Power Clamps

Fixture Mounting System suits automated workholding.

Combining Ball Lock mounting technology with hydraulic power, quick-change Hydraulic Ball Lock(TM) System delivers speed of hydraulic clamping with positive mechanical lock. Fixture plates are dropped onto manifold-mounted Ball Lock shanks, which are hydraulically unlocked but lock mechanically. Measuring 25 mm x .75 in., shanks will not release unless hydraulic pressure is reapplied. System both...

Read More »
Hand (Tool) Clamps

Manual Toggle Clamps offer holding capacity of 150-2,400 lb.

Horizontal Handle Hold-Down Action Clamps, Series 2013, 2017, 2027, and 2037, feature ergonomic handle grip, 2 flanged washers, and spindle assembly. Low pivot points provide perpendicular clamp force while straight downward action helps to prevent movement of workpiece in fixture. Knob on end of open U bar prevents spindle slippage. Design facilitates hand clearance in open position, optimizing...

Read More »
Blind Rivet Fastener offers extended grip range.
Hand (Tool) Clamps

Blind Rivet Fastener offers extended grip range.

Available in 3/16 and Â-¼ in. sizes, HuckLok(TM) offers ¼ in. grip range, allowing it to join assemblies from 1/8-7/8 in. thick. After maximum clamp has been achieved from minimum to maximum grip, shear ring breaks free from pin and settles into appropriate catch groove. High-shear, structural steel HuckLok features double-locking design, installs within seconds, and is suited for...

Read More »
V-Band Couplings for Filter and Exhaust Applications
Hose Clamps

V-Band Couplings for Filter and Exhaust Applications

Wadsworth, OH (August 2006) Clampco Products, Inc., a Wadsworth-based manufacturer of stainless steel T-bolt clamps and V-band couplings, offers its line of V-band couplings to original equipment manufacturers in the heavy duty filtration and exhaust markets. Clampco's V-band couplings are engineered to meet the exact specifications for each product application. The V-band couplings, also called...

Read More »
New Patented Manual Toggle Clamps From DE-STA-CO Provide Increased Ergonomics and Holding Power
Hand (Tool) Clamps

New Patented Manual Toggle Clamps From DE-STA-CO Provide Increased Ergonomics and Holding Power

Madison Heights, Michigan, October 5, 2005 - DE-STA-CO's Vertical Handle Hold-Down Action Clamps represent the next generation of manual toggle clamps. The new clamps allow users to save space without compromises in holding capacity or performance. The patented 2002, 2007 and 2010 series of Vertical Handle Hold-Down Action Clamps deliver two to three times the holding capacity of DE-STA-CO's...

Read More »
Clamp is designed to facilitate weld alignments.
Hand (Tool) Clamps

Clamp is designed to facilitate weld alignments.

Machined from heat-treated steel, HOG-TIE(TM) Weld Alignment Clamp delivers up to 15,000 lb of force for holding 2 boiler tubes, pipes, flanges, or plates in place. It consists of 2 clamping jaws and one steel strap. Latter is inserted between 2 sections being aligned, engages clamping jaws, and pulls them together using wrench. Design accelerates setup and releases instantly, while allowing...

Read More »
Clamping System utilizes electro-permanent magnets.
Hand (Tool) Clamps

Clamping System utilizes electro-permanent magnets.

With MAGNOS Clamping System, 5-sided machining is possible at high holding forces, without any interfering contours of clamping device. Pole extensions that act as workpiece support allow user to position different workpieces rapidly and precisely. Uniform clamping force is possible due to poles' quadratic geometry. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be...

Read More »
DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo
Power Clamps

DE-STA-CO to Showcase New, Patented Selection of Automation and Workholding Solutions at ATExpo

Madison Heights, Michigan, July 17, 2006 - DE-STA-CO will feature its entire line of products ranging from manual clamps to automation solutions at this year's Assembly Technology Expo (ATExpo) in booth #611. ATExpo will be held at the Donald E. Stephens Convention Center in Chicago, Illinois from September 26 - 28. The newest product to join DE-STA-CO Robohand's impressive list of automation...

Read More »
Toggle Clamps adjust to workpiece variations.
Hand (Tool) Clamps

Toggle Clamps adjust to workpiece variations.

Self-adjusting toggle clamps, with spring-loaded plungers, apply strong, fixed clamping force throughout adjustment range of 0.20 in. Push/pull clamps automatically compensate for workpiece variations while clamping with known force. Spring mechanisms are totally enclosed in plungers and provide force of 100 to 200 lb.

Read More »
Fixture Clamp provides positive down force.
Hand (Tool) Clamps

Fixture Clamp provides positive down force.

Available in 5 sizes and several styles, Pitbull Clamp features low gripping profile and generates vertical and horizontal clamping forces. It uses standard cap screw and oil-resistant O-ring. Clamp includes tool steel knife edge for aggressive stock removal and tool steel blunt edge for general purpose use. Brass version is available to help prevent marring of workpiece.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers