General Coating Services

Specialty Coating Systems Announces New Adhesion Promotion Technology

August 28, 2008 - Indianapolis, Indiana - Specialty Coating Systems (SCS) is pleased to announce a new adhesion promotion technology, AdPro Plus(TM), specifically developed to improve adhesion of Parylene conformal coatings to various substrates. Developed by SCS' industry-leading team of research and development engineers, AdPro Plus increases adhesion between Parylene coatings and various...

Read More »
Thin-Film Coating Services

CVD Film extends gap-fill technology to 32 nm and beyond.

Extending HARP SACVD® gap-fill technology for critical STI2 device structures to 32 nm and beyond, Applied Producer® eHARP(TM) system delivers void-free films to fill less than 30 nm, greater than 12:1 aspect ratio features. High-density, strain-inducing films enable scaling of conventional planar and emerging 3D device structures. Virtually carbon-free, eHARP film requires no...

Read More »
Electroforming Cold Shields with Laser Black for High Performance
Shielding

Electroforming Cold Shields with Laser Black for High Performance

Epner Technology is a leading plating and coating service. Precious metal plating and gold plating to NIST reflectance standards is Epner's specialty. With over 90 years of electro and electroless plating experience Epner announces expanded capabilities to also include electroforming of cold shields. Thin wall Cold Shields use ETI's electroforming Laser Black and Laser Gold's performance to...

Read More »
Gold Lining optimizes IR lightpipe and waveguide reflectance.
Coatings

Gold Lining optimizes IR lightpipe and waveguide reflectance.

Laser Gold coatings, used as lining of IR Lightpipes and Waveguides, promote optimal IR reflectivity, which is essentially flat from 1-12 micron. Reflectivity levels, exceeding 99%, have been recorded above 1.5 micron for durable, cleanable surfaces from 0.01-100 micron thick. Lightpipes with IR coatings are custom built, straight and curved, with polished bores. Diameters range from under 1 mm...

Read More »
ZC&R Coatings for Optics and Abrisa Industrial Glass Partner to Produce Display Glass Solutions
Coatings

ZC&R Coatings for Optics and Abrisa Industrial Glass Partner to Produce Display Glass Solutions

February 20, 2008 - Torrance, CA - ZC&R Coatings for Optics, Inc. and Abrisa Industrial Glass, Inc. join to produce display glass, LCD glass plates, overlay and bus bar printing production solutions for a wide variety of glass substrates. Precision coated indium tin oxide (ITO) and index-matched ITO (IMITO) transparent thin films from ZC&R offer high transmittance and low resistance. Installed in...

Read More »
Light Emitting Diodes (LED)

Veeco MOCVD Tools Selected for ROY HB-LED Capacity Expansion at Xiamen Sanan OptoElectronics in China

WOODBURY, N.Y--Nov. 1, 2007--Veeco Instruments Inc. (Nasdaq: VECO), announced today that two recently purchased TurboDisc® E450(TM) As/P Metal Organic Chemical Vapor Deposition (MOCVD) Systems are being used by Xiamen Sanan OptoElectronics of Xiamen, China to expand their capacity of red, yellow and orange (ROY) high brightness light emitting diodes (HB-LEDs). Mr. Kechuang Lin, General...

Read More »
Miscellaneous Software

Announcement of Complementary LIEKKI(TM) Service Offerings

Lohja, Finland, September 17, 2007 - LIEKKI Corporation, a leading supplier of highly doped fibers and optical engine modules for fiber laser and amplifier applications, today announced its broad range of complementary LIEKKI(TM) services In addition to its industry leading high power fibers, optical engines and design software, LIEKKI is offering a broad range of complementary services to...

Read More »
Thin-Film Coating Services

Veeco Introduces PV-Series Thermal Deposition Sources for CIGS Thin Film Solar Manufacturing

WOODBURY, N.Y--Aug. 23, 2007--Veeco Instruments Inc. (Nasdaq:VECO) has introduced a line of new production-scale PV-Series(TM) Thermal Deposition Sources, enabling copper indium gallium selenide (CIGS) thin film solar manufacturers to more quickly transition from pilot to full scale solar cell production. Veeco's new line of thermal deposition sources for CIGS includes PV-Series SUMO(R) (for...

Read More »
Miscellaneous Stackers

Small Motor Stack and Coat Service Permits Smoother and Tighter Wire-Winding

A stacking, laminating and coating service for small motors, stators and gyroscopes that permits smoother, more densely populated wire-winding is being offered by Applied Plastics Co., Inc. of Norwood, Massachusetts. Applied Plastics' Stacking, Laminating, and Coating Service holds lamination alignment to within ±0.0005" and includes deburring and selective coating from 0.002" to 0.005" thick...

Read More »
Motor Stator Stacking Service applies blue epoxy coating.
Coating Services

Motor Stator Stacking Service applies blue epoxy coating.

Developed for motors, stators, and gyroscopes, Stacking and Coating Service holds lamination alignment to within ±0.0005 in. and includes deburring and application of blue epoxy coating from 0.002-0.005 in. thick in one pass. Suited for laminations from 3/8-8 in. OD, smooth finished parts offer electrical resistance up to 1,000 V/mil and help prevent wire cuts and shorts. Metal laminations,...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers