New Compounds Products

Safe Seal Materials protect drinking water systems.

Sealing materials meet NSF Standard 61 protecting potable water from contaminants that leach or migrate into water from traditional components. Organic materials include 10 EPDM compounds, 7 thermoplastic elastomers, and 2 nitrile compounds that can be formed into faucet and shower gaskets, water filter gaskets, valve seals and seats, pipe coupling seals, and diaphragms and O-rings used in pumps,...

Custom Compounds produce speckled parts.

Speckled Dyneon(TM) Custom PTFE Compounds are produced by mixing PTFE with inorganic or organic fillers, which improve wear and abrasion resistance, reduce deformation under load, and add color. Compounds are offered in free-flow and pre-sintered grades. Speckled parts feature temperature resistance up to 500-

Composite blocks engine heat and noise.

TUFCOTE-® RM-10-75 3-layer composite works as noise barrier and heat reflector for engine-driven vehicles and equipment. It has 3/4 in. urethane foam decoupler, lead-free vinyl barrier, and top facing of aluminized, scrim-reinforced polyester. With barrier toward noise and heat source, barrier contains noise, and shiny reflective facing reduces heat transfer. Scrim reinforcement limits punctures...

Epoxy Compound features one to one mixing ratio.

Type 20-3650 electronic grade epoxy potting, casting, and encapsulating system exhibits excellent physical, thermal, and electrical insulation properties. Tensile strength is 11,000 psi and compressive strength is 15,500 psi. Compound is DOT non-hazardous, easy to mix, and will cure at room temperature or with mild heat. Operating temperature range is -60 to +150-

Hidden Supply Chain Risks in Chinese Procurement

To learn more about strategies you can use to avoid hidden risks commonly associated with Chinese supply-chains, download now.

Injection Molding Compounds resist impacts, chemicals, and fires.

Fire rated Kydex(R) compounds include 10 injection molding and 20 extrusion grades carrying fire ratings of UL Std 94 V-0/5V, FAR 25.853 (a) and (d), ASTM E-162, ASTM E-84, UL 723, UL 2043, UL 756C and/or Class 1/A. Also available are UL 705-rated grades meeting above-the-ceiling air plenum smoke release requirements. Compounds have impact resistance to 18 ft-lb/in., tensile strength to 6500 psi,...

Casting Compound suits embedding and casting applications.

Flexible TRA-BOND 240-2 low-viscosity, polyurethane-casting system, suitable for low-vacuum applications, is NASA outgassing approved, and has near-zero shrinkage, providing low residual stress. Compound bonds to ceramics, glass, metals, and many plastics. Fully cured adhesive acts as electrical insulator.

Silicone Compound comes in syringe applicator.

Non-flammable, non-corrosive Silicone Compound is made of zinc filled polysiloxane. It enables low-loss thermal pathway for heat transfer between semiconductors and heat sinks by displacing air gaps between mating surfaces. Compound forms non-curing seal and maintains flexibile consistency within temperature range of -40 F to 500 deg F. It provides dielectric strength of 250-350 volts/mil and...

Purging Compound removes barrel residue in a single purge.

Utilizing reactive chemistry, NuPurge Technology (NPT) Compound performs at all temperatures between 160 and 600 deg F. It consists of concentrated purge pellets that react chemically to heat, quickly cleaning machinery without extra soak time. NPT requires no mixing or preparation. It is non-hazardous, FDA compliant and free of harsh odors.

Encapsulant/Potting Material exhibits

Ceramacast(TM) 510 aluminum oxide based, hydraulic-setting ceramic compound potting material can be used to encapsulate cartridge heaters and embed high temperature components to 3200-ºF. Supplied as dry powder, Ceramacast 510 is bonded using calcium aluminate and as-cast. Its dried density is 180 lbs/ft3, and it exhibits exceptional thermal conductivity and dielectric strength of 75-100...

Compound is used for underfill and encapsulating applications.

TRA-CAST 3108 two part epoxy casting paste works on wide range of surfaces, including glass, ceramics, metals, plastics, and many electronic materials. It is all-liquid, low viscosity product with good flow and wetting characteristics. Casting compound can be cured at room temperature with little or no shrinkage, and it resists all weather conditions, gases, galvanic action, petroleum fuels,...

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.