Tool Holders

Mate Launches Accessories for Amada Punching Machines

Anoka, Minnesota: Mate announces the launch of a comprehensive range of replacement parts and accessories for Amada punching machines. A new 24-page catalog of these products has been published by Mate containing complete specification information and illustrations to facilitate easy ordering. This expanded product range provides another demonstration of Mate's commitment to being a single source...

Read More »
Hose Clamps

CTL Machine pre-installs band clamps onto hoses.

CTL Bowl with automatic opening station features feed bowl system that places CTLs (Constant Tension Light) Band clamps in jaws of pneumatic hose clamp plier, which is activated and deactivated by proximity switches. It then compresses clamp in open position, and allows operator to position hose before closing clamp. Semi-automated machine is suited for applications such as small engines,...

Read More »
Ground Clamps

New Tweco Professional Magswitch Ground Clamp Works for Pipe and Plate

St. Louis, MO (February 12, 2007) - Tweco, the leading innovator in MIG gun technologies, has taken a familiar product - the magnetic ground clamp - and incorporated features that matter most to welders. Available at an everyday lower price, the new clamp design offers a universal style suitable for pipe and plate, whereas previous designs were either for plate or pipe. The new design...

Read More »
Safety Clamp is suited for hygienic/sanitary connections.
Clamps

Safety Clamp is suited for hygienic/sanitary connections.

Used to connect ferrules in sanitary process applications, SH Style Safety Clamp features swing bolt that cannot come off fork of clamp due to vibration and temperature cycling, and cannot unlatch while under pressure or before wing-nut has been sufficiently loosened. Standard in 316 SS, clamp incorporates 2-pin hinge for uniform compression on gasket. It is available for tube OD sizes from 1/2-4...

Read More »
DE-STA-CO to Showcase a Wide Variety of Workholding and Automation Solutions at WESTEC 2007
Hand (Tool) Clamps

DE-STA-CO to Showcase a Wide Variety of Workholding and Automation Solutions at WESTEC 2007

Auburn Hills, Michigan, January 4, 2007 - DE-STA-CO's 2000 series of Horizontal Handle Hold-Down Action Clamps will be displayed in the company's booth at WESTEC 2007. This latest generation of manual toggle clamps will be showcased along with the DE-STA-CO Toggle-Lock Plus Manual Clamp Series, RZA Table-Top Linear Thruster Slide and DPQ Parallel Gripper. DE-STA-CO will be located in booth #4344...

Read More »
MTS Sensors Measure Stroke in Machine Fixture Set-Up Clamps
Position Sensors / Detectors / Transducers

MTS Sensors Measure Stroke in Machine Fixture Set-Up Clamps

CARY, N.C (January 5, 2007) - MTS Systems Corp., Sensors Division Temposonics® C-Series sensors are currently being embedded into actuators of automatic fixture set-up clamps to provide confirmation that the clamp is in position prior to machining, welding or other fabrication operations. Providing accurate measurement of stroke, an embedded C-Series continuous position sensor located inside...

Read More »
Timing Belt Clamps suit long span synchronous drives.
Hand (Tool) Clamps

Timing Belt Clamps suit long span synchronous drives.

Comprised of 16 timing belt clamps designed for long span reciprocating synchronous drives, products are made from polycarbonate resin to address applications where space and inertia are of concern. Products are supplied with stainless steel assembly hardware and accommodate single- and double-sided MXL (A 6M16M...), XL (A 6M 3M...), GT2-2 mm (A 6M51M...), 3 mm (A 6M53M...), 5 mm (A 6M55M...),...

Read More »
Static Grounding and Bonding Assembly has portable design.
Miscellaneous Controls

Static Grounding and Bonding Assembly has portable design.

Bond-Rite EZ makes it possible to establish and verify proper low-resistance (under 10 W) connections in order to safely dissipate static electricity in hazardous locations. Suited for mobile or portable equipment, self-contained device provides and continuously verifies low-resistance bonding connection while displaying healthy condition via flashing green LED on handle of monitoring clamp. It...

Read More »
Hand (Tool) Clamps

Wedge-Activated Clamp is offered with choice of jaws.

Available in different sizes, low-profile OK-VISE clamp is precision ground on all moving surfaces to ensure accuracy and facilitate adjustment. As screw is tightened, clamp expands and simultaneously pulls workpiece down. Heat-treated clamping jaws are serrated to promote grip and are capable of handling rough cut stock and castings. Some models are available with softer jaws for machining to...

Read More »
Clamp prevents disconnection of computer cables.
Cable Clamps

Clamp prevents disconnection of computer cables.

Designed for GX Series of industrial computers, Glacier Clamp provides solid grip on PS/2 and/or USB connection and is suited for harsh environments where extremes of temperature, shock, and vibration are experienced. Clamp prevents connection from accidentally being pulled out or loosening from vibration over time.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers