Strain Gage Amplifiers handle multiple channels.

Strain Gage Amplifiers handle multiple channels.

MAC MultiAmplifier Card and IMUX Tension Multiplexer provide multi-point tension monitoring. MAC amplifies signals from up to 8 tension transducers or load cells, and supplies corresponding number of 0 to 10 Vdc signals. Signals may be used as inputs to drives, PLCs, or other control devices. Additional 0 to 1 mA or 0 to l00 microA signal is supplied as meter output. IMUX can select and display...

Read More »
Ethernet Hub provides networking distances up to 15 km.

Ethernet Hub provides networking distances up to 15 km.

Industrial Ethernet Series (EIS) consists of 6-port, 10/100 Mbps auto-negotiating switching hubs, with mix of four 10/100 twisted-pair copper ports and two 100 Mbps multi-mode or single-mode fiber ports. Model EIS6-100T/FC supports SC-style connectors, Model EIS6-100/FT supports ST-style connectors, and Model EIS6-100T/FCS supports SC-style connectors and single-mode fiber. Low-voltage power,...

Read More »

Feeder System eliminates tray replenishment time.

Portable TF20 Tray Feeder incorporates electronically controlled drive systems to enable feeder to safely handle thick or thin JEDEC or IEC trays. Automatic tray exchange is controlled by host machine is less than 5 sec. Trays are fed from stack to pick position and returned once devices have been programmed. Tray replenishment is achieved during machine's TAKT time.

Read More »

Wireless Transceiver avoids congestion with crowded bands.

FCC-certified WIT5811 wireless data module for OEM applications operates in license-free 5.8 GHz band. With asynchronous serial interface, it easily integrates into new and existing product designs to supply wireless communications at up to 1.23 Mbps. Incorporating frequency hopping spread spectrum technology, WIT5811 features 100 mW of transmit power and provides 900 ft range indoors, over 3,000...

Read More »
Cable Puller is designed for light to medium-duty pulls.

Cable Puller is designed for light to medium-duty pulls.

Designed for continuous pulls to 2,000 lbs, Mini Brutus(TM) uses Rigid(TM) or mini-CollinsÂ-® pipe threader as its power drive unit. Unit is capable of pulling up to 18 ft/min and includes multi-position, adjustable arm that extends over 9 ft, allowing cable pulls from any direction. Self-contained design includes collapsible, two-part, powder coated frame (44 x 13Â-½ x 18 in.); 5Â-½...

Read More »
Incremental Encoder works at speeds to 10,000 rpm.

Incremental Encoder works at speeds to 10,000 rpm.

C120 Series with 2 in. housing is available with any incremental count from 1 to 8,192 ppr. It has electrical bandwidth up to 820 kHz and firmware generated marker pulse of 90 or 180, providing feedback at speeds up to 10,000 rpm while maintaining marker width and synchronization. Encoder combines hybrid OPTO-ASIC and small, unique code disk. Both tracks are read simultaneously by sensor array...

Read More »
Locating Pin LED Holders suit high shock/vibration applications.

Locating Pin LED Holders suit high shock/vibration applications.

H-LP Series holders, suitable for single, bi-level, and tri-level T-1 (3 mm) LED display applications, are manufactured from black, 94-VO rated nylon material. They provide PCB retention and uniform elevation during processing and handling, making them suitable for industrial environments. LEDs are perfectly aligned on equally spaced centers. With bifurcated locating pin, widths from 0.170 in.,...

Read More »
Cordless Phone System works with 1 to 36 handsets.

Cordless Phone System works with 1 to 36 handsets.

Industrial Cordless(TM) EP-436 phone system operates off single 4-line base unit with handsets that also function as 2-way radios. Auto-attendant can be programmed to direct callers to specific handsets. System includes caller ID with call waiting and text-messaging between handsets or to groups of handsets. Hot-swapping feature permits changing battery while call is on hold. Digital spread...

Read More »
Cartridge Feed Systems handle highly viscous materials.

Cartridge Feed Systems handle highly viscous materials.

DispensitÂ-® Titan 200 ACO(TM) and Titan 128 transfer abrasive and/or extremely viscous materials from cartridges to any dispense valve with material pressures up to 200 psi. Titan 200 uses 20 oz cartridges and requires only plant air pressure to produce 2.0:1 material pressure power factor. Titan 128 uses 1/10 gal caulking cartridges with threaded outlets. Both can be mounted close to point...

Read More »
Optical Encoders offer servo mount abilities.

Optical Encoders offer servo mount abilities.

Absolute encoders include 20 and 58 mm dia sizes, and generate 8 and 10 bit binary code output signals, respectively. Smaller size incorporates conductive composite housing, which provides EMI shielding and protection for assembly. Larger size, intended for industrial usage, incorporates larger radial bearings and 10mm OD input shaft for increased external load capacities. Both encoders satisfy...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics