Sanitary Tank Washers meet USDA, FDA, and 3A standards.
Miscellaneous Washing Equipment

Sanitary Tank Washers meet USDA, FDA, and 3A standards.

Clipdisc clean-in-place (CIP) tank washers offer hygienic design that delivers cleaning action in 360° wash pattern at flow rates from 22 to 67 gpm. They completely remove cheese, whey, and other byproducts from deep and enclosed make vats, finishing vats, and conveyors after manufacturing. Clipdiscs operate at pressures from 20 to 60 psi. Cleaning radii range is 6.5 to 7.5 ft, and wetting...

Read More »
Vacuum Cleaning Equipment

Vacuum Cleaner performs non-stop in harsh environments.

CFM 3997, with direct-drive TEFC motor, collects large amounts of dust and debris without clogging. Materials travel through vacuum's multi-stage filtration system, which utilizes oversized main filters to resist premature filter clogging and help maintain maximum suction power. Materials are then deposited in 46 gallon tank, which prevents workers from having to repeatedly stop production to...

Read More »
Radiator Washer reduces reject rate.
Parts Washing Equipment

Radiator Washer reduces reject rate.

High-volume radiator washer has high velocity blow-off units that reduce cross contamination between process stages, and remove excess water from radiator's inherent dense coil to ensure complete drying capability. Full width interlocking access doors to spray wash stages facilitate maintenance. It has polished stainless steel construction, and natural gas heat for wash, rinse, and dry stages.

Read More »
Wet/Dry Vacuums are CSA listed for industrial applications.
Vacuum Cleaning Equipment

Wet/Dry Vacuums are CSA listed for industrial applications.

MV-1300-OMEV has 1.3 hp motor, 115 cfm rating, water recovery of 9.0 gal, and waterlift of 93 in. MV-1800-OMEV has 1.6 hp motor, 120 cfm, water recovery of 13.0 gal, and waterlift of 96 in. Both have 120 V bypass motor, handle/cord wrap, 25 ft electrical cord, 10 ft hose with swivel, chrome wand, 14 in. wet/dry floor tool, drain hose, high impact poly canister, recessed clamps, friction fit inlet...

Read More »
Tube Cleaning System available in three configurations.
Miscellaneous Cleaning Equipment

Tube Cleaning System available in three configurations.

Wils-Away Pneumatic Systems include pneumatic drive unit, flexible shaft and casing, 6 spiral brushes or expanding brush and refill set, and foot pedal for hands-free On/Off and Forward/Reverse operation. Wils-Away 3000 is a 1 1/2 HP portable unit; Wils-Away 4000 4 HP dolly mounted unit is for heat exchangers, condensers, and small diameter pressure vessels; and Wils-Away 4500 4 HP dolly mounted...

Read More »
Cleaning System prepares concrete and steel surfaces.
Pressure Washing Equipment

Cleaning System prepares concrete and steel surfaces.

Blastrac® 2-20D portable blast cleaning system produces 20 in. blast pattern to strip, clean, and profile surfaces in one step. Designed for medium to large sized jobs, its travel speed is rated to 108 ft/minute. System uses two side-by-side blast wheels, positioned to ensure even pattern. It includes twin 15 HP motors, 8-54 dust collector with eight filter cartridges, and automatic pulse...

Read More »
Carpet Cleaning System extends carpet life.
Cleaning Equipment

Carpet Cleaning System extends carpet life.

Wash & Rinse(TM) extraction system puts down soapy water, scrubs carpet with cylindrical brush, and rinses carpet with clean water, removing both soap and dirt. System is available on Image 26B and 26E models, and is suitable for high traffic areas or in situations where carpets re-soil faster after being cleaned due to residual soap being left in.

Read More »
Parts Cleaner includes pneumatic, air-logic system.
Parts Washing Equipment

Parts Cleaner includes pneumatic, air-logic system.

L-Series Liftkleens full-immersion devices combine vertical lift agitation and pump-jet cleaning action to ensure effective cleaning of intricate parts, blind holes, and other hard to reach features. Cleaning units, with one-touch control, have emergency stop buttons, anti-tie down devices, and integrated lid and lift platform. Units are capable of hot or cold cleaning with lift platforms up to...

Read More »
Lightweight Vacuum is easy to use.
Vacuum Cleaning Equipment

Lightweight Vacuum is easy to use.

Dual Suction System(TM) commercial vacuum weighs 9.0 lb, making it easy to operate, lift, transport, and store. Dual fan suction system provides two dirt paths, edge cleaning, and 13 in. cleaning path. It has 6A motor, ergonomic handle providing secure grip for user comfort, and built-in on/off switch to eliminate continual bending. Top zipper polypropylene bag eases removal and replacement of...

Read More »
Single Arm Attachments provide ease of adjustment.
Air Cleaning Equipment

Single Arm Attachments provide ease of adjustment.

Single articulated source capture arm attachments for TM 1000 TaskMaster Air Cleaner are available in 8 and 10 ft lengths with 6 or 8 in. dia. Suited for capturing pollutants in applications such as welding, cutting, and grinding, arms are externally supported. Other attachments include downdraft table, dual articulated arms, backdraft table, and flexible hose. TM 1000 TaskMaster utilizes 120 V...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers