EL Lamp Drivers target handheld wireless devices.
Model HV835 dual segment low noise electroluminescent (EL) lamp driver features independent input control for lamp selection, 160 V peak-to-peak output, 2.0-5.8 V input supply, and drives two EL lamps with combined area of 3.5 sq in. Designed to drive single EL lamp up to 5 sq in., Model HV857L high voltage driver features circuitry for reduced audible noise, 190 V peak-to-peak output, and output...
Read More »Multimedia SoC suits portable electronics.
Built on 0.18 micron process, mixed-signal multimedia system-on-a-chip (SoC) utilizes audio decoding and power management technologies. It supports USB 2.0 transfer rates, image storage and display, battery charge protection, and video display. Compatible with APE and OGG audio formats, as well as MP3 and WMA formats, product also works with Windows Media Digital Rights Management v10, Media...
Read More »
Reference Design is suited for 60 W power adapters.
Used for 60 W adapters powering consumer electronics, GreenPoint(TM) reference design meets standby and active mode energy efficiency regulations. It addresses all functional blocks of power adapter and achieves 88% energy efficiency. In standby mode, it consumes under 250 mW of power. Enabling device, NCP1337 PWM current-mode controller, combines true current-mode modulator and demagnetization...
Read More »
System-on-Chip offers Ethernet and fieldbus connectivity.
With available network stacks, netX System on Chip (SoC) can be Master or Slave for Ethernet and fieldbus technologies in industrial control products that require built-in network connectivity. Product can also be used as network co-processor, leveraging protocol stacks and interfacing to host via dual port memory, USB, or serial. Along with various peripherals, SoC features processors that can...
Read More »
CMOS LSI Chips feature Cu/low-k multilevel interconnects.
Featuring seamless low-k stack structure without any high-k silica layers, 45 nm node CMOS Basic Circuit Modules possess high-speed 5 GHz-clocked LSI operation potential at 0.9 V, making them suited for next-generation supercomputers and network servers. Parasitic capacitance of 140 nm pitched lines has been reduced to 85 fF/mm with effective dielectric constant of keff=2.99
Read More »Watchdog ICs target automotive and industrial applications.
Incorporating multi-mode windowed watchdog timer, Models EM6152, EM6152A, and EM6153 include reset logic and 5 V low dropout automotive voltage regulators with up to 400 mA output current. Automotive qualified according to AEC-Q100, circuits support operation from -40 to +125-
Read More »
Multifunction IC has battery charger and buck converter.
Supplied in 3mm x 3mm DFN package, LTC4080 integrates USB-compatible battery charger that can charge single-cell Li-Ion battery up to 500 mA without overheating device or surrounding components. IC also incorporates 300 mA standalone linear buck converter that features selectable mode operation and synchronous rectification to achieve efficiencies up to 96%. It operates from 2.7-5.5 V input and...
Read More »Decoder extends mobile multimedia processor capability.
Designed for use with MIPI CSI-1 and SMIA CCP2 class 0 serial interfaces, Model STCCP27A converts serial data stream from mobile phone's camera into parallel data for baseband processor. Device provides level shifting for bidirectional I2C control lines, allowing connection of 2.8 and 1.8 V I2C busses without external components. Housed in 3 x 3 mm micro-TFBGA25 package, RoHS-complaint video...
Read More »Bridge Chip is compact for limited space applications.
Single-port uPD720405 PCI Express-to-PCI/PCI-X bridge chip is available in 17 x 17 mm BGA that fits in cards with heights as low as 64.41 mm. Featuring 2 W power consumption, chip is designed for networking and storage applications in workstation and motherboards. Operating at 133 MHz in single data rate PCI-X mode or 66 MHz in 64-bit PCI mode, chip features dual power supply and supports x4 PCI...
Read More »ARM9-Based MCU supports migration from ARM7-based MCUs.
Suited for image processing applications, AT91SAM9260 supports deterministic, real-time operation; offers supervisory functions; and has third-party RTOS support. Microcontroller shares same programming model as ARM7(TM)-based controllers, allowing direct migration between controllers based on different ARM-® cores. Along with 12 Mbps USB 2.0 device and host controller, product features 200 MIPS...
Read More »
Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission
Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.
Read More »
