Transceiver integrates isolated power.
MILPITAS, CA - August 31, 2009 - Linear Technology Corporation introduces the LTM2881, an isolated RS485 -µModule® transceiver that guards against large ground-to-ground differentials and common mode transients. In practical RS485 systems, ground potentials vary widely from node to node, often exceeding the tolerable range, which can result in an interruption of communications or destruction...
Read More »10 GbE Controllers accelerate real-time applications.
Comprised of Solarstorm-® SFL9022 dual-port LOM, SFL9021 single-port LOM, and SFC9020 dual-port controller, SFC9000 series has fully virtualized architecture and sub-6 µsec latency. Fully integrated 10GBASE-T LAN-on-motherboard (LOM) enables backwards compatibility with 1000BASE-T Ethernet and support for installed cabling. Able to provision and manage IP flows, series also delivers 37 Gbps...
Read More »10 GbE Controllers accelerate real-time applications.
Comprised of SolarstormÃ-® SFL9022 dual-port LOM, SFL9021 single-port LOM, and SFC9020 dual-port controller, SFC9000 series has fully virtualized architecture and sub-6 õsec latency. Fully integrated 10GBASE-T LAN-on-motherboard (LOM) enables backwards compatibility with 1000BASE-T Ethernet and support for installed cabling. Able to provision and manage IP flows, series also delivers...
Read More »Corning Cable Systems to Highlight Deployment Flexibility in Preconnectorized FTTx Solutions at OSP EXPO 2009
HICKORY, N.C. - Corning Cable Systems LLC, part of Corning Incorporated's (NYSE:GLW) Telecommunications segment, will display its new, innovative preconnectorized fiber-to-the-x (FTTx) solutions through exhibits and hands-on demonstrations at the OSP EXPO 2009, Sept. 2-3 in Minneapolis. In its exhibit (booth #901), customers will get first-hand experience with the two distinct variations of...
Read More »
A Guide to Quality Control of the SMT Process
The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.
Read More »Corning Cable Systems to Highlight Deployment Flexibility in Preconnectorized FTTx Solutions at OSP EXPO 2009
HICKORY, N.C. - Corning Cable Systems LLC, part of Corning Incorporated's (NYSE:GLW) Telecommunications segment, will display its new, innovative preconnectorized fiber-to-the-x (FTTx) solutions through exhibits and hands-on demonstrations at the OSP EXPO 2009, Sept. 2-3 in Minneapolis. In its exhibit (booth #901), customers will get first-hand experience with the two distinct variations of...
Read More »Dual-Band 5 GHz Antenna has metallic die-cast enclosure.
Dual band 5 GHz antenna integrates frequency bands of 2,400-2,850 MHz 12 dBi and 4,900-5,850 MHz 16 dBi, RJ45-ECS field replaceable feed-through Ethernet connector, and UV-resistant radomes made of ASA plastic and SS hardware. Enclosure has 8 engineered knockouts that eliminate need for drilling: 7 for cable configurations and one for bulkhead connector-only configuration. It is available in...
Read More »Dual-Band 5 GHz Antenna has metallic die-cast enclosure.
Dual band 5 GHz antenna integrates frequency bands of 2,400-2,850 MHz 12 dBi and 4,900-5,850 MHz 16 dBi, RJ45-ECS field replaceable feed-through Ethernet connector, and UV-resistant radomes made of ASA plastic and SS hardware. Enclosure has 8 engineered knockouts that eliminate need for drilling: 7 for cable configurations and one for bulkhead connector-only configuration. It is available in...
Read More »
High-Speed Multiplexer allows sharing of USB host port.
Operating from single 1.8-3.3 V supply, Model ISL54222A enables 2 USB 2.0 high-speed interface transceivers to share single USB connector. Bidirectional unit features HBM ESD performance greater than 12 kV on I/O terminals and internal charge pumps that lower switch resistance and open USB eye for optimal performance at 480 Mbps. Switches rated at 5.5 W can pass USB full-speed data signals...
Read More »
High-Speed Multiplexer allows sharing of USB host port.
Operating from single 1.8-3.3 V supply, Model ISL54222A enables 2 USB 2.0 high-speed interface transceivers to share single USB connector. Bidirectional unit features HBM ESD performance greater than 12 kV on I/O terminals and internal charge pumps that lower switch resistance and open USB eye for optimal performance at 480 Mbps. Switches rated at 5.5 W can pass USB full-speed data signals...
Read More »
LXI Switch Modules meet test system requirements.
Comprised of 3 models, EX1200 Series includes 6.5-digit DMM, analog and digital I/O modules, and internal analog expansion bus. EX1200-3164 provides 16 independent multiplexers that can be reconfigured under software control to build up to single 64-channel multiplexer. EX1200-4128 is 4 x 128 crosspoint multiplexer that allows multiple resources to be shared by multiple output channels....
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
