RF& Microwave Frequency Modulators & Demodulators

Communication Systems & Equipment, Controls & Controllers, Electrical Equipment & Systems, Electronic Components & Devices, Optics & Photonics

Altera Demonstrates Its Comprehensive FPGA, SoC and Power Solutions at APEC 2015 Offering Greater Efficiencies in Electronic Design

Mar 16, 2015

Solutions for Integrated Digital DC-DC Power Conversion, Envelope Tracking Voltage Modulation, and Multi-axis Motor Control SAN JOSE, Calif. and CHARLOTTE, N.C., -- APEC 2015 - Altera Corporation (NASDAQ: ALTR) is demonstrating its portfolio of FPGA and power solutions at the Applied Power Electronics Conference, (APEC) being held at the Charlotte Convention Center, in Charlotte, North Carolina,... Read More

Communication Systems & Equipment, Electronic Components & Devices, Test & Measuring Instruments

TI Adds RF Gain Blocks, Mixers and Modulator to Product Lineup

Jun 11, 2014

New high-performance RF building blocks are optimized for power and performance DALLAS, -- Texas Instruments (TI) (NASDAQ: TXN) expanded its RF portfolio today with the addition of high-performance RF gain blocks, down-converting mixers and a complex modulator that provide the industry's best combination of power and performance. The new RF devices are being demonstrated this week in TI's booth... Read More

Communication Systems & Equipment, Electronic Components & Devices

Analog Devices Introduces High-Performance RF ICs for Multi-band Base Stations and Microwave Point-to-Point Radios

Jun 11, 2014

New programmable, highly integrated modulator, demodulator and dual-mixer simplify design in 3G/4G communications, military/aerospace and instrumentation equipment applications. IMS2014 TAMPA, Fla.-- INTERNATIONAL MICROWAVE SYMPOSIUM-- Analog Devices, Inc. (NASDAQ: ADI) today introduced new highly integrated RF ICs that greatly simplify the design and reduce the development cost of multi-band... Read More

Communication Systems & Equipment, Green & Clean, Optics & Photonics

Modulators are available for satellite or terrestrial operations.

Apr 09, 2013

As independent 1RU system compatible with any existing environment or module for embedding in any 1RU Telairity encoder, Orion modulators for satellite or terrestrial operations fully comply with DVB, ATSC, and ISDB-T standards. Orion 6500 satellite models come with QPSK, 8PSK, 16APSK, and 32APSK, offering rates up to 68 Mbaud. Orion 6600 terrestrial models allow DVB-T2/T2 transmitters to... Read More

Communication Systems & Equipment

Distributed Antenna Systems maximize indoor wireless coverage.

Apr 08, 2013

EtherDAS 1.5™ and EtherDAS S™ can achieve passive intermodulation (PIM) performance of -153 dBc in all 2G, 3G, and 4G bands – from 700 MHz to 2.7 GHz. While EtherDAS 1.5 provides Voltage Standing Wave Ratio (VSWR) spec of <1.5:1 for optimum impedance match, EtherDAS S employs proprietary technique to shape antenna's radiation pattern and thereby optimize wireless coverage within... Read More

Communication Systems & Equipment, Electronic Components & Devices

M/A-COM Technology Solutions Announces New Modulator Drivers for 100G Applications

Sep 24, 2012

Amsterdam, NL- M/A-COM Technology Solutions Inc. (M/A-COM Tech), a leading supplier of high performance analog semiconductor solutions, introduced today at the ECOC Exhibition, Amsterdam, two new modulator drivers for 100G Ethernet applications. Packaged in a 4.7mm x 6.5mm SMD package, the MAOM-002108 is a high performance MZ modulator driver operating up to 28 Gbps. The driver IC has a very low... Read More

Communication Systems & Equipment, Test & Measuring Instruments

LeCroy to Offer Complete Optical Modulation Analysis System Using Southern Photonics "IQScope" Technology

Mar 20, 2012

CHESTNUT RIDGE, N.Y., - LeCroy Corporation announced today that it will launch an Optical Modulation Analyzer (OMA) to work in conjunction with their world leading WaveMaster and LabMaster series of real-time oscilloscopes featuring real-time bandwidths up to 60 GHz. The new OMA will be debuted at the ECOC Exhibition, Amsterdam, Sept. 17-19th, 2012. LeCroy and Southern Photonics have entered into... Read More

Communication Systems & Equipment

Oclaro Strengthens 40 Gbps and 100 Gbps Coherent Portfolio with New Micro-iTLA and Volume Production of Modulators and Receivers

Mar 19, 2012

New Micro - iTLA Delivers 3X Reduction in Size; 100 Gbps Coherent Receiver Provides 50 Percent Reduction in Form Factor; Modulators Raise the Bar on Spectral Efficiency SAN JOSE, Calif., March 5, 2012 - Oclaro, Inc. (NASDAQ: OCLR), a tier - one provider and innovator of optical communications and laser solutions, today announced that it has further strengthened its 40 Gbps and 100 Gbps coherent... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Labels Tags Signage & Equipment

RFID Printer/Encoder enables advanced item-level tagging.

Mar 17, 2011

Incorporating Adaptive Encoding technology, Model R110Xi4 can detect RFID inlay position within label and automatically configure printer/encoder without having to manually calibrate for inlay, ensuring tag accuracy. On-pitch encoding offers ability to print/encode small tags very close together with distance as narrow as .6 in. Model R110Xi4 streamlines supply-chain management applications such... Read More

Communication Systems & Equipment

Oclaro Delivers 100Gb/s Transmission Speeds with its New LiNbO3 'PM100' Modulators

Sep 23, 2010

Through its Complete Portfolio of 100 Gb/s Components, Oclaro Enables Customers to Reduce Cost and Speed Time to Market SAN JOSE, Calif., -- Oclaro, Inc. (NASDAQ:OCLR), a tier-one provider of innovative optical communications and laser solutions, today announced its support for the upcoming 100Gb/s optical network applications with its new LiNbO3 "PM100" modulators. With the addition of these new... Read More

Communication Systems & Equipment, Electronic Components & Devices

RF Mixers and Modulators enable high-density radio cards.

Oct 14, 2009

Designed for LTE and 4G cellular base stations, ADRF660x Mixers and ADRF670x Modulators each combine multiple discrete functional blocks into single device. ADRF670x models integrate analog I/Q modulator with input bandwidth of 500 MHz, RF output switch, and PLL with VCO in one RFIC, while ADRF660x models integrate high-linearity active RF mixer, RF input balun for single-ended 50 Read More

Communication Systems & Equipment

Stimulus Transmitter features optional WiMAX modulator.

Sep 10, 2009

Dual-band stimulus transmitter Tortoise(TM) is offered with optional OFDMA modulator designed for simulating WiMAX base station transmissions and network traffic. Modulator, when used with Tortoise(TM), can deliver 10 W of Class A output from 2.5-2.7 and 3.4-3.7 GHz with user selectable data such as ID Cell, segment, and frame length. Transmitter features dual Class A amplifiers that... Read More

Communication Systems & Equipment, Electronic Components & Devices

Sigma-Delta Converter targets 900 MHz band RF applications.

Aug 15, 2008

Operating from 840-960 MHz, Model ADF9010 integrates Tx quadrature modulator with integer-N synthesizer and on-chip VCO, achieving LO phase noise of -140 dBc/Hz at 1 MHz offset. Rx low pass filter gain is programmable from 3-24 dB in 3 dB steps. Filter features 4 programmable modes, with auto-calibrated cutoff frequencies of 330 kHz, 880 kHz, and 2 MHz. Transmit path delivers OIP3 of 24 dBm,... Read More

Communication Systems & Equipment, Optics & Photonics

Mach Zehnder Modulator Chip measures 5 mm.

Feb 27, 2008

Implemented through indium phosphide Mach Zehnder (InP MZ) technology, 40 Gbps Optical Differential Quadrature Phase Shift Keying (ODQPSK) modulator chip can be used in both 10 and 40 Gbps systems. It also allows 40 Gbps to be deployed onto 50 GHz grid, and demonstrates high resilience to polarization mode dispersion. Read More

Communication Systems & Equipment, Electronic Components & Devices

Quadrature Modulator suits GSM cellular basestations.

Jan 30, 2007

Optimized for 850-965 MHz GSM, CDMA2000, ISM, and RFID modulator applications, Model LT5571 comprises 2 matched mixers, 50 W LO input buffer, 0/90° LO phase shifter, and on-chip RF output transformer operating within 620-1,100 MHz band. Device accepts I and Q baseband signals and modulates directly to RF. It features OIP3 of 21.7 dBm and OIP2 of 63.8 dBm at 900 MHz... Read More

Automatic ID, Communication Systems & Equipment, Computer Hardware & Peripherals, Labels Tags Signage & Equipment

RFID Printer/Encoder is suitable for high volume applications.

Oct 27, 2006

Built on XiIIIPlus(TM) platform, R110Xi high frequency (HF) radio frequency identification (RFID) tabletop printer/encoder offers 4 in. print widths, 203 and 300 dpi print resolution, and XML encoding. It encodes passive inlays using multi-protocols such as ISO15693 and ISO18000-3 mode 1, and provides MIFARE® ultralight support. Industrial, multi-protocol RFID solution is suitable for... Read More

Communication Systems & Equipment, Electrical Equipment & Systems

Switch is suited for cross-modulation in Cell and PCS paths.

Jul 20, 2006

MASWSS0191 GaAs SP3T 2.6 V CDMA-GPS Switch features linearity up to 3.0 GHz, typical insertion loss of 0.65 dB, and IIP3 of 58 dBm. Switch has 2 mm 8-lead STDFN packaging and is fabricated on 0.5-micron gate-length GaAs PHEMT process with full passivation. Suited for CDMA handsets and applications requiring switching on single antenna, switch maximizes system linearity performance while... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Labels Tags Signage & Equipment

Medium-Duty Label Printer offers RFID Gen 2 capabilities.

Oct 20, 2005

Able to encode and verify RFID labels, AVERY DENNISON AP 5.4 RFID Printer produces 1D and 2D bar codes, graphics, and human-readable copy on label surfaces. Microprocessor-driven unit features detect-and-reject capability for improperly encoded labels, which are identified via printed marker. Product processes 4 x 2, 4 x 4, and 4 x 6 in. RFID label sizes. Featuring Ethernet, serial, and parallel... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Labels Tags Signage & Equipment, Material Handling & Storage

RFID Encoder/Applicator tags up to 100 cases/min.

Oct 20, 2005

Suited for tagging cases of consumer goods, 800 Series RFID encoder/applicator is EPCglobal Gen 2 compliant and provides flexible tag placement options to meet positioning requirements for all types of products. It features remote status and configuration reporting capability and can handle all form factors of RFID tags, including application of on-pitch inlays. Product is designed to integrate... Read More

Automatic ID, Communication Systems & Equipment, Labels Tags Signage & Equipment

UHF RFID Printer/Encoder meets European specifications.

Jun 01, 2005

Model R4Mplus features integrated support for ISO 18000-6B and Philips U-Code 1.19 transponders. It is configured to support European specifications and regulatory requirements and can operate at 100% duty cycle relative to encoding tags. Unit supports emerging protocols via firmware upgrades, and by offering XML-enabled printing, it can integrate with ERP applications. Native support for UNICODE... Read More