Fume and Dust Collector controls cutting emissions.

Fume and Dust Collector controls cutting emissions.

Gold Series(R) Package controls, filters, and automatic reverse pulse cleaning system. Fan delivers 1,000 cfm at 16 in. wg pressure. Gold Cone(TM) cartridge, with 50% more media area than conventional cartridges, uses 2 stages of filtration to remove fine dust and fume particles generated during laser and plasma cutting. Filtering element provides 99.999% removal efficiency on 0.5 micron...

Read More »
Oil Mist Collector has self-contained, single unit design.

Oil Mist Collector has self-contained, single unit design.

Compact Oil Mist Collector collects and removes airborne oil mist, smoke, and submicron vapors generated by production machining and cold forming. Capacities range from 500 to 1,000 cfm. Unit can be floor, truss, or machine mounted . Multiple stage collector is capable of exceeding 99% efficiency and provides continuous draining during operation. Air flow to filter media ratio is held low to...

Read More »
Portable Collector provides 382 sq ft of media.

Portable Collector provides 382 sq ft of media.

Rated at 1000 CFM, PortaAir(TM) has 1 1/2 HP motor and backward inclined fan that generates high suction at intake hood, even with dirty filters. Unit collects airborne contaminants with integral 11 ft, 8 in. dia, 360 deg rotating, externally supported arm, and deposits it in 2 pleated cartridge filters rated at 99.8% efficiency. Collector has 16 ga welded galvanized steel body; two 8 in....

Read More »
Vacuum offers 99.997% filtration efficiency.

Vacuum offers 99.997% filtration efficiency.

P300 portable dust extraction unit has manual reverse pulse filter cleaning system with filter life of 6,000 to 8,000 hr. It includes automatic start/stop for pneumatic tools, noise reducer, adjustable handle, and 4 wheels. Unit operates on 110 to 120 V and is suitable for cleaning workshops, on-tool extraction of grinding and sanding dust, and on-torch welding fume extraction.

Read More »
A Guide to Quality Control of the SMT Process
Sponsored

A Guide to Quality Control of the SMT Process

The printed circuit board (PCB) manufacturing process begins with cutting-edge equipment capable of accurately picking and placing up to 40,000 components per hour. This innovative equipment keeps error rates extremely low, and those defects that do occur are quickly caught by sensitive laser and optical inspection equipment.

Read More »
Dust Collector keeps personnel out.

Dust Collector keeps personnel out.

Modu-Kleen(R) downdraft dust collector contains fugitive dust. Air enters at top of collector housing and flows downward to cartridge filters, improving filtering process and material-to-air ratio. Cartridge filters are horizontal, requiring little floor space and making filter removal easier. Personnel never have to enter filter housing for maintenance or cartridge filter removal. Large door...

Read More »
Dust Collector meets workplace air specs.

Dust Collector meets workplace air specs.

Gold Series(R) line of cartridge dust and fume collectors use Poly-Tech(TM) silicone-impregnated polyester/cellulose media. Collectors meet or exceed 5 mg/cu m emissions threshold on non-hazardous dusts required to recirculate air back into workplace. They are suitable for removal of all types of fine, dry dusts. Optional 99.99% efficient version removes 0.5 micron and larger particles for more...

Read More »
Dust Collector suits low headroom installations.

Dust Collector suits low headroom installations.

Side Winder Model DKCD 72030 is a 30 HP, 7,500 CFM dust collector featuring side mounted fan and flat envelope-shaped filters. It is only 122 in. tall, and typically used for collection of wood dust from maintenance shops and removal of powders caused by mixing or blending. Dust is collected in four 55-gal drums. Unit can be installed outdoors or indoors if local fire codes permit.

Read More »
Dust Collector allows continuous production.

Dust Collector allows continuous production.

Whirl/Wet Dust Collection System has radiused welds so that material cannot accumulate in unit. Its 100% polypropylene construction makes it highly resistant to mechanical damage. System is available in capacities from 500 to 50,000 cfm, and suitable for applications that generate dusts larger than 2 microns. It is self-cleaning and functions without pumps or internal moving parts. PLC monitors...

Read More »
Dust Collector occupies 10 sq ft of shop space.

Dust Collector occupies 10 sq ft of shop space.

Model 2.3x3S/D multi-function smoke and dust collector collects smoke from welding operation, converts to downdraft bench for finishing operations, and can be fitted with duct wye and blast gate to collect dust from metalworking operations. Its 3 hp blower moves 1,500 CFM of air. Collector also offers high-efficiency permanent fabric filter and removable dust pan. Options include activated carbon...

Read More »
Mist and Smoke Eliminator is rated at 1250 CFM.

Mist and Smoke Eliminator is rated at 1250 CFM.

MistBuster II utilizes 3-stage filtration process to eliminate mist and smoke from airstreams. Mechanical mist impingers capture larger mist droplets, electrostatic precipitator (ESP) provides intense electrical charge on remaining contaminates, and aluminum post-filter entraps particles that may have been agglomerated on cell plates. MistBuster runs at noise levels rated to 70dBA @ 6 feet on...

Read More »

All Topics