Spring Clamp Blocks have Class I, Zone 1 approval.
Terminal Blocks

Spring Clamp Blocks have Class I, Zone 1 approval.

The fasis Series spring clamp terminal blocks meet UL 2279 hazardous location requirements with exception of disconnect and fuse terminals, which compromise no spark requirements of Class I, Zone 1 approval. Series includes feed-through, ground, double-tier, and miniature blocks for variety of control applications. Zone 1 approval covers use of terminals in Zone 2 applications also.

Read More »
Hand (Tool) Clamps

Carpenter's Tool holds up cabinets, drywall, and ceilings.

T-JAK(R) support plate is suitable for installing cabinets, drywall ceilings, crown molding, and ridge rafters. Once in place, it can be locked by straightening adjustment knob, then tightening it. Support can adjust from 53 to 84 in. and support loads up to 400 lb. Assortment of extensions increase span up to 10 ft. Also available is Mini-Brute(R), which has a range of 15 to 24 in, to install...

Read More »
Hold-Down Clamps withstand abuse.
Hand (Tool) Clamps

Hold-Down Clamps withstand abuse.

Series HDV Heavy Duty Vertical toggle clamps have hardened-steel axles and forked lower handles consisting of heavy-gauge, precision, alloy-steel castings. Holding capacities range from 660 to 5200 lbs. Variations include weldable arms, adjustable U-bars, T-handles, and stub-nosed arms for welded extensions.

Read More »
Pre-Opened Tension Clamp is clip-less.
Electrical Connectors

Pre-Opened Tension Clamp is clip-less.

NORMACLAMP(R) FBSC constant-tension clamp compensates for changes in hose diameter due to fluctuations in temperature. One-piece design seals and automatically re-tightens when hose diameters increase or decrease. Integrated retaining mechanism holds clamp open during assembly. Chrome-free, corrosion-resistant coating is suitable for gluing. Clamp is available in various diameters with 12 and 15...

Read More »
Expansion Arbors help grind gears.
Tool Holders

Expansion Arbors help grind gears.

FORTIS arbors clamp work pieces or tools for gear grinding and hobb sharpening. High inner pressure when actuated stretches steel concentrically, providing constant clamping and vibration dampening. Total indicator run out is less than 0.00012 in. Concentricity of arbors is maintained within 0.005 mm between OD and ID. Arbors are sealed against contamination, allowing them to be used in machining...

Read More »
Spring Terminator fits chassis-mount applications.
Terminal Blocks

Spring Terminator fits chassis-mount applications.

DIN rail-mounted 869 Series Cage Clamp Compact, with current rating of 20 A at 300V or 5A at 600V, connects 28-12 AWG. Screw-fixing and snap-in mounting options provide safe support to terminal strips. Terminal blocks are assembled into multi-pole terminal strips with standard numbers of poles or can be custom assembled to any length. Marking and jumping options are also available.

Read More »
Reach and Pick Clamps are powered by one external valve.
Power Clamps

Reach and Pick Clamps are powered by one external valve.

Series PS pneumatic slide and clamp units are available in 3 standard stroke lengths, adjustable from full stroke down to 1/2 in. stroke. Clamp jaws stay open until slide is fully extended, and remain closed to ensure panels are not dropped if air pressure is lost. Clamps can be rotated and spherically adjusted to match panel for accurate setup. Shock pads reduce noise and vibration at ends of...

Read More »
Machinable Clamps are available in 5 sizes.
Hand (Tool) Clamps

Machinable Clamps are available in 5 sizes.

Uniforce Clamps have jaws that can be machined to conform to shape of workpiece, enabling user to fixture unusual applications. Steel wedge spreads clamping force uniformly on both sides of 7075-T6 aluminum channel. Locking plate is provided to make clamp rigid while machining jaws to specifications. Clamps use screws from 1/4-20 to 5/8-11, and have clamping force from 500 to 6000 lbs.

Read More »
Tube Gripper snaps into 1/4 in. hole.
Cable Clamps

Tube Gripper snaps into 1/4 in. hole.

Model OFTGSP-1-05-19 Saddle-Pronged Optical Fiber Tube Gripper snaps into 0.093 in. thick panel. Ridges inside holding portion of clip match up to grooves on optical fiber bend limiting tubing, providing strain relief protection and prohibiting tubing from being pulled out of clip. Low profile allows air flow over board, and small footprint takes little space on board.

Read More »
Narrow Pincer fits into confined areas.
Clamps

Narrow Pincer fits into confined areas.

For applying and removing stainless steel clamps, Narrow Jaw Pincer is only 3/8 in. wide, allowing it to fit into tight areas. It is made of forged steel with plastic-covered handles that make gripping easy. Smooth, rotating action of pincer's handles allows tool to operate easily. Applications include retrofit or repair operations, where equipment, appliances, and machinery is constructed with...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers