Applicator / Finishing / Cleaning Brushes

Seginus Inc. is Pleased to Introduce the EHRP607965 Carbon Brush

The EHRP607965 Carbon Brush is eligible for installation on ATR aircraft DC Starter-Generators. The Starter-Generator Assembly houses eight (8) brushes. Brushes are eligible for installation on Thales Avionics Electrical Systems DC Starter-Generator, p/n 8260-121,-123 Model Eligibility: ATR42-200, ATR42-300, ATR42-320, ATR42-500, ATR72-101, ATR72-102, ATR72-201, ATR72-202, ATR72-212, ATR72-212A...

Read More »
Drum Top Vacuum is intended for large capacity collection.
Cleaning Equipment

Drum Top Vacuum is intended for large capacity collection.

Suited for bulk hazmat recovery, spill cleanup, and general plant maintenance, VHS 255 converts any- 30 or 55 gal drum into large-capacity, industrial-strength vacuum cleaner. Dry, wet, or wet/dry configurations are available. Operating from 110–120 V, 60 Hz, single-phase supply, product offers 70 in. H2O max waterlift capacity and 99 cfm max airflow capacity. Main filter area is 3.29...

Read More »
Heaters

Seginus Inc. is Pleased to Introduce FAA PMA Approved Replacement Parts for Hamilton Sundstrand Propeller De-Ice Brush Block Assemblies

The Seginus Inc. Teflon pad EH789285-1 and carbon brush EH738466-6 are applicable for installation on Hamilton Sundstrand 782689-X de-ice brush blocks. The 782689-X brush block is installed on various aircraft. Model Eligibility: DHC-8-100, -200, -300 ATR 42, ATR 72 CL215T, CL415 XIAN Y7-200A For more specific model eligibility details, please see the supplements section of our website. For sales...

Read More »
Bearings

Seginus Inc. is Pleased to Introduce EH400SG1052-13, EH250SG1052-B, EH150SG1052-B, EHST102-2 Bearings and EHMB57A-902-1, EHMB56C-902-1, EHMB56C-902-6, EH26501123-1, EH26501123, EH35-2-3001, EH40-9-3004, EH420A21, and EH420A20 Brushes

The Bearings and Brushes are eligible for installation on various aircraft and rotorcraft components manufactured by Electromech Technologies, Hawker Beechcraft, TRW Aeronautical Systems/Lucas Aerospace, Advanced Industries, Inc., Aerospace Systems Components, Inc. and Dynamic Air Engineering, Inc., Inc. i.e., Centrifugal Blower Assemblies, Vane Axial Blower Assemblies, Compressor Drive Motors,...

Read More »
A Guide to Tank Cleaning Automation
Sponsored

A Guide to Tank Cleaning Automation

This document presents a guide to Automation of Tank Cleaning, and addresses issues including the cleaning criteria, an understanding of the available options and possible solutions, and the process of final product selection. The Manual method and the Fill and Drain method of tank cleaning are listed, and the steps in establishing cleaning Objectives are outlined. Spray technology fundamentals including Flow design, Flow rate, Spray pattern, Spray coverage, Shadowing, Spray distance, Spray impact, and Cycle time. Automated tank wash products such as Clean-In-Place (CIP) Nozzles/Systems and CIP or Portable Motorized and Fluid-Driven (Turbine) Tank Washers are described in detail. Highlighting the advantages of automated tank cleaning systems, this document states the need for maintenance and safety considerations along with validation of cleaning process. A checklist for the selection of right automated tank cleaning solution and calculation of payback in terms of investment in automation is also presented.

Read More »
Bearings

Seginus Inc. is Pleased to Introduce EH03-6010-14 Bearing and EHMB56J-902-1, EH23079-1281, EH30300-1413, EH30300-1284, EH30300-1285, EH23080-1903, EH23033-1141, EH23088-1321, EH30300-1286, EH30010-1026, EH303000-1414, EH23080-1902 Brushes

Seginus Inc. is pleased to introduce EH03-6010-14 Bearing and EHMB56J-902-1, EH23079-1281, EH30300-1413, EH30300-1284, EH30300-1285, EH23080-1903, EH23033-1141, EH23088-1321, EH30300-1286, EH30010-1026, EH303000-1414, EH23080-1902 Brushes. The Bearings and Brushes are eligible for installation on various aircraft and rotorcraft components manufactured by TRW Aeronautical Systems/Lucas Aerospace,...

Read More »
Ride-On Floor Scrubbers clean up to 75,347 ft
Scrubbers

Ride-On Floor Scrubbers clean up to 75,347 ft

Respectively, BD 40/66 and BR 40/66 are heavy-duty, ride-on scrubbers with disk-shaped and cylindrical designs. In addition to 62 gal solution tanks, features for both models include 66 gal recovery tanks, 40 in. cleaning widths, and 51 in. wide squeegees. This feature set enables said machines to clean floors at rates up to 75,347 ft-²/hr. Also included, automatic mode starts all necessary...

Read More »
Cleaning Equipment

Vortox Air Technology's Oil Bath Air Cleaners Excel As Precleaners

Claremont, CA — Vortox Air Technology, Inc., an American manufacturer of innovative solutions to many industries' air filtration needs, reminds consumers that its oil bath air cleaners make excellent precleaners when used in conjunction with another air cleaner. With an oil bath air cleaner as a first line of defense, followed by a second air cleaner—usually a dry air cleaner—engines...

Read More »
Snow Pusher Attachment reduces overhead hand shoveling.
Removers

Snow Pusher Attachment reduces overhead hand shoveling.

Conserving time by reducing hand shoveling when clearing snow from overhead doors or buildings, pull-back kits are available for 24-Series Snow Pushers. Pull-back- lets operators rotate snow pusher forward in order to engage rubber edge with ground and pull snow away. Bolt-on installation using existing holes on end plates negates need for any additional drilling.

Read More »
Cleaning Equipment

Specially Formulated Cleaners for Tanks, Instruments, Labware, Mixers and Membranes

Burlington, New Jersey, USA –- International Products Corporation (IPC) has a full line of powerful cleaning products ideal for use in the pharmaceutical, medical device, laboratory, food and beverage, cosmetic, water recycling, wastewater, textile and chemical industries. IPC's free rinsing, precision cleaners are effective in a wide variety of cleaning applications. Highly concentrated;...

Read More »
Reinforced Squeegees suit pump printing applications.
Squeegees

Reinforced Squeegees suit pump printing applications.

Consisting of reinforced blade assembly, Permalex-Pro R Series enables high-speed continuous operation for extended high-volume SMT printing. Process adapts steel rod to non-printing edge of squeegee which aids user in handling and assembly and optimizes straightness and durability of squeegee during customer installation and operation.

Read More »

All Topics