Edge Tape withstands work and foot traffic.
Tapes

Edge Tape withstands work and foot traffic.

Edge Tape™ is designed to bond with Ram Board surface protection products and helps in holding firmly in place. The unit can be easily released from surfaces by keeping them clean. Having 2.5 in. width, tapes safety orange color helps in easily identifying the edge of work area. Tape can be removed cleanly without any residue even after 14 days on the surfaces.

Read More »
The New LazerArc Division of Motion Index Drives Offers Custom Heavy Duty Engineered Positioning Solutions for Today's Manufacturing Automation Needs
Positioners

The New LazerArc Division of Motion Index Drives Offers Custom Heavy Duty Engineered Positioning Solutions for Today's Manufacturing Automation Needs

LazerArc was established by Motion Index Drives in 2017 to separate the custom engineered solutions from standard product offerings for those customers looking for a wider selection of machinery to suit today's manufacturing automation needs. Backed by over 45 years of automation experience, LazerArc product lines include Single Axis 2 - Axis 3 - Axis and 4 and 5 Axis positioning and Robot...

Read More »
GPS L1/L2 + GLONASS G1/G2 Antennas are equipped with pre-filters.
Antennas

GPS L1/L2 + GLONASS G1/G2 Antennas are equipped with pre-filters.

GPS L1/L2 + GLONASS G1/G2 Antennas are available in TW1829 and TW8829 models. Units come with connectors and custom cable lengths. Products are suitable for unmanned aerial vehicle applications and use Tallysman’s Accutenna® technology. TW1829 weighs 37 g and measures 48mm (d) x 12.2mm (h) whereas TW8829 comes in 52 g and 47.3mm (d) x 18.3mm (h) size. Antennas offer high level rejection of...

Read More »
WI-I/O-2-E-N-GBL Wi-Fi Gateway Modem offers IP-based networking.
Modems

WI-I/O-2-E-N-GBL Wi-Fi Gateway Modem offers IP-based networking.

WI-I/O-2-E-N-GBL Wi-Fi Gateway Modem features internal radio transceiver and provides two-way wireless communications. Product supports base, repeater, and remote functionality. Modem’s transceiver uses Weidmuller’s ProMesh redundancy protocol. WI-I/O-2-E-N-GBL is compatible with Modbus® TCP/RTU and DNP3 and offers an easy-to-configure hot spot capability. Suitable for industrial...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Hydraulic Chucks and Holders are suitable for metalcutting industry.
Chucks and Collets

Hydraulic Chucks and Holders are suitable for metalcutting industry.

EPB 5831 Slim Hydraulic Chucks are available in HSK-A63, HSKA100, BT 40 and Seco-Capto™ C5 machine side connections. EPB 5831 can accommodate 6 mm, 8 mm, 10 mm and 12 mm tool diameters and is offered in projection lengths of 150 mm and 200 mm. ER-to-Combimaster™ holders are available in 25, 32 and 40 ER sizes and five thread-size connections ranging from M8 to M20. Holders come with ER taper,...

Read More »
Mounts

Unirac Inc. Announces Significant Advancements to its SOLARMOUNT PV Mounting System

LAS VEGAS, Sept. 11, 2017 - Unirac, Inc. unveiled significant advancements to its SOLARMOUNT residential PV mounting system during this week's Solar Power International at the Mandalay Bay Convention Center. Updates to the system were wide-ranging, but all focused on superior system aesthetics and making work easier for solar installers. "SOLARMOUNT has long been the standard in the industry,...

Read More »
50dB GNSS Antennas are available in flat or conical shapes.
Antennas

50dB GNSS Antennas are available in flat or conical shapes.

50dB GNSS Antennas are available in TW3152 and TW3752 models. Units are suitable for timing and GNSS re-radiator systems. Products use Tallysman’s Accutenna® technology and are offered in white or grey colors. The TW3152 offers reception of GPS L1 where as TW3752 provides reception of GPS L1, GLONASS G1, BeiDou B1 and Galileo E1 signals. Antennas are triple filtered which prevents the...

Read More »
Tallysman's® Antenna Selected as Part of the Open Cellular Design
Antennas

Tallysman's® Antenna Selected as Part of the Open Cellular Design

Ottawa, Canada – September 1, 2017 – Tallysman, a leading manufacturer of economical high performance GNSS antennas and related products, is pleased to announce that Facebook has selected Tallysman’s TW2643POC GPS/Iridium antenna for the Facebook Open Cellular Platform. The TW2643POC employs Tallysman’s unique Accutenna® technology in a magnet mount, passive right hand circularly...

Read More »
DDHXA-75/100 Underground Puller comes with 3-speed gearbox.
Pullers

DDHXA-75/100 Underground Puller comes with 3-speed gearbox.

Featuring BOSS air compressor, Duct Dawg Air DDHXA-75/100 Underground Puller can pull up to 7,500 or 10,000 lbs. Unit is hydraulically driven and controlled wirelessly. Product comes in 16 ft footprint and uses CANbus technology. Underground Puller is suitable for utilities and contractors and comes with a 3-axis boom. DDHXA-75/100 is equipped with twin capstan bullwheels.

Read More »
V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.
Positioners

V-408 Linear Motor Stage is equipped with 3-phase linear motor drive.

V-408 Linear Motor Stage is designed with high load capacity precision crossed roller elements with anti-creep cage assist. Delivering a velocity up to 1.5m/sec, unit’s linear encoder offers 10 nm resolution. V-408 is available in 1 in. and two in. models with 25mm and 50mm travel range and provides 20nm minimum incremental motion and geometric performance with 4µm straightness and flatness....

Read More »
Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life
Sponsored

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.

Read More »

All Topics