Transceivers are for SONET and Ethernet applications.
Transceivers

Transceivers are for SONET and Ethernet applications.

Singlemode, Small Form-factor Pluggable Transceivers with LC interface are for SONET/SDH/ATM and Gigabit Ethernet applications in Enterprise, Telecommunications Access, and Metropolitan Area Network markets. Transceivers are internally calibrated and offer digital diagnostics for real time monitoring of electrical and optical transceiver parameters. Units are available with push-tab or bail latch...

Read More »
Computer Services

SONET/SDH Blade supports OC-3, OC-12, and OC-48.

Multi-Rate SONET/SDH Blade can be used with INTELLAPATCH 64 and INTELLAPATCH 144 switches, which remotely automate network connectivity tasks. Each blade accepts 16 hot-swappable SFP multi-mode or single-mode transceivers that can support OC-3, OC-12, and OC-48 simultaneously or independently. Units are suitable for manufacturers of optical and network components who benefit by routing optical...

Read More »
Intercoms

Communication System combines intercom and public address.

Series 7000 integrated intercom and public address system communicates emergency, evacuation, and status messages in commercial, industrial, and institutional applications. Intercom system allows complete paging and communication between phones and intercom stations, while public address system features input and output devices, mixer pre-amplifiers, and power amplifiers. Output may consist of...

Read More »
Receiver Module suits fiber-optic telecommunications market.
Signal Receivers

Receiver Module suits fiber-optic telecommunications market.

Model 40R02 40 Gbps module incorporates waveguide photodetector with integrated pre-amplifier. Sensitivities approach -15 dBm, and typical noise current density is ~20 pA/rtHz. Unit features +2 dBm optical overload, bandwidth greater than 50 GHz and provides efficient operation at 43.5, 18, 12.5, and 10.7 Gbps. At 12.5 Gbps, it offers sensitivity of -17.5 dBm. Module comes in high-speed 14-pin...

Read More »
Optical Links provide multiple channels.
Data Links

Optical Links provide multiple channels.

Multi Form Pluggables (MFPs) deliver multi-channel optical links over Single Mode (SM) fiber with reach of over 20 km. MFPs optical linking modules increase density by 60% and reduce power consumption by 60%. MEG-Array® configuration allows for easy system expansion and additional bandwidth. Modules are available in OC-3 (STM-1) 8 Channel TX/RX and OC-12 (STM-4) 8 Channel TX/RX.

Read More »
Multiplexers

Substation Multiplexor includes 10-Base T Ethernet option.

Model SB1-16 multiplexes 16 serial ports to one master port, providing ability to communicate and switch between multiple serial devices. Optically isolated, 19 in. rack mount unit includes two RS485 and fourteen RS232 ports, built-in isolated 33 or 56 k modem, and Modem Manager® technology. Equipped with multi-level password protection, product has universal design for use with any serial...

Read More »
Serial Server Ethernet-enables unused ports.
Servers

Serial Server Ethernet-enables unused ports.

Vlinx Model ESP901 Serial Server allows unused serial ports to be connected to LAN or Intranet, enabling users to monitor and program devices from remote office. Ethernet-to-serial server connects RS-232/422/485 serial devices to Ethernet LAN/WAN and operates in Direct IP Mode, Virtual COM Mode, and Paired Mode. Unit has asynchronous 9-pin serial port and 10/100 Mbps Ethernet RJ-45 connection.

Read More »
Signal Devices are suited for dangerous applications.
Signals

Signal Devices are suited for dangerous applications.

Explosion-proof lights, horns, alarms, beacons, and buzzers, suited for outdoor or harsh environments, meet specifications of EN 50014-50020 and 50028 and carry IP 55 to IP 67 protection ratings. Decibel ranges start at 90 dB for buzzers, increasing to 105 and 108 dB for horns. Flashing and rotating light beacons are equipped with rust-proof, wire protective cages, and signal towers are...

Read More »
Encoders

Optical Encoder suits dynamometer applications.

Suited for company's non-contact, infrared rotary torque sensor line, 1024 optical encoder provides accurate means of measuring torque and angle in dynamometer applications. Sensor includes digital infrared transmission system, which provides immunity to noise sources such as eddy current brakes or AC motors. It also offers analog output to represent torque load, and is designed as drop-in...

Read More »
Structured Wiring Products suit small office applications.
Electronic Hubs

Structured Wiring Products suit small office applications.

Products manage delivery of voice, data, audio, and video functions to any selected area. Offerings include network enclosures; networking, distribution, and splitter hubs for phone and fax lines; cable, satellite, and antenna TV programming; computer, electronic file, printer, and Internet access; and video/audio content from VCRs, CDs, DVDs, and stereo receivers. Networking hubs include...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics