LIN Physical Interface suits automotive applications.
Transceivers

LIN Physical Interface suits automotive applications.

Stand-alone, local interconnect network transceiver, Model TPIC1021, features ESD protection up to 17 kV IEC and 12 kV HBM. It survives ISO 7637 transients and has fault protection to handle 40 V to 40 V on LIN bus. Unit functions across LIN 2.0 specified data rate up to 20.0 kBit/sec and functions equally well at lower data rates recommended by SAE J2602. To maximize EMI, receiver's input filter...

Read More »
Gateway interfaces to over 350 devices.
Gateways

Gateway interfaces to over 350 devices.

Combining FieldServer driver library with gateway design, FieldServer FS-B3510 offers 4 serial ports and two 10/100BaseT Ethernet ports that enable connection to PC for downloading configuration changes. LonWorks port enables user to interface to multiple devices, bringing them all into common network. Utilizing over 75 protocols, FS-B3510 offers 1,000 point capacity, hot standby capability, and...

Read More »
Anti-Creep System suits vacuum or cleanroom settings.
Positioners

Anti-Creep System suits vacuum or cleanroom settings.

Utilizing rack-and-pinion design, SKF® Anti-Creep System eliminates cage creep in cross-roller precision rail guides by keeping cages permanently centered and preventing migration of cage during normal operation. As internal drop-in component, product is able to fit within design envelope of standard cross-roller systems. PEEK® material is suited for X/Y positioning applications in...

Read More »
Signal Receivers

Single-Chip GPS suits autonomous and host applications.

Targeted for use with active antenna systems, STA2056 features complete RF function, GPS base-band, ARM7TDMI® processor, and peripherals. Device embeds radio section into digital, single-chip GPS receiver, requiring no external host CPU and memory to achieve satellite tracking and position calculation. Chip also includes low phase noise VCO/PLL, IF filters, mixer, and LNA. Drawing 37 mA,...

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
Signal Receivers

PCI-Based Multiband Receiver has user-configurable FPGAs.

PCI module 7631A is 16-channel, digital receiver that features two 14-bit A/Ds with Virtex-II FPGA for direct wideband signal processing at sample rates to 105 MHz. GateFlow tool suite allows implementation of user-defined signal processing functions in gate array, and board comes with software drivers for Windows and Linux. Clock/sync bus allows synchronization of local oscillator phase,...

Read More »
Transceivers

Transceiver supports time-triggered applications.

Operating as interface between FlexRay or TTP communication controller and copper-wire physical bus, Model AS8221 provides bus and failure diagnostics and operates at baud rates up to 10 Mbit/sec. Bi-directional serial host interface sets low-power operation modes and requests diagnostic status. Output drivers are short-circuit protected against +/- supply voltage. Unit is suited for high-speed...

Read More »
STB Silicon Tuner complies with DVB-S2 specification.
Tuners

STB Silicon Tuner complies with DVB-S2 specification.

Backwards compatible with DVB-S broadcasts, STB6100 Set-Top Box (STB) silicon tuner can be used as part of DVB-S2-ready receiver. It enables manufacturers to use 32-lead package with minimal supporting components and is programmed through 2-wire serial interface. Used in combination with other coding and satellite technologies, product can increase number of standard or HDTV channels that can be...

Read More »
Portable Amplification System helps speakers in large rooms.
Electronic Amplifiers

Portable Amplification System helps speakers in large rooms.

GoSpeak! voice amplification system uses dual flat-panel NXT® technology SurfaceSound(TM) speakers to provide room-filling audio amplification. It weighs less than 5 lb, measures 9 x 13 x 3 in., and provides 40 W of amplification. For crowds exceeding 200 people, multiple units can be daisy-chained. Microphone input, stereo line input and stereo line output are provided using 1/8 mini phone...

Read More »
Modules extend DAB functionality in automotive industry.
Signal Receivers

Modules extend DAB functionality in automotive industry.

RadioScape RS201L, designed for DAB receivers in homes, offers integrated functionality through software and features CD transport control, MP3/WMA playback, and IR remote control. Measuring 44 x 110 x 15 mm, module has low-power design down to 750 mW and receives Band III and L-Band DAB, FM, and RDS. RadioScape RS200A provides entry-level module for Band III and L-Band DAB functionality in...

Read More »
Modems

USB ADSL Modem uses simplified circuit board.

With component count of less than 135 external devices, Unicorn II USB (Universal Serial Bus) ADSL (Asynchronous Digital Subscriber Loop) chip set fits on 2-layer, single-sided PCB. Chipset is comprised of ST70138 digital chip with integrated discrete multi-tone engine, USB controller, and USB physical-layer interface. It also includes MTC20174, which integrates analog front end, line driver, and...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers