaps affect magnetic separation applications.

Power Entry Modules have IEC 60320 C20, class I inlet.

Filtered C20 Inlet Power Entry modules are intended for computer, medical, general-purpose, and custom indoor type equipment applications that benefit from use of one component that provides filtering and ac power entry for detachable C19 cordsets. Configured with IEC 60320-1-1 C20 inlet and filter, products carry max rating of 20 A @ 250 Vac. Features include screw-mount, nickel-plated, shielded...

Power Modules have wide output voltage range.

Available 22 x 12.4 x 8.3 mm SMT and thru-hole packages, lead-free, non-isolated dc/dc power modules have -40 to +85Ã-

T1/E1 LIU/Framer suits optical transport applications.

Voyager XRT86SH328 integrates 28-channel T1/E1 LIU/framer with VT/VU Mapper/DeMapper and M13 multiplexer. Each LIU channel supports R3 Technology, making unit reconfigurable, with integrated termination supporting all T1/E1/J1 line impedances. Architecture supports SONET/SDH compliant T1/E1 de-synchronizers in drop direction in addition to jitter attenuator functionality in add direction. Unit...

Analog Input Module offers functionality of 4 modules.

PACSystems(TM) RX3i Universal Analog Input Module provides up to 30 different types of analog input configurations. Eight channels can be individually configured using Proficy(TM) Machine Edition software for voltage, current, thermocouple, RTD, and resistance inputs. Module includes 6 filter frequencies, full auto-calibration, on-board error checking, open-circuit detection for most input types,...

Remote I/O Modules require no user-configuration.

DeltaV Remote I/O is suited for Zone 1 and Zone 2 or Class 1, Division 2 applications. Zone 2 scanner addresses up to 8 discrete or analog I/O cards, which can be targeted to 1-4 controllers, while Zone 1 scanner works with up to 4 intrinsically safe I/O cards that have I/O on each card. Separate I/O cards can be replaced in-field without shutting down module. DeltaV system can have up to 60...

Ethernet I/O Modules combine 3 functions in one model.

Combo 951EN and 952EN Ethernet I/O Modules feature 4 analog input channels, 2 analog output channels, and 6 discrete I/O channels on single 1 in. wide unit. They support Ethernet/IP and Modbus TCP/IP protocols as well as i2o(TM) communication technology. Since Combo modules have inputs and outputs, they can function as transmitters and receivers to independently interface signals. Three-way 1,500...

Von Ruden's Driven Tools Are Built to Last

Von Ruden's driven tools are designed to each specific machine in order to maximize performance. All of our tools are performance tested and made in the USA per ISO 9001:2015 standards. Check out our video to learn more.