Bin Clip Accessory safely hangs containers during transport.
Miscellaneous Clips

Bin Clip Accessory safely hangs containers during transport.

Bin Retainer Clip prevents AkroBins® and ProHANGER® storage containers of any size from falling off louvered panels and louvered rack systems of work trucks/vans while in transit. Clip is made of engineering-grade plastic and does not require complex installation or permanent adherence to surfaces. It can be removed, replaced, and reused without damage to bins or panels and suits...

Read More »
PC Clip secures 17-19 mm dia Lithium-Ion batteries.
Battery Holders

PC Clip secures 17-19 mm dia Lithium-Ion batteries.

Engineered to withstand recharging cycles, in addition to shock and vibration, Catalog No. 54 PC Battery Clip features 3-legged, THM design for low-profile placement into dense PC boards. Thru-hole unit not only holds 3.7 V rechargeable batteries, but will also accommodate A, 2/3A, 17335, 17450, 17500, 17650, 18500, and 18650 size cells. Manufactured from .012 in. thick spring steel with Tin...

Read More »
Retainers

3M Retainer Clip for CompactFlash Provides Reliable Retention of Memory Cards

Product will be on display April 26-29 at the Embedded Systems Conference Embedded Systems Conference, SAN JOSE, Calif. - April 26, 2010 - A new solution from the 3M Electronic Solutions Division provides reliable retention of CompactFlash Type I (CF I) and Type II (CF II) removable memory cards mated with 3M CF II card headers, helping to prevent the card from backing out, which can result in...

Read More »
Electrical Box Attachment aids installations between studs.
Fastening Systems

Electrical Box Attachment aids installations between studs.

With CADDY® GLIDER, installers can attach one or more electrical boxes to Telescopic Screw Gun Bracket. Once attached, installer can adjust box location and width of bracket between studs. Up to 3 boxes can be installed in standard 16 in. spacing. CADDY Glider is suitable for variety of applications, especially prefab where some assembly is done off-site prior to final installation.

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Surface Mounting AA Battery Clip features 2 SMD leads.
Battery Holders

Surface Mounting AA Battery Clip features 2 SMD leads.

Model P/N BK-53 uses 2 spring arms to capture and hold AA battery in place. SMD leads help in soldering to pcb, and each lead has solder hole that allows solder paste to wick up to terminal for additional joint strength. Nickel plated clip is constructed of phosphor bronze. Using two spring arms to capture and hold AA battery in place, Model P/N BK-53

Read More »
Ruggedized Lithium Coin Cell Holders have low-profile design.
Battery Holders

Ruggedized Lithium Coin Cell Holders have low-profile design.

Low Profile Lithium Coin Cell Holders securely retain No. 2450 Lithium Coin Cells under shock and vibration conditions in high-density PCB applications. Featuring dual-spring contacts, polarized products may be used with most vacuum and mechanical pick-and-place assemblies. Parts are manufactured with .008 in. thick phosphor bronze and gold plate over glass-filled LCP base, rated UL 94V-0.

Read More »
Miniature Fuse/Clip Assembly simplifies PCB fuse replacement.
Electrical Fuses

Miniature Fuse/Clip Assembly simplifies PCB fuse replacement.

Intended for over-current protection of PCBs, 160 Series 250 V time-lag, SMT fuse/clip assembly offers current ratings from 500 mA to 5 A, with maximum inrush current withstand of 127 A²s and interrupting rating of 50 A at 250 Vac. Unit measures 10.90 x 4.80 x 4.80 mm, and fuse clip holder prevents fuse from opening during momentary overloads. Assembly is RoHS compliant, halogen-free, and...

Read More »
DIN Rail Clip helps route wire and cables.
Miscellaneous Clips

DIN Rail Clip helps route wire and cables.

Accommodating up to 4 wire handling accessory fasteners which mount into 3/16 in. dia holes on clip, Din Rail Clip snaps onto DIN rail and is easily removable to allow reconfiguration of wiring. It can be used in conjunction with wide variety of wire/ cable clips that can mount in 3/16 dia hole and 1/16 in. panel. Clip is molded of nylon 6/6 which offers electrical insulation and is UL rated...

Read More »
Laboratory Equipment

Safe & Money-Saving Dosing Solution Replaces Weighing Paper

METTLER TOLEDO, a leading global manufacturer of precision instruments, has developed ErgoClips - a range of innovative accessories for its Excellence line of balances - which are used to secure various reaction vessels. They allow you to weigh samples in tare containers themselves, making the traditional process of using weighing paper superfluous. ErgoClips minimize sample waste and increase...

Read More »
Innovative Fixture Mount Stabilizer Clip Helps Level Signage for a More Professional Installation
Miscellaneous Clips

Innovative Fixture Mount Stabilizer Clip Helps Level Signage for a More Professional Installation

SOLON, Ohio, USA, July 2009 - The FMSBC1 Fixture Mount Stabilizer Clip, part of the CADDY® line of fixings, fasteners and supports from ERICO®, helps create a more professional appearance by effectively leveling signage or security cameras and securing ceiling tiles that have lifted during the installation of signage. This unique clip requires no tools for installation and is ideal for use...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers