New Circuits Products

ApaceWave Introduces the APW-2000 Mobile WiMAX Wave 2 Baseband SoC

New WiMAX chip supplier delivers an advanced SoC with an Integrated Supply Chain approach that provides best Price/Performance products FREMONT, Calif. and BEIJING, Sept. 10 / / -- ApaceWave Technologies, a developer of high-performance baseband processors for the global WiMAX industry, announced its APW-2000 Mobile Station System-on-a-Chip (SoC) at the WiMAX Summit in Beijing. The APW-2000 is a...

IC delivers high-accuracy touch screen performance.

With flexible PSoC mixed-signal array architecture, PSoC-® CapSense(TM) is suited for both small screen portable devices and larger screens. It enables designers to implement various functions such as driving LEDs, backlight control, motor control, power management, I/O expansion, accelerometers, and ambient light sensors. Available with CY8C20x34, CY8C21x34, and CY8C24x94 device families, unit...

Charge Pump drives 7 white LEDs.

Offered in 16-pin, 3 x 3 mm QFN package, Model TPS60250 charge pump DC/DC converter offers programmable current with I2C interface and drives up to 5 LEDs for main display and 2 LEDs for sub-displays. It features auto-switching between 1x and 1.5x mode charge pump, 3-6 V input voltage range, 64 dimming steps with 25 mA maximum, 4 dimming steps with 80 mA maximum, 2% current matching for sub-LEDs,...

Clock Generators range from 1-4 phase-lock loops.

With low jitter at 60 psec, CDCE9xx and CDCEL9xx family of clock generators generate up to 9 output clock sources from single input frequency. Each output can be programmed in-system for any clock frequency up to 230 MHz. CDCE9xx offers 2.5 or 3.3 V outputs and CDCEL9xx offers 1.8 V outputs, enabling low-power capability needed for portable devices. Products provide programmability options...

Custom Presentation Kits - Elevating ideas from conception to creation!

To find out more about how you can get a custom presentation kit tailored to your exact needs, download this whitepaper now.

Single-Chip Multi-Band RF Synthesizer operates up to 5 GHz.

Supplied in Pb-free VFQFN-28 packages, STW81103 features embedded VCOs with automatic center-frequency calibration that provide multi-band functionality; single device spans 625-762.5 MHz, 1,087.5-1,525 MHz, 2,175-3,050 MHz, and 4,350-5,000 MHz ranges. Phase-noise values are 0.27-

DTV Solution delivers blur-free HD video.

TC90240XBG uses low-voltage differential signaling connectivity to take 60 Hz video signal from LCD TV's MPEG decoder, and, using combination of motion estimation and motion compensation, builds additional frames needed to drive LCD panel at 120 Hz refresh rate. Supplied in PBGA-564 31 x 31 with 1 mm ball pitch package, unit features I2C programming interface and built-in memory controller that...

Digital Video/Audio SoC utilizes 65 nm process technology.

BCM7405 digital set-top box-on-a-chip supports wide range of video compression standards including VC-1, WMV9, H.263-H.264, MPEG-4, SVP technology, and DIVX as well as digital rights management solutions including Microsoft-® DRM10 and Marlin JDA. Utilizing 1,000 DMIPS dual-core MIPS-® processor, device features multi-stream HD networking capabilities and dual SATA-II interfaces. It also offers...

ICs protect portable devices during battery charging.

Featuring input over-voltage threshold of 5.85 V, model bq24314 programmable battery charger front-end IC protects lithium battery when charger circuit fails due to fault condition and can report status of fault to host or application processor. Model bq24316 supports up to 6.8 V threshold. Both 2 x 2 mm safety circuits protect cell phones and other portable electronic devices from input...

Digital TV Receiver converts ATSC broadcasts to NTSC signals.

Broadcom-® BCM3543 ATSC receives ATSC HDTV broadcasts and converts them to NTSC (National Television Systems Committee) signals, converting all ATSC standard and HD inputs to 480i output formats for display on analog TVs. It also features Channel 3 or 4 RF modulated output, EIA/CEA-909 smart antenna support, and keypad and remote control support. Antenna requires single cable interface and is...

SD H.264/AVC Video Encoder is suited for global use.

Featuring sustained processing speed of 400 GOP/S and transmission rates with latency under 50 ms, BE7400 enables real-time SD video transmission for broadcast, post-production, and IPTV applications. Scalable, fully programmable SD broadcast encoder has 4 independent channels that can be processed simultaneously and supports up to 4 stereo audio programs per video channel; each channel is...

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.