Communication Systems & Equipment

Communication Systems & Equipment, Electrical Equipment & Systems, Electronic Components & Devices

Filtered DC Power Entry Module meets demands for EMC.

Jul 12, 2010

Featuring flexible wire leads that facilitate installation, 5003 series features standard DC connector encased within single-stage filter for currents up to 15 A at 125 Vdc. Unit mounts to equipment enclosure with broad metal flange, providing optimal contact area for maximum shielding and filter efficiency. PCB mounting style version is available with optional snap feet for safe fastening.... Read More

Communication Systems & Equipment

Relay Module facilitates, accelerates RF product development.

Jul 09, 2010

Offered as pre-certified OEM product, Relay Function Module 2 helps bring RF-based product to market and can be customized to meet labeling requirements. It provides 4 latched or momentary relay outputs capable of switching external AC/DC powered loads up to 7 A. Tested for FCC, Industry Canada, and European CE compliance, product incorporates LR Series receiver to allow selectable addressing... Read More

Communication Systems & Equipment, Electronic Components & Devices

Multimedia TV Demodulator is offfered in 48-pin, 7 x 7 mm QFN package.

Jul 09, 2010

Incorporating satellite, terrestrial, and cable reception on single IC, Si2167 interfaces to Si217x hybrid silicon tuner. Flexible terrestrial and cable intermediate frequency interface is also compatible with standard mixer oscillator phase-locked loop based metal can tuners. For DVB-S/S2 applications, it supports common Zero IF tuner solutions by integrating 2 on-chip ADCs. Power dissipation is... Read More

Communication Systems & Equipment

Advanced Lighting & Sound Installs FOR-A Switchers at Kensington Church Campuses

Jul 08, 2010

CYPRESS, Calif., - Advanced Lighting & Sound, based in Troy, Mich., has recently installed multiple FOR-A HVS-300HS HD/SD digital video switchers at the campuses of Troy, Mich.-based Kensington Community Church. As a nondenominational church with about 10,000 attendees per Sunday and growing, its video production tasks demand switchers that allow for the flexibility of a growing church while also... Read More

Communication Systems & Equipment, Electrical Equipment & Systems, Test & Measuring Instruments

Power Quality and Utility Analyzer features modular design.

Jul 08, 2010

Suited for utility metering, for both imported and exported energy, WM30-96 provides accurate electrical parameter measurements with 0.2% accuracy (current/voltage) and basic power quality analysis, up to 32nd harmonic. Unit works with single-, two-, and three-phase systems, and offers RS485, RS232, Ethernet, and BACNet-IP, as well as relay, transistor, and analog output options. LCD display can... Read More

Communication Systems & Equipment

Belden Equips Hirschmann(TM) Access Points with HiLCOS 8.00 WLAN Firmware to Meet the New European 5 GHz Standard

Jul 08, 2010

HiLCOS 8.00 is Belden's new WLAN firmware that fulfills all the requirements of the new EN 301893 V1.5.1 standard, which regulates the operation of WLAN devices in 5 GHz environments.. With this new EN 301893 V1.5.1 WLAN standard, which will come into effect across Europe on July 1, 2010, the European regulatory authority ETSI is implementing more stringent requirements for dynamic frequency... Read More

Communication Systems & Equipment

Penta-Band Plus GPS Antenna is intended for telematics.

Jul 08, 2010

Supplied in 136 x 38 x 14 mm package, W4120 Series active GPS antenna provides location-based information that can be communicated back to tracking location via wireless frequencies around world. Amplifier input voltage of 3 or 5 Vdc provides 26 dBic of gain and compatibility with receivers. IP67-rated housing is suitable for outdoor use, and operating range coves 5 frequency bands - 824-894 MHz,... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals

Console KVM Switch offers built-in IP access.

Jul 02, 2010

Combining 19 in. LCD monitor, keyboard, mouse, and 8-port KVM switch in slide-out 1U rackmount housing, Model B020-U08-19-IP offers built-in IP capability, which enables it to control multiple computers or servers from single console from any location via LAN, WAN, or Internet. Switch supports RADIUS and LDAP/S authentication, and uses P778-Series USB/PS2 Combo KVM Cable Kits for connection to... Read More

Communication Systems & Equipment

Weatherproof External Antennas target 2.4 GHz applications.

Jul 01, 2010

Built to handle ruggedized conditions, models W5001, W5010, and W5011 meet Bluetooth, WLAN, WiFi, IEEE 802.11b/g, ZigBee IEEE 802.15.4, and 2.4 GHz ISM band system standards. They offer IP65 water ingress protection in accordance with international standard IEC 60529, UV protection, and ability to withstand 100 mph wind loading. Measuring only 128 x 18 mm, antennas have max gain of 1.5 dBi in... Read More

Communication Systems & Equipment, Electronic Components & Devices, Materials & Material Processing

Plenum-Rated Audio Amplifier/Mixer removes random noise.

Jul 01, 2010

PlenumAmp PMA-245H features HummBuster technology to remove random noise that can enter classroom audio systems and eliminates ground loop hums caused by inadequate electrical grounds and noisy sound cards. Incorporated switches also allow flexibility in resolving ground loop issues. Ideal for above ceiling applications, dual input, 18 V, 45 W stereo amplifier/mixer measures 5.43 x 4.80 x 1.65... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals

Embedded Wireless Modem suits China Mobile TD-SCDMA network.

Jul 01, 2010

Sierra Wireless AirPrime Q2668 is dual-mode intelligent embedded module that enables data transmission at up to 2.8 Mbps on downlink and 384 Kbps on uplink. Unit operates on 1,880-1,920/2,010-2,025 MHz TD-SCDMA bands and 900/1,800 GSM/GPRS/EDGE bands, and supports USB 2.0 and RS232 interfaces. It contains embedded protocol based on China Mobile's WMMP v3.0 that allows manufacturers to rapidly... Read More

Communication Systems & Equipment

GPS-Enabled Mobile Phone suits lone workers in hazardous areas.

Jul 01, 2010

Keeping remote workers safe while in isolated and hazardous environments, Sonim XP3 Sentinel can be dropped from 2 m onto concrete, submerged in 1 m of water for up to 30 min, and operates in temperatures from -20 to +55°C. Devices meets MIL-810F certification for resistance to humidity, salt, shock, and heat. Featuring ergonomic design, unit allows users to operate with gloved or wet hands,... Read More

Communication Systems & Equipment, Non-Industrial Products

Modular Soldier System integrates advanced communications.

Jun 29, 2010

Accommodating products with open standards and interfaces, FalconFighter(TM) links C4 devices, sensors, networking components, and power modules into centralized wearable platform controlled by soldier. Core of system is RF-7800S Leader Radio, which combines tactical radio with PDA to provide advanced situational awareness and battle management tools. With future-focused design, system modules... Read More

Communication Systems & Equipment, Controls & Controllers, Safety & Security Equipment

Commercial Fire Panel offers 8 communication options.

Jun 28, 2010

Suited for range of commercial applications, DMP XR500(TM) Command Processor Panel can be used as slave fire communicator with any separate Fire Alarm Control Panel or as standalone FACP using its own built-in communicator. System can be configured with up to 8 different communication options using Network, Cell, or Dial-Up technologies. Read More

Communication Systems & Equipment

Low Noise Amplifiers suit cellular and LTE base stations.

Jun 28, 2010

Offered in 8-lead, 2.0 x 2.0 x 0.85 mm, SMT QFN packages, RoHS-compliant low noise amplifiers (LNAs) are offered in 1,500-2,300 MHz and 2,300-4,000 MHz versions for base station RF front-end design. At 1,900 MHz and typical operating condition of 5 V/51 mA, GaAs Enhancement-mode pHEMT process technology gives noise figure of 0.48 dB and third order intercept (OIP3) of 35 dBm. At 2,500 MHz and 5... Read More

Communication Systems & Equipment, Electronic Components & Devices, Sensors Monitors & Transducers, Test & Measuring Instruments

RMS Detector measures signals in 3G and 4G devices.

Jun 28, 2010

Providing power measurements of simple and complex waveforms, ADL5505 TruPwr® RF Power Detector is useful for measuring high crest factor signals, such as W-CDMA, CDMA2000, WiMAX, WLAN, and LTE waveforms. RMS output is linear-responding DC voltage with conversion gain of 1.86 V/V RMS at 900 MHz. Requiring single 2.5-3.3 V supply, detector draws less than 1.8 mA and is effective in... Read More

Communication Systems & Equipment

Conical Horn Antennas feature frequency range of 4-26.5 GHz.

Jun 25, 2010

With gain of 16-25 dBi, Series 3163 Antennas are designed for use as feeds in tapered anechoic chambers, as well as in applications requiring high gain and linear polarization. Design allows for rotation inside conical feed sections when back-mounted and attached to rotator at feed of tapered chamber. Individually calibrated at 3 m per ANSI C63.5, Series includes C-band Model 3163-03, X-band... Read More