Shaft Locking Devices can be tensioned in minutes.
Shaft Collars

Shaft Locking Devices can be tensioned in minutes.

Available in hydraulic and mechanical models for wind turbines, Ameriloc Shaft Locking Devices offer torque range up to 4,425,372 lb-ft. With larger diameters, such as 20.8 in., HLD versions can be tensioned within minutes, compared to several hours required for mechanical devices. MLD models eliminate need for keyways or splines, provide unlimited shaft positioning, and feature zero backlash....

Read More »
Hinged Shaft Collars are custom made to OEM requirements.
Shaft Collars

Hinged Shaft Collars are custom made to OEM requirements.

Featuring triple-link hinge and captive clamping screw, Custom Hinged Collars can be manufactured from aluminum, brass, bronze, steel, stainless steel, titanium, and other alloys. Typical modifications include square, hex, contoured, and threaded bores; OD and face treatments, such as wrench flats and spanner wrench holes; and swing-away clamping handles. These hinged shaft and pipe clamping...

Read More »
Plastic Hinged Collars offer alternative to stainless steel.
Shaft Collars

Plastic Hinged Collars offer alternative to stainless steel.

Offered in 7/8, 1, and 1Â-¼ in. ID sizes, Plastic Hinged Collars feature integral hinge with stainless steel clamping screw and one flat section with hole for mounting or attaching other components. Corrosion-resistant, injection molded collars are suitable for holding hose or tubing on surface or for mounting onto tube, rail, or pipe and attaching other parts. Black, white, and custom...

Read More »
Paintable Steel Shaft Collars allow for OEM color matching.
Shaft Collars

Paintable Steel Shaft Collars allow for OEM color matching.

Paintable Shaft Collars are machined from steel and phosphate coated, allowing them to be painted, which permits complete machinery and equipment color matching. They are offered in 1- and 2-piece clamp-type styles in over 30 standard sizes from 1/8-6 in. ID and in specials up to 16 in. ID. Available with round, square, and threaded bores, collars can be customized with face and OD treatments...

Read More »
Mounting Collars simplify machinery building.
Shaft Collars

Mounting Collars simplify machinery building.

Accu-Flange(TM) Collars feature square integral flange with drilled and tapped through-holes and clamp-type collar for attaching shafts or tubing to flat surface. Available with Â-½-1½ in. bores machined from stainless steel, steel, and aluminum, units are supplied with keyway and 6 through-holes. Collars will maintain perpendicularity and not mar shafts or crush tubing of machines....

Read More »
Threaded Shaft Collars feature bore sizes up to 16 in. I.D.
Shaft Collars

Threaded Shaft Collars feature bore sizes up to 16 in. I.D.

Machined from steel and stainless steel in 1-piece, 2-piece, and hinged styles, Large Threaded Shaft Collars can be single point threaded to customer requirements with bearing-, ACME-, stub ACME-, UNC/UNF-, and multi-start threads. Units can also be customized with spanner wrench slots, face holes, and other special requirements. Supplied in quantities from one to production volumes, collars are...

Read More »
Medical IV Pole Mounting Collars reduce wire clutter.
Shaft Collars

Medical IV Pole Mounting Collars reduce wire clutter.

Suited for attaching instruments and devices, such as power outlet strips, to medical IV poles, stainless steel mounting collars reduce wire clutter by allowing use of single cord to simplify transportability. Designed with flat mating side, each collar is fully adjustable and only 2 collars are required to securely attach power strip. Collar comes in sizes to fit IV poles made from Â-¾ in....

Read More »
Heavy-Duty Steel Collars can mount to pipes or flat surfaces.
Shaft Collars

Heavy-Duty Steel Collars can mount to pipes or flat surfaces.

Slotted to accept flat plate or screws for attachment to pipe and various flat surfaces, Heavy-Duty Mounting Collars come in 3 configurations; one with slot on bottom, perpendicular to shaft and one with slot parallel to shaft, both of which accept Â-¼ in. plate, and third one with mounting flat and ½ in.-13 hole that is counterbored to maintain smooth bore. Machined from steel,...

Read More »
Steel Shaft Collars are surface prepared for painting.
Shaft Collars

Steel Shaft Collars are surface prepared for painting.

Machined from steel in one- and two-piece clamp-type styles, Paintable Shaft Collars are phosphate coated, along with their clamp screws, to let OEMs paint them for exact color brand matching. Collars are available in sizes from 1/8 to 16 in. ID with round, square and threaded bores for attachment to structural tubing and shafts. Suited for commercial and military applications, units can also be...

Read More »
Collars and Couplings Withstand Water and Harsh Chemicals
Shaft Couplings

Collars and Couplings Withstand Water and Harsh Chemicals

A full line of shaft collars and couplings for pump drive and structural systems in water treatment, pollution control, and similar facilities is available from Stafford Manufacturing Corp. of Wilmington, Massachusetts. Stafford Corrosion-Resistant Collars and Couplings are offered in 303 and 316 stainless steel, brass, bronze, and other materials for various power transmission and structural...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers