Clamping Systems

Automatic Clamping Unit is built for reliability.
Tool Holders

Automatic Clamping Unit is built for reliability.

Designed with minimal moving parts, powRgrip® PGU 9500 incorporates proximity switches and other elements that promote reliability and system longevity as well as energy conservation. Exterior design with strategically located key control elements fosters usability and operator efficiency, and all exterior buttons are flush mounted for operator safety and to prevent damage. Interchangeable...

Read More »
Stainless Steel Levers permit torque-free clamping.
Clamping Systems

Stainless Steel Levers permit torque-free clamping.

Offered in inch and metric sizes, GN 927.5 Stainless Steel Clamping Levers with Eccentrical Cam, with Plastic Contact Plate, Tapped Type are used for rapid clamping and releasing operations. Units permit torque-free clamping via combined downward vertical and cam actuated motion. Type A has adjustable contact plate of black technopolymer (Polyacetal POM), glass fiber reinforced, whileÂ- Type...

Read More »
REGO-FIX® Promotes Operator Safety and Tool Security at EASTEC
Tool Holders

REGO-FIX® Promotes Operator Safety and Tool Security at EASTEC

INDIANAPOLIS, Ind. –Â- At EASTEC 2015 in booth 5320, REGO-FIX will feature two of its newer precision tooling products. On display will be intRlox, a small, but mighty innovation for effective tool locking, and secuRgrip®, an anti-pullout tool holding system. The slip-proof intRlox mini clamping nuts feature a frontal milled slot on their outside diameter that mates perfectly to a...

Read More »
REGO-FIX® Spotlights Advanced Toolholding Mix and More at Northwest Machine Tool Expo 2015
Clamping Systems

REGO-FIX® Spotlights Advanced Toolholding Mix and More at Northwest Machine Tool Expo 2015

INDIANAPOLIS, Ind. – At the Northwest Machine Tool Expo 2015 in AI Marketing’s booth 615, REGO-FIX® will highlight several precision tooling products. The company will show a new innovation for effective tool locking and a one-of-a-kind retrofit coolant-through system for live tooling. Also on display will be a toolholding system that enables quick and uncomplicated tool changing, and a...

Read More »
Flexible Toolholder for Automated Tool Grinding
Tool Grinders

Flexible Toolholder for Automated Tool Grinding

The SCHUNK PRISMO3 tool grinding toolholder directly clamps every shank diameter between 3 mm and 20 mm without the use of collet chucks or sleeves. The tool shank is automatically centered in the toolholder during the clamping process. The set-up time is reduced by up to 70% in comparison with conventional multi range grinding toolholders. Regardless of the tool diameter, the X-axis doesn‘t...

Read More »
REGO-FIX® to Promote Precision Tooling Products at PMTS 2015
Adapter Fittings

REGO-FIX® to Promote Precision Tooling Products at PMTS 2015

INDIANAPOLIS, Ind. – At PMTS 2015 in booth 763, REGO-FIX will showcase several precision tooling products, including a small, but mighty innovation for effective tool locking and one of the most accurate cylindrical adapters on the market. The company will also display its one-of-a-kind retrofit coolant-through system for live tooling and a representation of the company’s ER System of collets...

Read More »
Clamping Force Gauge Testit, Clamping Force Measurement over Machine Control
Measuring Equipment

Clamping Force Gauge Testit, Clamping Force Measurement over Machine Control

The clamping force measuring device increases productivity through precise clamping force measurements. The Siemens Sinumerik CNC controllers have been getting the maximum productivity out of each machine for over 50 years. Now they have another partner on their side: the Hainbuch Testit software. It is available on a data carrier for installation on Siemens CNC controllers [Sinumerik 840 D sl...

Read More »
Quick Change Jaw System combines precision and repeatability.
Hand (Tool) Clamps

Quick Change Jaw System combines precision and repeatability.

Comprised of Master Jaw Set ofÂ- 2 Master Jaws, 4 low head socket cap screws, and 5/32” hex T wrench, system, DoveLock™ Quick-Change Jaw System for 4 and 8 in. Kurt vises and towers enables precise jaw changes in less than 1 min and jaw positioning repeatability of up to ±0.001 in. Machinable jaws can be rotated 180° and machined on both sides for 2...

Read More »
Clamping System targets high-speed machining market.
Tool Holders

Clamping System targets high-speed machining market.

Available in standard taper types, REGO-FIX micRun comprises micRun collets, clamping nuts, and toolholders. When used together in compliance with recommended tightening torque, components provide TIR of less than 0.00012 in. at 3 x D. Available with internal or peripheral cooling, micRun features collet locking system that retains collet in nutÂ- to facilitate insertion and removal,...

Read More »
Workpiece Clamping System features modular design.
Hand (Tool) Clamps

Workpiece Clamping System features modular design.

Utilizing quick-change method, CAPTIS Clamping System permits conversion from external to internal clamping in less than 1 minute. Collet changes can be made in 15 seconds. Configurations include: power-operated, rotating CAPTIS collet chuck for turning machines; CAPTIS-D with axial tightening for machining bar stock; CATIS-AF with axially fixed collet and optional workpiece stop for delicate...

Read More »

All Topics