Clamping Systems

Clamping System uses electro-permanent magnets.
Hand (Tool) Clamps

Clamping System uses electro-permanent magnets.

Requiring small amount of electricity, MAGNOS Magnetic Clamping System enables 5-sided machining at high holding forces, without interfering contours of clamping device. Pole extensions act as workpiece support, allowing user to rapidly and precisely position different workpieces. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be tailored to individual requirements....

Read More »
Kurt to Exhibit New USB Data Collection & Control Module and 5-Axis Vise Clamping System at Quality Expo 2007,Donald E. Stephens Convention Center, Booth -7804
Modules

Kurt to Exhibit New USB Data Collection & Control Module and 5-Axis Vise Clamping System at Quality Expo 2007,Donald E. Stephens Convention Center, Booth -7804

Minneapolis, MN: Kurt's 2007 Quality Expo Exhibit will feature new ways to improve quality and productivity using the KurtUSB Data Collection and Control Module and the Kurt VB 5AX100 Schenke 5.1 Clamping System for 5-axis machining. There is a natural synergy between these and all of Kurt's workholding and gaging products," reports Larry Frandson, Kurt Vice President of Administration. "For the...

Read More »
Rotary Indexer Adapter Kit speeds setup times.
Rotary Positioning Stages / Tables

Rotary Indexer Adapter Kit speeds setup times.

Designed to work with Unilock Clamping System, 210 mm Adapter Kit mounts to any rotary table with T-slot faceplate, enabling operators to quickly unlock Unilock chuck and change setups or workpieces. Clamping system preserves repeatable accuracy of .0002 in. or better with retention force greater than 11,000 lb. Since it only takes seconds to open chuck and swap out workpiece or fixture, Unilock...

Read More »
Hose Clamps

CTL Machine pre-installs band clamps onto hoses.

CTL Bowl with automatic opening station features feed bowl system that places CTLs (Constant Tension Light) Band clamps in jaws of pneumatic hose clamp plier, which is activated and deactivated by proximity switches. It then compresses clamp in open position, and allows operator to position hose before closing clamp. Semi-automated machine is suited for applications such as small engines,...

Read More »
Tool Holders

REGO-FIX to Feature Revolutionary Collet System at MD&M West

REGO-FIX to Feature Revolutionary Collet System at MD&M West Indianapolis, Indiana, January 3, 2007 -- REGO-FIX, whose products offer unmatched precision, balancing, and tool life, will feature the new industry standard for toolholding at the Medical Design & Manufacturing West 2007 Exposition. The REGO-FIX powRgrip® collet system, REGO-FIX ER Collet System, and REGO-FIX Swiss Screw...

Read More »
Tool Holders

REGO-FIX to Showcase Wide Variety of Products at WESTEC

Indianapolis, Indiana, January 3, 2007 - The industry standard in toolholding will be on display at WESTEC 2007, as REGO-FIX features the powRgrip® collet system in booth #2428. The revolutionary system will be shown alongside the REGO-FIX ER Collet System and the REGO-FIX Swiss Screw Cylindrical Holders at the WESTEC 2007 Exposition and Conference from March 27 - 30 at the Los Angeles...

Read More »
Clamping Systems

Clamp System helps maximize productivity of press brakes.

Engineered to accommodate virtually any American style press brake tooling without requiring groove, PowerExpress(TM) facilitates press setups by clamping and seating tools in single operation. Once operator loads tooling, one touch of pendant control activates hydraulic action. Within seconds, tooling is precisely clamped and seated along full length of beam. All PowerExpress clamps are treated...

Read More »
Tool Holders do not feature drive keys.
Tool Holders

Tool Holders do not feature drive keys.

Pre-balanced to G2.5 at 22,000 rpm, BT 30 ER 20 series Zero-Z short toolholders have clamping capacity of 0.5-13 mm. Symmetrical toolholder suits woodworking and high-speed machines requiring special taper and offer standard and ultra precision levels of protection.

Read More »
Tool Holders

Dorian Tool International Has Developed the Most Technologically Advanced Turning Tool System in The Industry, The Jet-Stream(TM)

The Jet-Stream(TM), High-Pressure Air or Liquid Coolant Thru tool holder and boring bar system will be exhibited at the IMTS conference from September 6-13,2006 McCormick Place, Chicago, IL USA. Dorian Tool will be located at Booth E-2873. The concept of the Jet-Stream(TM) tool holder is to provide the ability to turn inserts at higher speeds and feeds. With advanced technologies and significant...

Read More »
Clamping System utilizes electro-permanent magnets.
Hand (Tool) Clamps

Clamping System utilizes electro-permanent magnets.

With MAGNOS Clamping System, 5-sided machining is possible at high holding forces, without any interfering contours of clamping device. Pole extensions that act as workpiece support allow user to position different workpieces rapidly and precisely. Uniform clamping force is possible due to poles' quadratic geometry. Pole sizes of 50, 75, and 100 mm are available, enabling holding forces to be...

Read More »

All Topics