Cleaning Products & Equipment

Cleaning Products & Equipment, Materials & Material Processing

Parts Washer suits lean manufacturing environments.

May 02, 2002

Portable AquaCell provides in-process cleaning with one-person operation. It supports one-piece operation and small lot flow; has recirculating spray wash and air blowoff stages; and measures 2 x 5 x 8.5 ft. Portable, self-contained design reduces investment and down time. Read More

Cleaning Products & Equipment

Walk-Behind Scrubber cleans floors.

Apr 30, 2002

Encore L26HD has power forward and reverse; large solution and recovery tanks for longer stay time on floor between cleanups; and two heavy-duty brush drive motors. Parabolic break-away squeegee allows blade changes without tools. Solution and brushes turn off when machine is not moving. All electrical circuits offer breaker protection. Palm pressure controls provide safety against operator... Read More

Cleaning Products & Equipment

Floor Scrubber provides walk-behind cleaning.

Apr 30, 2002

Encore L26 Cylindrical Brush Scrubber cleans grouted surfaces, rough concrete, textured slate, marble, raised rubber disk, and slip-resistant applications of silicate carbide. It has 26 in. dual rotary brush floating scrub deck that cleans deep into grout or multi-surface floors, and recovers debris left on floor while scrubbing. Pre-sweeping is not necessary. Machine's 20 gal solution and... Read More

Cleaning Products & Equipment

Carpet Extractors clean with steam.

Apr 30, 2002

Portable BEXT series of on-board hot water extractors heat water at spray tip to 212 deg F. Compact and lightweight, equipment is easy to load and transport in multi-story buildings on both carpeted areas and multiple surfaces. It has high pressure injection with choice of 300 or 150 psi water pump; industrial three-stage vacuum motor; stainless steel wand; and 15-foot, crush-proof vacuum and... Read More

Cleaning Products & Equipment

Gel removes excess glue.

Apr 30, 2002

Bondini Brush-On Remover Gel removes excess glue from products and fingers. Container includes brush-on applicator. Gel breaks bonds of instant glues, and stays where applied without dripping or requiring extra cleanup. Instant-glue remover is suitable for storing in toolboxes, workbenches, and other space-restricted quarters. Read More

Cleaning Products & Equipment, Portable Tools

Duct Rodders come in any length.

Apr 25, 2002

Available in 1/4, 5/16, 7/16 and 9/16 in. dia, duct rods are supplied in lengths specified by customer. Fiberglass rods, made from E-Glass+ Vinylester, provide high tensile strength and flexibility. Glass-fiber core is reinforced with high-strength resin, and reinforced wrap is added before UV-stabilized, wear-resistant, protective propylene coating is applied. Rods are wound on lightweight,... Read More

Cleaning Products & Equipment

Cleaning Rollers remove dirt from equipment.

Apr 22, 2002

Sticky/Tacky rollers remove dust and particulate in card printers, film systems, and manufacturing equipment. Rollers are available from 1/2 to 5 in. dia and in lengths from 1 to 10 in., and degree of tackiness can be modified to meet specific application needs. Molded to aluminum hubs, custom cleaning rollers can be produced to specific outside diameter and run-out tolerances. Read More

Architectural and Civil Engineering Products, Chemicals & Chemical Processing, Cleaning Products & Equipment, Construction Equipment and Supplies

Floor Repair Material does not spread to surrounding areas.

Apr 19, 2002

F-161 MAGIC FLOOR(R) provides permanent repair to indoor or outdoor floors. Application steps includes priming, spreading MAGIC FLOOR into cracks or holes, and compressing. Patch sets up and is immediately ready for traffic. Its shatterproof aggregate and thermoplastic binder material adheres to hard surfaces and hardener prevents tracking onto surrounding concrete. Read More

Cleaning Products & Equipment, Fluid & Gas Flow Equipment, HVAC, Welding Equipment & Supplies

Vacuum offers 99.997% filtration efficiency.

Apr 19, 2002

P300 portable dust extraction unit has manual reverse pulse filter cleaning system with filter life of 6,000 to 8,000 hr. It includes automatic start/stop for pneumatic tools, noise reducer, adjustable handle, and 4 wheels. Unit operates on 110 to 120 V and is suitable for cleaning workshops, on-tool extraction of grinding and sanding dust, and on-torch welding fume extraction. Read More

Cleaning Products & Equipment, Materials & Material Processing

Parts Washer cleans with hot water.

Apr 15, 2002

Model 45E Aqueous Parts Washer cleans parts with hot water, biodegradable detergents, and high-flow nozzles. Parts are usually clean and ready for use in 10-15 min. As needed, its Wastewater Disposal System evaporates wastewater and can reduce waste stream up to 95%. Read More

Cleaning Products & Equipment

Wet/Dry Vacuums operate at 150 mph.

Apr 10, 2002

RIDGID(R) vacuums are available with 2 to 6.5 peak hp in 6 to 16 gal capacities. Each has blower wheel that provides maximum power in either vacuum or blower modes, pleated filter element with large surface area, and rugged polypropylene drums that are impact and corrosion resistant. All models convert to powerful blower with minimum 150 mph blowing velocity. Accessories are available including... Read More

Cleaning Products & Equipment, Material Handling & Storage

Floor Brushes will not warp, crack, or split.

Apr 10, 2002

Perma-Sweep(TM) floor brushes are manufactured with synthetic block that will not house contaminating bacteria. Filled with synthetic material that is acid, fungus, and liquid resistant, brushes can be used under wet or dry conditions. They are available in 18 and 24 in. with three different types of fill for smooth, medium, and coarse sweeping. Perma-Flex(TM)threaded plastic end handle will not... Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment

Desiccant Dryer uses Modular Electronic Controller (MEC).

Apr 09, 2002

DHA/CDA-PMX heatless desiccant compressed air and gas purification systems are suitable for environments laden with salt or chemicals. Construction includes poppet-style control valves with stainless steel internal parts, flanged manifold with removable inlet and outlet diffuser screens, and 1/8 in. corrosion allowance. Outlet air pressure dew points are rated at -40 deg F (DHA-PMX) and -100 deg... Read More

Cleaning Products & Equipment

Electrical Cleaner is plastic-safe.

Apr 08, 2002

NoSpark fast-evaporating, nonflammable cleaner penetrates and cleans without residue, providing alternative to contact cleaners containing HCFCs. Wetting action penetrates into minute spaces. NoSpark is safe to use on most surfaces and is available in 14 oz aerosol. It is suitable for cleaning electrical parts and delicate mechanisms. Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment

Metalworking Vacuum safeguards employees.

Apr 08, 2002

IW 2050 enables workers to pick up heavy metal scraps and metalworking fluids (MWF) with little danger of escaping aerosols. Once metal pieces enter vacuum, they fall directly to bottom of collection container, while MWFs are suspended in airflow. Resulting hazardous aerosols are trapped by filtration system comprised of open-cell urethane foam filter and oil-absorbent pad. Read More

Cleaning Products & Equipment

Cleaning Station installs in robotic cells.

Mar 21, 2002

QRC®-2000 Nozzle Cleaning Station removes spatter buildup from robotic welding torches. Rotary Impact Drive (RID) system cuts away spatter, allowing cleaned torch nozzle to continue welding process. Pneumatic Drive Exhaust (PDE) cleaning system keeps reamer blade area free of debris. Clamp mechanism ensures positive, secure nozzle clamping for accurate cleaning. Read More

Cleaning Products & Equipment

Upright Vacuums provide high filtration.

Mar 18, 2002

Sensor(R) XP upright vacuums, with automatic carpet-height adjustment, employ 1.6 hp vacuum motors, and are available with cleaning widths of 12, 15, and 18 in. Clean air is discharged with 3-step filtration system that traps 99.6% at 0.3 microns. Exhaust filter catches motor exhaust particles, and bag housing prevents dust from escaping. Vacuums operate at 70 dBA, and include triple-lined bags... Read More

Chemicals & Chemical Processing, Cleaning Products & Equipment, Fluid & Gas Flow Equipment

Refrigerated Dryers are enviromentally friendly.

Mar 14, 2002

Refrigerated Dryers, with capacities from 1000 to 3000 scfm, have working pressures of 200 psig (max). Smooth surface, tube-in-tube, copper heat exchangers resist fouling, and provide heat transfer. All units use R-404a refrigerant, and contain no CFC's. Filtered separator equipped with Filter Monitor is standard on all models. Units also include Demand Manager(TM) microprocessor control system,... Read More

Cleaning Products & Equipment, Machinery & Machining Tools

Scrapers have heavy-duty construction.

Mar 12, 2002

All-metal industrial scrapers have no welds to break, and concentrate their weight toward blade. Up to 9 lb weight enables scrapers to be used as wrecking or demolition tools. Hardened and tempered spring-steel scraper blades are secured by bolts and lock nuts for replacement, and do not twist in scraper-blade holder. Blade lengths range from 3.5 to 14 in. Non-Sparking scrapers, manufactured from... Read More

Cleaning Products & Equipment

High Pressure Washers are steam heated.

Mar 12, 2002

Bigfoot E-X Series uses plant steam as heat source to produce 175 deg F hot water at pressures to 3,000 psi and flow rates to 5.0 gpm for heavy-duty industrial cleaning. It has adjustable temperature control, trigger gun wand, detergent chemical injection system, triplex plunger pump with high temperature valves and packing, adjustable regulator, automatic motor control and heavy-duty frame.... Read More