Coating Equipment

Coating Equipment

Dörken MKS Systems Showcases New Innovations to Worldwide Visitors During Dörken Days

Visitors from the entire supply chain, (OEMs, parts manufactures and coaters) were updated on the new generation of electroplating systems and ways to produce permanent black surfaces with high corrosion resistance and optimized thread-fastening products. Grass Lake, MI РD̦rken MKS Systems, the parent company of D̦rken Corporation USA welcomed 230 visitors from four continents and 25...

Read More »
Wall Colmonoy's Turnkey Approach to Roller Coating and Screen Printing
Coating Equipment

Wall Colmonoy's Turnkey Approach to Roller Coating and Screen Printing

Wall Colmonoy is pleased to announce its turnkey solution to Roller Coating and Screen Printing.Â-  From paste selection to equipment to expert technical support, Wall Colmonoy offers a complete turnkey solution. Wall Colmonoy's RD Department works directly with customers to develop the right customized paste, a blend of Nicrobraz® brazing filler metal powders mixed with a S' Binder™...

Read More »
Ace Metal Finishing Successfully Powder Coats Large, 14 Foot Tanks
Material Handling Equipment

Ace Metal Finishing Successfully Powder Coats Large, 14 Foot Tanks

Ace Metal Finishing is pleased to announce the successful completion of a powder coating job of large tanks to be used in Industrial Parts Washing.Â-  These 500 pound formed and welded tanks measured 14 feet long, 4 feet wide, and 8 feet high. When the customer approached Ace about the job they were searching for a solution to their problem.  They needed eight very large tanks all...

Read More »
New Pilot Coating Line R&D, Test & Short Runs
Laminators

New Pilot Coating Line R&D, Test & Short Runs

Hawthorne, New Jersey - Radiant Energy Systems, Inc. has recently added a second pilot line to its research and development laboratory. This new pilot coating line is designed for laminating webs such as nonwovens using powder or web adhesives. Webs run on this line include films, nonwovens and fabrics. The line consists of an unwind roll for the primary substrate, a powder adhesive spreader, a...

Read More »
Coating Equipment

Electrolube's UV Cure Conformal Coating Receives IPC Standard

The internationally renowned IPC standard for conformal coatings, IPC-CC-830, has been presented to Electrolube’s UV Cure conformal coating, UVCL. The new coating, designed for high volume users in fields such as automotive and consumer electronics, qualified for the industry standard following stringent tests to establish quality conformance requirements for electrical insulating compounds....

Read More »
Food Safety and Clean Label Enhanced by New Ultrasonic Spray Coater
Coating Equipment

Food Safety and Clean Label Enhanced by New Ultrasonic Spray Coater

MILTON, N.Y.Â- – Sono-Tek Corporation (OTCQB: SOTK) announces the recent sale of three ultrasonic spray coating systems for anti-microbial applications to a USA based processed meat manufacturer. Recent outbreaks of food borne diseases in developed countries around the world resulted in numerous deaths and hospitalizations. Manufacturers of food products and supermarket chains had to...

Read More »
Coating Equipment

Advenira Enterprises Inc. Receives Key Patent and Selected to Present at SEMICON/West Silicon Innovation Forum

Next generation Nano-composite coating enabling critical process equipment to lower costs and meet next-generation scaling requirements SUNNYVALE, Calif. -- Advenira Enterprises Inc., a developer of Solution Derived Nano-composite (SDN™) coating technology, today announced it has received notice from the United States Patent and Trademark office of issuance of patent US 8,507,035. This is the...

Read More »
Two Finishing Options Now Available for Oil and Gas Drilling Components - MicroLok And TRU TEMP Provide Efficient Corrosion Protection
Miscellaneous Compounds

Two Finishing Options Now Available for Oil and Gas Drilling Components - MicroLok And TRU TEMP Provide Efficient Corrosion Protection

Eden Prairie, Minnesota – Birchwood Technologies now provides two finishing options for oil and gas drilling components - MICROLOK® AO and TRU TEMP®. Both finishes provide robust corrosion protection using a safe, low temperature, environmentally friendly process. With U.S. oil and gas production at its highest level in 20 years, the need for finishing components used in the...

Read More »
Black Oxide Finishing Systems support lean manufacturing.
Coating Equipment

Black Oxide Finishing Systems support lean manufacturing.

Featuring 40 and 100 gal tank capacity, respectively, BC40Â- and BC100 TRU TEMP™ Pre-Engineered Systems utilize 7 tanks, are constructed of 10 gauge welded steel or welded polypropylene, and are supplied with all heaters and plumbing connections. Processing lines form .000020 in. thick black magnetite finish in 10–12 minutes. Offering substitute for dangerous...

Read More »
Davis-Standard to Feature High-Value Innovations for Extrusion Coating, Cast Film, and Medical Tubing at K2013
Coating Equipment

Davis-Standard to Feature High-Value Innovations for Extrusion Coating, Cast Film, and Medical Tubing at K2013

Pawcatuck, Conn. – Davis-Standard, a recognized global leader in high-performance converting and extrusion systems, will feature its recently-introduced dsX™ technology in Hall 16, booth #A43 during K 2013, October 16 – 23, including the high-value, pre-engineered dsX flex-pack™ extrusion coating line, the new ultra-compact dsX med-tube™ medical tubing system, and the unveiling of the...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers