Circuits

LIN Physical Interface suits automotive applications.
Transceivers

LIN Physical Interface suits automotive applications.

Stand-alone, local interconnect network transceiver, Model TPIC1021, features ESD protection up to 17 kV IEC and 12 kV HBM. It survives ISO 7637 transients and has fault protection to handle 40 V to 40 V on LIN bus. Unit functions across LIN 2.0 specified data rate up to 20.0 kBit/sec and functions equally well at lower data rates recommended by SAE J2602. To maximize EMI, receiver's input filter...

Read More »
STB Silicon Tuner complies with DVB-S2 specification.
Tuners

STB Silicon Tuner complies with DVB-S2 specification.

Backwards compatible with DVB-S broadcasts, STB6100 Set-Top Box (STB) silicon tuner can be used as part of DVB-S2-ready receiver. It enables manufacturers to use 32-lead package with minimal supporting components and is programmed through 2-wire serial interface. Used in combination with other coding and satellite technologies, product can increase number of standard or HDTV channels that can be...

Read More »
Circuits

FFT Cores optimize silicon efficiency.

Fast Fourier Transform (FFT) cores use fixed-point arithmetic and have been developed using parallel mixed-radix architecture. Products, offered in HyperSpeed FFT and HyperLength FFT designs, provide silicon efficient implementations of FFT algorithm for spectral analysis. They support sample rates to 3.2 GHz and transform lengths up to 256 M-points running in continuous real-time, depending on...

Read More »
Integrated Circuit converts serial data to FAT file.
Circuits

Integrated Circuit converts serial data to FAT file.

Featuring file access speeds to 70 kb/s, ALFAT(TM) IC adds megabytes of data storage to product design. Field upgradeable product incorporates fully-compiled, linked, and programmed 32-bit LPC2114 processor containing full FAT file system stack that enables data to be stored on removable media. All files and directories are saved in FAT file system format to facilitate access from any device that...

Read More »
Boost DC-DC Converter IC drives white LEDs in series.
DC to DC Power Supplies (Converters)

Boost DC-DC Converter IC drives white LEDs in series.

Non-inverting Model A8430 provides programmable constant current output at up to 36 V, which is set with external resistor, and can be varied with PWM signal or control voltage at top of sense resistor when dimming control is required. With input voltage of 2.5-10 V, unit drives up to 5 LEDs at 20 mA from 3.0 V supply. Switching frequency of 1.2 MHz allows use of small external components. Model...

Read More »
Power Management IC supports Xilinx FPGAs.
Circuits

Power Management IC supports Xilinx FPGAs.

Triple-channel, Model TPS75003 is designed for Xilinx's Spartan(TM)-II/IIE/3 series of field programmable gate arrays. It integrates 3 A DC-DC buck controllers with up to 95% efficiency to power Spartan core and I/O rails, and one 300 mA LDO regulator with ceramic output capacitor for powering Vccaux rail or other low-power system voltage. With input range of 2.2-6.5 V, unit features programmable...

Read More »
Driver Chips offer stall detection without encoder.
Circuits

Driver Chips offer stall detection without encoder.

Utilizing StallGuard(TM) technology for stall detection, TMC246 and TMC249 predict overload for applications where reference point is needed but switch cannot be used. Model TMC246 acts as dual full bridge driver IC for bipolar step motor control. User can choose to operate at temperatures to 105Â-ºC or currents to 1.5 A/phase. Model TMC249 is high-current version of TMC246, supporting up to...

Read More »
Battery Charger Controller delivers up to 4 A.
Battery Chargers

Battery Charger Controller delivers up to 4 A.

Standalone switch-mode battery charger controller LTC4002-8.4 charges 2-cell, 8.4 V Li-Ion batteries. For safety and autonomous charge control, product features automatic shutdown, battery preconditioning and temperature sensing, end-of-charge indicator, and 3 hr charge termination timer. Offered in 3 x 3 mm DFN and 8-lead SO packages, current mode PWM controller has 500 kHz switching frequency...

Read More »
AC Measurement IC operates to 500 kHz with 1% accuracy.
Circuits

AC Measurement IC operates to 500 kHz with 1% accuracy.

True RMS-DC converter ICs LTC1967 and LTC1968 measure energy of AC signal regardless of waveform shape. With 0.02% linearity, there is no need for in-system calibration, and delta-sigma computational technique is inherently immune from changes vs. temperature, time, and PCB stress. Rail-to-rail inputs can be driven single-ended or differentially, and rail-to-rail outputs feature separate output...

Read More »
Battery Charger requires no microcontroller or firmware.
Battery Chargers

Battery Charger requires no microcontroller or firmware.

Offering programmable charge current from 0.4-2 A with ±5% accuracy, autonomous Model LTC4060 charges 1-4 cell NiMH and NiCd batteries. Available in 16-lead TSSOP or 5 x 3 mm DFN package with operating voltage from 4.5-10 V, unit uses external PNP transistor to supply current to battery or battery pack. Charger offers 3 options for terminating charge cycle: negative deltaV, max voltage, or...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers