New ATH-ANC700BT Wireless ANC Headphones Feature Touch and Swipe Control System
Headphones

New ATH-ANC700BT Wireless ANC Headphones Feature Touch and Swipe Control System

New ATH-ANC700BT Wireless Active Noise-Cancelling Headphones are offered in Matte Black finishing and are enabled with Bluetooth® technology. Units offer frequency response in the range of 5 Hz – 40,000 Hz with impactful bass and extended treble. The Headphones are compatible with Bluetooth AAC, aptX® and SBC codecs and provide Hi-Res audio compliant playback from audio sources via 3.5 mm...

Read More »
New SDW 5000 Series DECT Headsets Come with Advanced Security Protocols
Headsets

New SDW 5000 Series DECT Headsets Come with Advanced Security Protocols

SDW 5000 Series Wireless DECT Headsets are available in ear hook, headband and neckband wearing styles and provide struggle-free communication in work environments. Units come with Super Wideband Audio for headset communication. The headsets are equipped with two microphone noise-cancelling system and own-voice detector for filtering out background noise. Units are embedded with merging/unmerging...

Read More »
New TS-832X Quad-Core NAS System Supports Qtier Technology for Auto-Tiering
Network Equipment

New TS-832X Quad-Core NAS System Supports Qtier Technology for Auto-Tiering

TS-832X 8-bay Quad-Core NAS System is embedded with QTS NAS operating system with block-based snapshots enabling comprehensive data protection and instant restoration. Unit comes with 3.5/2.5 in. SATA 6Gbps HDD/SSD, 1x SODIMM DDR4 slot, 2x PCIe slots and 2x 10GbE SFP+ LAN ports, 2x Gigabit RJ45 LAN ports. The NAS system features Alpine AL-324 quad-core 1.7 GHz Cortex-A57 processor with 2GB/8GB...

Read More »
New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz
Receivers

New PWPR-2K Picowatt Photoreceiver Provides Bandwidth from DC to 2 kHz

FEMTO’s PWPR-2K Picowatt Photoreceiver is designed for cw-measurements and time resolved signal acquisitions. Unit can detect optical powers from about 100 fW up to 10 nW when used in combination with lock-in amplifiers. PWPR-2K Photoreceiver is available in Si and InGaAs models with wavelength ranging from 320 to 1700 nm. Unit offers a swithable gain of 10⁹ V/A, 10¹⁰ V/A and NEP ≤ 10...

Read More »
New AMC588 Transceiver Features On-Chip Programmable Digital Filters
Transceivers

New AMC588 Transceiver Features On-Chip Programmable Digital Filters

VadaTech’s AMC588 Transceiver is designed for SDR, SATCOM, 3G/4G micro and macro BTS, antenna systems, research and instrumentation. The AMC588 consists of four AD9371 modules connected to Virtex UltraScale+™ FPGA. With an operating frequency range of 300 MHz to 6 GHz, AD9371 module supports TDD and FDD operation. Unit is compatible with Analog Devices RadioVerse™ design tools and offers...

Read More »
ComNet Introduces A Serial Data to Ethernet Terminal Server
Network Equipment

ComNet Introduces A Serial Data to Ethernet Terminal Server

ComNet’s Gen2 CNFE3DOE2/M is a serial data to Ethernet terminal server and media converter. It takes RS232, RS422 and RS485 serial data, converts it to IP, sends it over an Ethernet network and converts the data back at its destination. It controls remote hardware, allows simultaneous local and remote access, handles any combination of two serial data circuits inserted onto any Ethernet network...

Read More »
Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets
Holders

Smart Maintenance Mechanics Ensure Significantly Higher Uptime: Multitest Quick Lock for Test Sockets

Rosenheim, Germany, May 2018: Multitest’s Quick Lock Contact Unit Holder (CUH) for ecoAMP and DuraKelvin Plunge-to-Board set-ups on the MT9928 gravity feed handler has been adopted as the standard mounting solution by one of Multitest’s largest automotive customers. Quick Lock demonstrated substantial reductions in maintenance, debugging, and repair times. The Quick Lock CUH allows for quick...

Read More »
Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections
Mounts

Piab's New Suction Cup Mount is Designed for Industry Standard End-of-Arm Tooling Connections

Piab’s Suction Cup Mount comes with interchangeable parts for mix and match mounting system. Unit provides mounting options such as Universal joint, mount (2 x 8/10.5mm), Lock-pin (19mm), and Ball-joint. Offered in lengths from 45 to 200 mm, mount is designed for handling, for instance, automotive body parts or plastic details. Unit’s ball-shaped fastener comes with an optional mechanism and...

Read More »
Communication Systems

Ecosmob's New VoIP Softswitch Blends Features of Class 4 and Class 5 Softswitch

Custom VoIP Softswitch solutions from Ecosmob are an effort to align solutions to objectives and expectations and to provide a more fluid and seamless experience. Ecosmob’s open source development leverages class 4 softswitch and class 5 softswitch while incorporating session border controller, WebRTC, and a host of other services for unified communication channels. Applications include...

Read More »
Yamaha's Latest AV Receivers and Speakers Feature MusicCast Surround Technology
Signal Receivers

Yamaha's Latest AV Receivers and Speakers Feature MusicCast Surround Technology

Yamaha offers 4K AV receivers (RX-V485, RX-V585 and RX-V685) and speakers (MusicCast 20 and MusicCast 50). The AV receivers support HD Audio decoding of Dolby® TrueHD and DTS-HD Master Audio™ sound tracks and feature YPAO auto-calibration and Cinema DSP technologies. RX-V685 model provides dual HDMI outputs. MusicCast Speakers can be used as standalone audio systems or as wireless surround...

Read More »
Solder Redefined
Sponsored

Solder Redefined

Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.

Read More »

All Topics