WLAN Chips integrate 2-stream 802.11n designs.
Targeting PC and broadband CPE markets, AR9287 PCIe and AR9227 PCI deliver full MIMO transmit and receive performance. Each integrates MAC/baseband and radio transceiver, 2 MIMO power amplifiers and low noise amplifiers, and transmit/receive switch, all on single chip. Suited for mid-tier notebook and netbook PCs, Model AR9287 delivers up to 300 Mbps PHY rates in both transmit and receive modes....
Read More »Mobile WLAN Chip delivers 85 Mbps actual throughput.
Building on ROCmÃ-® Mobile Wi-Fi and Align(TM) 1-stream 802.11n technologies, Model AR6003 achieves up to 48 Mbps TCP/IP in 2.4 GHz band in 20 MHz mode, and 85 Mbps TCI/IP in 5 GHz band in 40 MHz mode. Space Time Block Coding optimizes downlink performance to mobile device, while Low Density Parity Check encoding optimizes uplink performance of mobile clients. Employing Packet Traffic...
Read More »FPGAs integrate 11.3 Gbps transceivers.
With 36 transceiver channels operating from 2.488-11.3 Gbps, Stratix-® IV GT EP4S100G2 FPGAs meet bandwidth requirements for next-generation framer, MAC, bridging, and switching applications for 100-Gigabit Ethernet and 100-Gigabit Optical Transport Networks. Single-chip devices meet IEEE 802.3 standard for 100G systems and offer jitter performance to meet 10G, 40G, and 100G protocol...
Read More »FPGAs integrate 11.3 Gbps transceivers.
With 36 transceiver channels operating from 2.488-11.3 Gbps, StratixÃ-® IV GT EP4S100G2 FPGAs meet bandwidth requirements for next-generation framer, MAC, bridging, and switching applications for 100-Gigabit Ethernet and 100-Gigabit Optical Transport Networks. Single-chip devices meet IEEE 802.3 standard for 100G systems and offer jitter performance to meet 10G, 40G, and 100G protocol...
Read More »
How EDM Controls Ensure Aerospace Validated Processes
Download this white paper to learn more about how wire EDM systems are used to validate aerospace manufacturing processes.
Read More »Six-Core Digital Signal Processor optimizes processing power, energy efficiency.
Targeted at process-intensive applications requiring low power consumption, TMS320C6472 features 6 high-speed C64X+ DSP cores running at 500, 625, and 700 MHz; up to 4.2 GHz/33600 MMACs; and 4.8 MB on-chip L1/L2 RAM. It delivers 3 GHz performance at 0.15 mW/MIPS, and architecture maximizes subsystem performance on chip. In addition to dedicated L1 and L2 memory to each core, C6472 features 768 KB...
Read More »Six-Core Digital Signal Processor optimizes processing power, energy efficiency.
Targeted at process-intensive applications requiring low power consumption, TMS320C6472 features 6 high-speed C64X+ DSP cores running at 500, 625, and 700 MHz; up to 4.2 GHz/33600 MMACs; and 4.8 MB on-chip L1/L2 RAM. It delivers 3 GHz performance at 0.15 mW/MIPS, and architecture maximizes subsystem performance on chip. In addition to dedicated L1 and L2 memory to each core, C6472 features 768 KB...
Read More »
Transceiver is certified to FlexRay(TM) Standard v2.1 Rev B.
Acting as interface between digital logic and copper cable transmission in automotive networks, AS8221 FlexRay Standard Transceiver is capable of transmission rates up to 10 Mbit/sec. RoHS-compliant unit provides all functions to enable integration in electronic control units powered with permanent battery voltage. While microchip is only fed by car battery, it provides wake-up functionality via...
Read More »
Transceiver is certified to FlexRay(TM) Standard v2.1 Rev B.
Acting as interface between digital logic and copper cable transmission in automotive networks, AS8221 FlexRay Standard Transceiver is capable of transmission rates up to 10 Mbit/sec. RoHS-compliant unit provides all functions to enable integration in electronic control units powered with permanent battery voltage. While microchip is only fed by car battery, it provides wake-up functionality via...
Read More »
Four-String LED Driver delivers 150 mA per string.
Suited for LCD TVs, monitors, and automotive displays, high-brightness MAX16814 integrates switching DC-DC controller to generate voltage required to drive multiple strings of LEDs. Four linear current sinks with internal power MOSFETs provide programmable current up to 150 mA per string. Delivering PWM dimming range of 5,000:1 with 200 Hz dimming frequency, MAX16814 optimizes display performance...
Read More »
Four-String LED Driver delivers 150 mA per string.
Suited for LCD TVs, monitors, and automotive displays, high-brightness MAX16814 integrates switching DC-DC controller to generate voltage required to drive multiple strings of LEDs. Four linear current sinks with internal power MOSFETs provide programmable current up to 150 mA per string. Delivering PWM dimming range of 5,000:1 with 200 Hz dimming frequency, MAX16814 optimizes display performance...
Read More »
SpillVak Absorbs Up to 6X More Fluid Than Rock- and Clay-based Absorbents
Are you struggling to find an absorbent that doesn't result in at least some leaching? SpillVak outperforms all rock and clay-based materials. Check out our video to learn more.
Read More »
