Clock Generators

Clock Generators

Clock and Data Recovery Device suits SONET/SDH applications.

Housed in 20-pin TSSOP package, Model XRT91L33 operates at 166/622 Mbps SONET/SDH data rates. Single-channel OC-3/-12 Clock and Data Recovery Device can generate all clocks from 19 MHz crystal oscillator, as well as detect and generate various alarms and status outputs to provide immediate alerts and complete fault coverage. On-chip power regulation provides noise and crosstalk immunity to...

Read More »
Clock Generators

Dual-Output Clock Generator targets Ethernet applications.

Achieving -57 dB PSNR to minimize jitter degradation in noisy power-supply environments, MAX3622 utilizes low-noise VCO and PLL architecture to generate two 0.14 psRMS clock outputs from 25 MHz crystal resonator. It integrates LVPECL and LVCMOS buffers to provide 125 MHz LVCMOS and 156.25 MHz LVPECL output frequencies simultaneously. Specified over 0-70°C commercial temperature range, unit...

Read More »
Clock Generators

Clock Multiplier IC provides any-rate frequency synthesis.

Capable of generating any output frequency from crystal/reference clock input with 0.3 picosec jitter generation, Model Si5319 Any-Rate Precision Clock is suited for high performance timing applications. It accepts any frequency from 2 kHz to 710 MHz and generates any frequency from 2 kHz to 945 MHz and select frequencies to 1.4 GHz. Supporting free-run mode of operation, IC is available in 6 x 6...

Read More »
Clock Generators

Dual Output Clock Generator suits high-speed equipment.

Utilizing low-noise VCO and PLL architecture, Model MAX3674 generates 5 ps RMS jitter output up to 1,360 MHz from low-frequency reference clock provided by on-board crystal oscillator or external LVCMOS clock. Unit provides 2 differential LVPECL outputs for same or different frequencies. IÂ-²C-compatible interface enables fine-tuning of output frequency for frequency-margining testing....

Read More »
Clock Generator exhibits low jitter in broadcast equipment.
Clock Generators

Clock Generator exhibits low jitter in broadcast equipment.

Available in 5 x 5 mm 32-pin LLP® package, Model LMH1982 clock generator with genlock delivers HD clock output jitter of 40 ps peak-to-peak, and offers reference clocks for video ADCs, DACs, and FPGA transceivers. It provides 2 LVDS output clocks with selectable frequencies for SD (27 or 67.5 MHz) and HD (74.25, 74.25/1.001, 148.5, or 148.5/1.001 MHz) resolutions. Unit operates from 3.3 and...

Read More »
Clock Generators

Clock Generators suit telecom and networking applications.

Employing 0.25 micron CMOS technology, 3.3 V PureEdge(TM) PLL-based Models NB3N3002 and NB3N5573 create selectable Host Clock Signal Levels and sub-picosecond jitter quality clocks at 25, 100, 125, and 200 MHz. Model NB3N3002 generates 1 differential HCSL output clock, while Model NB3N5573 delivers dual output. Housed in 5.0 x 4.4 mm TSSOP-16 package, devices provide phase noise of -130 dBc/Hz at...

Read More »
Clock Generators

Clock Generators range from 1-4 phase-lock loops.

With low jitter at 60 psec, CDCE9xx and CDCEL9xx family of clock generators generate up to 9 output clock sources from single input frequency. Each output can be programmed in-system for any clock frequency up to 230 MHz. CDCE9xx offers 2.5 or 3.3 V outputs and CDCEL9xx offers 1.8 V outputs, enabling low-power capability needed for portable devices. Products provide programmability options...

Read More »
Clock Generators

Clock Generators feature low jitter of 60 ps.

Ranging from 1-4 phase-lock loops, Series CDCE9xx provides 2.5 or 3.3 V outputs, while Series CDCEL9xx provides 1.8 V outputs. Each PLL supports spread-spectrum clocking to minimize EMI, enabling compliance with EMC regulations. Units can generate up to 9 output clock sources from single input frequency, and each output can be programmed in-system for any clock frequency up to 230 MHz. Users can...

Read More »
Clock Generators

Clock Generator exhibits output jitter as low as 380 femtosec.

Offered in die form to fit in 5 x 7 mm XO package or 24-pin QFN package, Model CDCE421 operates from single 3.3 V supply in temperature range of -40 to +85°C. XO circuitry with integrated frequency synthesizer supports output frequency range from 10.9-766.7 MHz and from 875.2-1,175 MHz. Other key features include support for crystal or LVCMOS frequencies between 27.35-38.33 MHz, and LVDS...

Read More »
Clock Generators

Clock Generator produces under 0.3 psec of phase jitter.

Supplied in Pb-free TSSOP-8 packages, PureEdge(TM) NB3N3001 and NB3N3011 respectively create LVPECL, sub-picosecond jitter quality clocks at 106.25/212.5 MHZ and 100/106.25 MHz, which promotes timing accuracy and design flexibility for telecom and networking applications. Both PLL-based devices are 3.3 V clock generators with LVPECL differential outputs. They employ 0.25 micron CMOS technology...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics