Clamping Systems

Diaphragm Clamping System is designed for small parts.
Hand (Tool) Clamps

Diaphragm Clamping System is designed for small parts.

VERO-S SPM-138 diaphragm clamping system lets user machine contour of workpiece into SPM unit. When VERO-S module is engaged with Turbo function, SPM-138 unit clamps evenly around outside of part. VERO-S SPM Plus 138 can clamp workpiece sizes from 36–125 mm dia, and- workpieces do not have to be round. SPM unit generates clamping forces up to 50 kN, and repeat accuracy is at least 5 microns....

Read More »
SCHUNK PRONTO Quick Jaw Change System
Grippers (Tools)

SCHUNK PRONTO Quick Jaw Change System

With a change-over time of 5 seconds per jaw, the SCHUNK PRONTO quick jaw change system offers turbo-charged set-up times for all standard lathe chucks with fine serrations of 1/16 x 90° and 1.5 mm x 60°. The quick-change retrofit set consists of support jaws and clamping inserts. It is suitable for O.D. clamping of pre-machined and finished parts. By using the interchangeable insert, the...

Read More »
EXSYS to Spotlight New Gearbox and Vise Offerings at MMTS 2014
Tool Holders

EXSYS to Spotlight New Gearbox and Vise Offerings at MMTS 2014

SAN ANTONIO, Fla.- – In booth 441 at the Montreal Manufacturing Technology Show (MMTS), May 12-14 at Place Bonaventure, Montreal, Quebec, high-precision toolholding, workholding, and gear technology provider EXSYS Tool, Inc. will exhibit a selection of innovative new products including precision EPPINGER gearboxes and modular Gressel vises. Among the established EXSYS offerings on display will...

Read More »
Compact Pin Clamp supports small part location and clamping.
Self-Locking Pins

Compact Pin Clamp supports small part location and clamping.

Suitable for robot end effector welding applications, Model PCT features gapless, dual-finger design that provides linear non-toggle clamp action, clamping multiple parts within 7 mm range. Unit is available with 12–16 mm diameter pins for 2-way or 4-way locating, and bullet or low-profile nose styles. Pin is self-contained in cartridge that is replaceable in field. Steel and aluminum bronze...

Read More »
ROTA NCR Precision 6-Jaw Compensation Chuck
Chucks and Collets

ROTA NCR Precision 6-Jaw Compensation Chuck

The clamping of thin-walled and easily deformed components is challenging. With the ROTA NCR 6-jaw compensation chuck, SCHUNK offers a standard solution for this type of workpiece. SCHUNK has standardized the sizes of the ROTA NCR with diameters up to 1200 mm opening up the possibilities for precision workpiece clamping with large lathe chucks.  The ROTA NCR consists of a central chuck piston,...

Read More »
IP69K Rated Hygienic Clamping Assembly from Ruland
Shaft Couplings

IP69K Rated Hygienic Clamping Assembly from Ruland

Marlborough, Massachusetts – Ruland has developed an IP69K rated patent pending hygienic clamping assembly to help protect food processing, medical and other types of equipment from bacteria buildup. Traditional clamping components such as shaft collars have hot spots such as screw pockets, saw cuts, and surface imperfections where bacteria can grow and spread within the system. These hot spots...

Read More »
Clamping Squares work with modular welding tables.
Hand (Tool) Clamps

Clamping Squares work with modular welding tables.

Pico Rivera, CA U.S.A. — Strong Hand Tools®, manufacturer of innovative Strong Hand Tools® Welding Clamps, Magnets, Pliers and BuildPro™ Welding Tables, is proud to introduce the New BuildPro Malleable Cast Iron Clamping Squares. The 4-face Heavy Duty Clamping Squares feature a total of 26 mounting holes over three surfaces for unlimited options in fixturing with the BuildPro Modular...

Read More »
Hydraulic Toolholder supports milling, drilling, and reaming.
Tool Holders

Hydraulic Toolholder supports milling, drilling, and reaming.

Suited for high volume cutting, TENDO E compact can safely transfer torques up to 384 lb-ft at 20 mm clamping diameter. Universal toolholder provides vibration damping and precise run out accuracy of less than 0.0001 in. at 2.5 x D, protecting machine spindle and cutting tool from damage. Common spindle connections are available, including HSK-A63, SK40, BT40, CAT40, and CAT50 interfaces.

Read More »
Diaphragm Clamping System handles small parts.
Hand (Tool) Clamps

Diaphragm Clamping System handles small parts.

Able to clamp work piece sizes from 36–125 mm in diameter, VERO-S SPM Plus 138 Module allows users to machine contour of work piece into SPM unit. Radial aligned clamping sides of quick-change pallet system pulls in clamping pin and locks it, retracting Diaphragm top plate to hold work piece with up to 50 kN of force and repeat accuracy of at least 0.0002 in. Hardened stainless steel is used...

Read More »
Clamping System Kit works with Haas rotary indexers.
Hose Clamps

Clamping System Kit works with Haas rotary indexers.

Available in kit, modular Unilock Zero-Point Clamping System is specifically designed for all Haas 160 mm platter rotary indexing tables. Equipped with ISM 160 single chuck solution for face of 4th or 5th axis rotary tables, adapter rests between chuck and spindle face of rotary indexer itself. Zero-point clamping uses spring pressure to drive multiple clamping pins against tapered clamping knob....

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics